开云体育

I was trying to update my Rig stick AA-230 I download software and went to open it to make a bin It didn't work. My rig stick keeps buzzing when plugged in. Richard

Hi Ken, No, I haven’t updated to ver. 1.3.3 yet. I did not want to do that during the summer when I was in the middle of running tests on several antennas. (Never touch a running system). I will

I see that you are using AntScope2 v1.2.6. I have installed v1.3.3. There might be a difference. You are correct that "Data From AA" is grayed out until the analyzer is connected. But Settings in

OK, tnx for the update Ken. Great progress! That is correct, with the ZOOM the Device manager does not associate the analyzer with the com port. It should show some com port (mine shows ‘3’).

Hi Rick, I have the AA-230 Zoom BLE. My computers are Windows 10 and Windows 11. I just installed AntScope2 v1.3.3 on both computers. I flashed the Rom in the AA-230 with version 1.120. Now AntScope2

Ken, do you have an AA-230 or an AA-230-ZOOM? If it is a ZOOM, then the Device Manager shows: see [jpeg AntScope-DevMgr.jpg]. (In my case it is COM3.) If it is the older (no ZOOM), then the most

Well, now after a week, AntScope2 does not see the port for the AA230 and can't connect. When I plug the analyzer into a USB or unplug it, I hear the Ping from Windows 11. But I don't see any ports in

Hi Ken, It makes no difference whether you start AntScope-2 before or after plugging in the AA-230… at least not with my AA-230 ZOOM / Windows 10 Pro / 64 bit. As for something crashing/hanging in

The first time I connected my AA230 Zoom BLE to a USB port on my laptop and tried to connect with ANTSCOPE2, the AA230 shut down. It could not be started with the Panel On/Off button. I had to remove

Hi all, I have a WTI-1 Wireless Transceiver Interface for sale. $75 shipped 48 states. Rig Expert Interface Cablesets available for $25 each shipped lower 48: YS-009 (For Yaesu FTDX-9000D) - 2 YS-007

I am not sure where to offer a proposed new capability for Antscope2 so am writing it here. If it is possible, without too much trouble, or disturbing other areas of the code, to add the ability to

Dick, my apology for slow follow up.? I was in a location without internet (well it has internet but I don't pay for it there). The band bars in Antscope2.exe are gray.? However, I did like the

Mike, are you saying you managed to change the band bars, or you ‘wish’ to change their color? Rick Sent: 21 September 2023 16:42 To: [email protected] Subject: Re: [RigExpert Family]

I don’t think they can be changes. Sent: 21 September 2023 16:12 To: [email protected] Subject: Re: [RigExpert Family] setupreantscope2-1.3.0.exe (Antscope) does not run after install on

Also, Rick, I am glad you have the AA-54 up and running on Antscope 2. Now, I could change the band designation bars that are gray from a color wheel that would be great!

Rick, Thanks for the pointer.? I just did change it. Question, can I customize the bars that show the band zones?? ?The are currently gray, but, I would like to change them to a different color?

Mike, You can invert the color scheme of the graph in setup. It will be better for online viewing if you select “light” instead of “dark”. 73 – Rick, DJ0IP Sent: 21 September 2023 15:06 To:

Mike, I have been using 1.2.6 since it launched. I use it with my AA-230 ZOOM. It installed and ran first pass. However, it was not recognizing the AA-54 at all. Thanks to your reminder, I checked and

Rick, Good questions all: So, I uninstalled antscope2-1.3.0 and dropped back to the version I had installed on Windows in June for Field Day, v.1.2.6 which had worked with my AA-54. I just finished

Mike, are you sure you were running it with AntScope? The data file formats are different between AntScope and AntScope2. I cannot read AntScope files with AntScope-2. However, I can open AntScope