|
Re: AntScope2 with AA-230
#antscope2
Yes Rick,
?
For AntScope2 there is no need to specify the analyzer model.
Only choose the right serial port in the settings.
?
Unfortunately, at the moment I do not have access to a PC with Linux, I can not take a screenshot for you.
?
Alex |
|
Re: AntScope2 with AA-230
#antscope2
Thanks for the quick rely Alex.
I have installed AntScope2? v1.0.17 on a Linux Mint machine. The computer recognizes when a "new" serial device is connected and assigns a port as expected.? Unfortunately, AntScope2 does not recognize that the AA-230 is connected? According to Linux a new port ttyUSB1 has been created? In previous versions of AntScope I needed to specify the analyzer model. Is this no longer required in AntScope2? I'd appreciate your thoughts.? Thanks. -- 73, Rick VE7TK |
|
Dear friends!
?
The information in this post will be useful for owners of the Stick230 analyzer.
We continue to complement the analyzer functionality with various modes.
And today our engineers added 4 new features to the Stick230 firmware:
- TDR. This mode allows you to show at what distance in the feeder line heterogeneity (damage) is found.
- cImp: measurement of cable impedance
- cLoss: cable loss measurement
- cLen: measurement of cable length
?
This firmware is in test mode.
I invite all owners of the Stick230 analyzer to take part in testing.
To do this, follow these steps:
- download the firmware file from this link
- download the FlashTool utility:?
- connect your analyzer to the PC
- run FlashTool and specify in the settings the update from the local file.
- indicate the path to the downloaded file with firmware
?
After a successful upgrade, new features will be available.
You can turn on the screen with new functions by briefly pressing the red square key.
The operation of all functions is intuitive. A long press of the green triangle key in the window of the selected function will bring up a screen with a hint.
?
Please write here all your questions and suggestions.
?
Sincerely, Alex Antonov UR4MCB
|
|
Re: AntScope2 with AA-230
#antscope2
Hello Rick,
?
Yes, we have a version of AntScope2 for Linux. We tested this version on Ubuntu and Mint distributions.
?
AA-230 analyzer uses a FTDI chip for data exchange. Drivers for this chip are standard on any Linux distribution.
You can also download and install the driver yourself:?
?
Regards, Alex Antonov UR4MCB |
|
AntScope2 with AA-230
#antscope2
I am making some major changes and will be putting AntScope on my Linux computers.?
Previously I had AntScope on a Linux machine and it took a while to get it to like ttyUSB1. I see that AntScope2 has a Linux version. Will my AA-230 run with? AntScope2 for Linux? Thanks, 73, Rick VE7TK |
|
Re: Meet the AntScope Application for iOS!
#antscopeforios
Very slick! The firmware upgrade is important and once done my iPhone married up with the AA-230 Zoom FB. Glad you moved over to groups.io Alex.
|
|
Re: Meet the AntScope Application for iOS!
#antscopeforios
Hello!
?
AntScope application for iOS and Android are designed to connect analyzers with a Bluetooth module.
AA-600/1000/1400 analyzers don't have a Bluetooth module.
But! In the very near future we will release new Zoom analyzers that will replace the AA-600/1000/1400
The plans: AA-650 Zoom, AA-1500 Zoom. These analyzers have a Bluetooth module.
?
Let me remind you. The number in the analyzer name is the maximum measuring frequency.
?
Regards, Alex UR4MCB |
|
Re: Meet the AntScope Application for iOS!
#antscopeforios
Is there any plan to make some add on to go between AA-600 and iOS ?
|
|
Firmware for RigExpert devices.
#firmware
Dear friends!
In the Files section of our group, we added files with all available firmware for RigExpert devices (analyzers and interfaces).
?
Please note the following information. Some files are executable and don't require the use of any third-party utilities for updating.
For other types of files, a prerequisite for a successful update of the device is the use of the FlashTool utility.
?
In the future, we will prepare and publish photo and video instructions for firmware updates for each model RigExpert analyzers and interfaces.
?
Yours faithfully,
RigExpert Crew |
|
Re: Meet the AntScope Application for iOS!
#antscopeforios
Hello.
?
AA-55 Zoom Option Bluetooth analyzer is currently not supported.
iOS has some features with the work of the Bluetooth classic which is used in the AA-55 Zoom OB. |
|
Meet the AntScope Application for iOS!
#antscopeforios
Dear friends!,
We are pleased to inform you that the popular AntScope Application gained a support for iOS too!
RigExpert AA-230 ZOOM Option BLE and RigExpert Stick 230 devices can be connected to AntScope Application for iOS.
Download and install application onto your smartphone & tablet to:
? operate the analyzer remotely via Bluetooth
? galvanically isolate the analyzer from the computer or undesirable grounding
? see the characteristics of your antenna in more detail
? share measurement results through social networks
Use this link to download AntScope Application for iOS from App Store:
We will sincerely appreciate your feedback. Thanks to you, we make our devices and software better.
We are confident that you will enjoy new opportunities of your lovely antenna analyzer.
Sincerely yours,
RigExpert Crew
|
|
We moved!
#rigexpert
Dear friends!
Today, April 14, on this beautiful spring day, our group was created.
?
Earlier, for more than 5 years, we supported our conference in the Yahoo group. But following the development of progress, it was decided to create a new group here.
?
We ask you to follow a few simple rules so that we all feel warm and comfortable here.
?
Your sincerely, RigExpert Crew. |
Alex RigExpert
Rick Williams - VE7TK
Kerry NH2A
z_ kevino
1121 - 1140 of 1140