开云体育

Nice to see this good news, waiting for it, nice software .

I am measuring several objects with varying connections & freq ranges. It is tedious to re-calibrate each time I make a change. Antscope 2 will load a calibration file but there does not seem to be a

Pat, you can always ask me. Typically, no drivers are needed. But sometimes Windows 10 sometimes shows its "nasty character" and refuses to install the driver. For data exchange, the analyzer uses a

Alex, That works! I appreciate your prompt and easy solution! I wasted hours trying to resolve this myself with no results. I looked for and did not see drivers available on the Rigexpert.com web site

Pat, Try downloading and installing drivers from here: https://www.ftdichip.com/Drivers/CDM/CDM21228_Setup.zip 16.01.2021 23:06, Pat - W0YES пише:

Alex, Serial Number 00173. Firmware version 1.94. From the opening screen on the analyzer. ~Pat Sent: Saturday, January 16, 2021 3:00 PM To: [email protected] Subject: Re: [RigExpert Family]

Dear Pat, Please tell me the serial number of your analyzer. Regards, Alex

I have a new Dell Desktop PC and cannot get the USB drivers to install.? When I plugin the analyzer with USB cable the computer shows the drivers being installed successfully.? Looking at Windows

Ken, Yep, you've nailed the quandary of Yuri's "wait and see" approach to Rig Expert's advertising BT and offering new BT products but not actually making BT work as the adverts promise. If you look

Frank, Yes you did help out with the diagnosis of this problem .? I only use Windows 7 and Windows 8.1 and I appreciate your help on testing on Windows 10.? All versions of Windows had the same

Hi Yuri I think the issue at hand is that we did pay extra for Bluetooth feature. Mine was $299 -vs- a $238 price listed after I discovered the problem. There is a limit for free returns. If this is a

Yuri, “If you can help, please do so, like Doug VED7DXK is doing.” Did you actually read my post? Doug AND I have done extensive testing. We have sent Alex actual data files. What have you done?

Frank, with all due respect, I think your words are a bit too strong. I personally think that we have to give RigExpert guys in Ukraine some credit. Some of the retired folks have no idea how it is to

- ken - K4EES

Hi Bruce, Sadly, this is nuts. No commercial Bluetooth installer should need manual reconfiguration of BT com ports. Period. Doug VE7DXK and I have continued to test the AA-55 Zoom BT with Antscope 2

I have the AA230 unit and when I connected it to USB the PC created a Com Port in the Ports tree and created a USB Serial Converter in the USB Controllers tree which is the correct operation. The

I have the AA230 unit and when I connected it to USB the PC created a Com Port in the Ports tree and created a USB Serial Converter in the USB Controllers tree which is the correct operation. The

You did not say which version of AntScope 2 you are using. Have you tried the latest version posted on the RigExpert site? *Did you try deleting the* *AntScope2.ini file as I suggested?* Uninstalling

Answer for both questions are no . Firmware is stock one.

A few questions: 1.? Have you updated the firmware in your NanoVNA recently? Hugen or edy555 updates are OK but he DisLord firmware has changed the way frequency sweeps are done from the PC. 2. What