¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. RigExpert-Family
  2. Topics

Antscope2 not working properlyin nanovna #antscope2

 

So far i have used antscope2 in my nanovna-h since its support nanovna. Suddenly antscope2 failed to work with nanovna.
It recognized and connected to nanovna under settings menu. Run ''single' and "continuous" are not? highlighted.
Previously it was working nicely in my win8 laptop. Both of nanovna-h's returned same issues in antscope.

Note - they are working in nanovnasaver
 

¿ªÔÆÌåÓý

Hello.

Works to support all versions of nanoVNA analyzers in AntScope2 is planned for early 2021.

31.12.2020 20:13, Praba Karan §á§Ú§ê§Ö:

So far i have used antscope2 in my nanovna-h since its support nanovna. Suddenly antscope2 failed to work with nanovna.
It recognized and connected to nanovna under settings menu. Run ''single' and "continuous" are not? highlighted.
Previously it was working nicely in my win8 laptop. Both of nanovna-h's returned same issues in antscope.

Note - they are working in nanovnasaver

 

On Thu, Dec 31, 2020 at 10:13 AM, Praba Karan wrote:
So far i have used antscope2 in my nanovna-h since its support nanovna. Suddenly antscope2 failed to work with nanovna.
It recognized and connected to nanovna under settings menu. Run ''single' and "continuous" are not? highlighted.
Previously it was working nicely in my win8 laptop. Both of nanovna-h's returned same issues in antscope.

Note - they are working in nanovnasaver
A few questions:

1.? Have you updated the firmware in your NanoVNA recently? Hugen or edy555 updates are OK but he DisLord firmware has changed the way frequency sweeps are done from the PC.

2. What version of AntScope2 are you using?? Have you updated since the NanoVNA was last working with AntScope2.

-----------------------------

One thing I would try is to delete the AntScope2.ini file in Windows.? That will reset all your AntScope2 settings to the default values when you first installed it.? ?This file is in the Appdata directory in Windows.? You will have to search for it.
 

Answer for both questions are no .
Firmware is stock one.

On Fri 1 Jan, 2021, 3:17 AM Doug VE7DXK, <ve7dxk@...> wrote:
On Thu, Dec 31, 2020 at 10:13 AM, Praba Karan wrote:
So far i have used antscope2 in my nanovna-h since its support nanovna. Suddenly antscope2 failed to work with nanovna.
It recognized and connected to nanovna under settings menu. Run ''single' and "continuous" are not? highlighted.
Previously it was working nicely in my win8 laptop. Both of nanovna-h's returned same issues in antscope.

Note - they are working in nanovnasaver
A few questions:

1.? Have you updated the firmware in your NanoVNA recently? Hugen or edy555 updates are OK but he DisLord firmware has changed the way frequency sweeps are done from the PC.

2. What version of AntScope2 are you using?? Have you updated since the NanoVNA was last working with AntScope2.

-----------------------------

One thing I would try is to delete the AntScope2.ini file in Windows.? That will reset all your AntScope2 settings to the default values when you first installed it.? ?This file is in the Appdata directory in Windows.? You will have to search for it.
 

On Thu, Dec 31, 2020 at 03:16 PM, Praba Karan wrote:
Answer for both questions are no .
Firmware is stock one.
You did not say which version of AntScope 2 you are using.?

Have you tried the latest version posted on the RigExpert site?

Did you try deleting the AntScope2.ini file as I suggested?? Uninstalling the program and reinstalling does not delete this file.? I have had several bugs in AntScope2 corrupt this file and I had to delete it to get things working again.
 

Nice to see this good news, waiting for it, nice software .

1 - 6 of 6