开云体育

Unfortunately groups.io has not lived up to its potential of being the next big yahoo group type of website and also was never able to publish all the great content downloaded from the old group that

I guess not. I joined the S2 sailboats group on Facebook. It's a pretty good resource for S2 owners.?

Is this group still active? This email has been checked for viruses by Avast antivirus software. www.avast.com

Once the group moved to a new host I can’t get in Brian Nicholson 865 216 0629

I haven't seen a post in over a year? Sent while mobile

I sent a group invite to groups.io to transfer to the new group. Mark

There are about 40 S2 27 owners, out of 85 boats, represented in this Yahoo Groups list. We have a proposal from Ryan to change the list server to groups.io, in fact Ryan

Thanks for getting back to me Mark, only thr admin/owner can send invites. Thanks, ryan

Ryan, My name is Mark Endicott, I inherited this list a couple years ago when the founder sold his boat and wanted out. I still have my 27 but my sailing days at limited. How about I make you the

I have not seen anyone in this group post about this yet. What are our plans? As of December 14 all previously posted content on the site will be permanently removed. I have payed for

Yeah, I have a traveler that a previous owner and poster on this site installed. It works great and I tend to lock the sheet and play the traveler upwind, too. But, I really didn't like the setup of

Yeah, I swapped it out for something more traditional.

My boat has a harken replacement traveler and its fantastic. We set the sheeting and play the traveler in gusts to keep the boat at a good heal and works wonderfully.

Congratulations. I agree that main sheeting system looks like garbage

Hello, all. I just purchased a 1986 S2 27 set up in the "cruising" layout. I'll be sailing in the middle Chesapeake Bay with the boat in a slip just off the Magothy River. We delivered it to its new

Thanks, Doug, that's great information.? I am also glad to hear that your Raymarine autopilot had no issues with controlling the rudder after the installation.? I have an old Raymarine Autohelm ST

Glad it helps. My sketch is poor. The dotted lines through the rudder gudgeon are supposed to represent the exact same diameter as the MC bushings OD ( 7/8"). All four bushings should be the same

Thanks so much Doug. This is really helpful information, and it sounds like a great, long-term solution. Much appreciated! I hope you are enjoying your Cal 33. ? Dave S. s/v Clio 1987 S2 27, hull

After some digging I found a sketch I made and the McMaster-Carr part numbers/drawings. I recall that it helped, when installing on the boat, to loosen the smallish through-bolts that hold the

I have been through this with my S2 27 which I no longer own. I don't believe original replacement bearings are available anywhere. But what I did was as good or perhaps better than the original