开云体育

Hi all, Is PiGate v2.2 compatible with current Pi 4 hardware? I read a posting from Mark that earlier version of Pi 4 were working, but a more recent Pi 4 did not. That was at the beginning of 2021. However, he did not specify the version that did not work and I could not find any information that a new build had been made to fix the problem. We have some folks in our ARES - ACS group interested in building a few PiGates but are shy to buy the Pi until we know more and can get v2.2 working. Thank you, Asa Jay W7TSC - Spokane County ARES - ACS Emergency Coordinator Sent via radio waves

I have a copy of PiGate v2.2 zip that I downloaded a while back. I just yesterday attempted to install and configure. v2.2 boots on my Pi 3 just fine and I am able to get to the desktop login via a connected monitor, or the admin login via wi-fi and browser. However, I am unable to actually login to either interface. One uses the pi username but the usual pi password will not work. The usual default admin password doesn’t either. To understand better, all I have is the v1.5 documentation, unfortunately. My guess is the default passwords were changed prior to or with v2.2. I realize Mark is not currently hosting any downloads and is recovering from other surgery. Therefore I am reaching out here after hours of searching the forum. Is there someone who can supply the default passwords for v2.2 or supply the docs and other artifacts for v2.2? Thank you, Asa Jay W7TSC - Spokane County ARES - ACS Emergency Coordinator

I can NOT get this to install on Arch. I need Python3 and PiP installed, then I can install this package. Can anyone figure it out? Any help would be greatly appreciated. Also, how can I run Makepgk as "nobody"? https://www.the-diy-life.com/add-an-oled-stats-display-to-raspberry-pi-os-bullseye/ https://www.linuxshelltips.com/install-python-arch-linux/ https://arch.pkgs.info/guide/a-complete-tutorial-on-python-adafruit-circuitpython-ssd1306-installation-on-arch-based-linux-manjaro-anarchy

Hello, Does anyone know of a repository or do you have a binary for any Mumble 1.4.x client version that will run on Buster? Trying to help out a buddy who can't compile from source. Very much appreciated. 73, Gerry W1VE

Forrest

Hey RaspberryPi 4 Ham Radio Group, So I have been working on a project for some time now and I finally feel that it's ready for some other folks to take a look at it and test it out. If you're into using raspberry pi computers for ham radio I have created a repository of scripts/playbooks to setup, compile and maintain/update radio tools on the pi. I finally released a version 1.0.0 at https://github.com/k2exe/k2exe-rpi-config There is some basic documentation in the README file stars and issues appreciated if you find anything. I have been testing on the latest raspberry pi OS and often use VNC to power my pis connected to radios in the shack. This isn't focused on portable operating out of the box but I do have scripts for setting up things like GPS time sync and real time clock modules. You may ask why you would use this over build a pi or other tools. The primary reason I created these was because Ansible(configuration management tool I'm using) is better at maintaining state than bash scripts and preventing redundant work during setup or updates. Thanks for any feedback and I hope someone finds it useful! 73, DE K2EXE Mark -- Join my ham radio discord server and follow me on Twitter @K2EXE

My goof....last two messages were to be send directlt yo Mark...not to the group. Jerry

Maybe some good news! See attached article: https://arstechnica.com/gadgets/2023/05/raspberry-pi-ceo-supply-should-be-unconstrained-in-second-half-of-2023/

What is the most proper way to install Python in a fresh Bullseye OS, lite version OS? I believe it's easy, but this time I want to make sure I'm doing it properly. Thanks, Arnold KQ6DI

Ok I need help. Im new to the PI and I bought a new pi 3b. I can put the android system on there but for some reason the wifi thats built in does not work. I installed android and got that running but the wifi just turns on then off. Ethernet connection works great but I cant use it as it has to be wireless. Its going to run the app for my cameras that are all hooked to a DVR that has constant ethernet internet. Im trying to get the cameras on a monitor in another room. The only issue I have is the wireless wont work and I know that has been an issue as so far I have read on the internet. I can put an android OS on it or the Raspberry PI OS with the desktop with no issues. Just cant get the damn wireless to work. Is there a wireless dongle that I can use and if so, which one and how do I put the drivers in for that. Please help guys..I want to learn but nothing is working. You can PM me of tag me in responses...Ill even pay for it.

Has anyone run across this error when installing WSPR? /usr/bin/ld: mailbox.o: in function `mbox_open': mailbox.c:(.text+0xc54): undefined reference to `makedev' /usr/bin/ld: mailbox.c:(.text+0xcbc): undefined reference to `makedev' collect2: error: ld returned 1 exit status make: *** [makefile:22: wspr] Error 1

CatRotator is the new sofware to control antenna rotators. Main features: - more than one rotator at the same time; - communicate with other softwares using UDP protocol; - open source, multi-platform (available also for Raspberry Pi OS), free. The new version 1.2.0 of CatRotator is now available for download https://www.pianetaradio.it/blog/catrotator/ Change log: + plus / minus buttons to increment / decrement position + manage rotators with overlap + WSJT-X moon tracking + AirScout airplane tracking

Good evening, I installed tqsl from source following the instructions from arrl. After installing all prerequisites, the cmake process went smoothly. However, the program won't launch. /home/pi/Downloads/tqsl-2.6.5/apps/TQSL just spins and stops. Am I missing something? Please help, Jay WB2QQJ

Hello, has anyone tried to boot HamPi from a hard drive on a usb port? I don't arrive to make it on a Rpi 4b. Can you help me ? Francis F6DED

The Pi in my RFLKIT amplifier will connect with a vnc viewer client, but drops after 10 ? minutes ... where should I look ??? I replaced the SD card with a different backup image, now VNC stays connected. ???? tnx bill

Hi friends, fellow hams, and HamPi / HamPC / HamIQ? users... I'm sorry the December release of HamPi is a day late... During testing, I discovered several issues that needed correcting prior to release. I am pleased to announce that HamPi 3.3 (32-bit), the comprehensive award-winning ham radio software distribution for the Raspberry Pi is now available for public download! There have been over 95,000 downloads of HamPi to date across the world. On March 1, 2022, SourceForge awarded HamPi the Community Choice and SourceForge Favorite awards. Additionally, in late August, 2022, SourceForge awarded HamPi the prestigious Community Leader award. Direct Download Link: http://hampi.sourceforge.net/ NOTE: This is the 32-bit version. The 64-bit version will be released in the next few days/weeks. All things HamPi / HamPC related: https://linktr.ee/HAMPIW3DJS If you run into issues, please post to the forum on /g/Ham-Pi/ first. If you see a bug (defect), please report it on the GitHub issues page at: https://github.com/dslotter/HamPi/issues Did you know that HamPi has a wiki? Find it at https://github.com/dslotter/HamPi/wiki UPGRADING: In order to transition smoothly from HamPi 1.X to HamPi 3.3 and preserve your configuration settings, please follow the instructions in the file found in the download area, "UPGRADING_FROM_PRIOR_VERSION.TXT" (This is still a work in progress.) CHANGELOG: Version 3.3 (March 2022) Release =================================== - Note: HamPi no longer fits on 16GB card Use 32GB card or larger - Updated copyright year to 2023 - Switched license to GPL 3.0. - Added aa-analyzer script - Added Fl_MoxGen analyzer - Added OWX (Open Wouxun) package - Added Wordsworth (CW trainer) - Added ADIF Multitool - Added xwefax (weather) - Update D-Rats to 0.4.0 - Broken packages (not installed this version): * JS8Call (bitrot) * TRlog * Hlog * SDRAngel Good luck and 73! -- -- Dave, W3DJS Technical Specialist, GA Section of ARRL -- -- AEC, Georgia/Gwinnett County ARES Lifetime Member: ARRL/QRZ/eHam/GARS/ARC -- -- Curator of HamPi, the ham radio software distribution for the Raspberry Pi --

Your Knowledge is Valuable! All of us want to learn, solve problems and share information. GA DIGITAL NET is your opportunity to listen and learn and/or share your valuable know-how! We begin every Wednesday at 8:00 pm Eastern on Talk Group 3113, Brandmeister & K4USD Networks. Please use NETQSO.COM to log in and list your interest or problem to be solved or simply tell us during check in. If you just want to listen that's fine too. All are welcomed to participate in GA DIGITAL NET during our friendly and informative session.

Hi, I can?t get the aprs ringer working. Only the pop ups seems to work. Already double checked the menus and aprs handbook. Did somebody actually ever heard a ringing while receiving a aprs packet (I did not find any yt videos hearing the ringer...)? Any hints would be very appreciated. vy 73, Harry - DH1NBE

I am looking for recommendations for a reasonably priced weather station that links to the Pi and can then feed the data to the APRS Beacon running on the same Pi. Thank you in advance. Ed, KD9FRQ