#22908

Hello,

Is the pressure set point known for the oil switch located on the gallery take-off housing on the block? I'm trying a single wire alternator on my S2 so no path for current through the "Ignition" warning lamp. Figure I could feed through an NC pressure switch if the set point isn't too high, would serve to warn if ignition on, engine off.

Cheers
Steve?

#22913

Of course the question is moot if the switch is of the normally open type.

#22914

Turns out the swicth is normally open, won't serve in this case.

#22915

开云体育

You need to be more receptive. If it identifies as NO, you have to learn to accept that…..

?

{I’m sorry. I can’t say that with a straight face…}? ?

?

Bill

?

Show quoted text

From: [email protected] <[email protected]> On Behalf Of wigl@...
Sent: Tuesday, June 27, 2023 3:32 PM
To: [email protected]
Subject: Re: [S1S2euroS3LotusEspritOwners] Oil Switch, Federal Spec

?

Turns out the swicth is normally open, won't serve in this case.

Virus-free.

#22916

To quote one of many non-PC jokes made by a hockey buddy, A "No" is just a pre-unconcious "Yes".

Yikes.?