¿ªÔÆÌåÓý

  1. RaspberryPi-4-HamRadio
  2. Topics

TNC-X setup #hardware #tnc

 

I pulled out a couple of old ChipWorks TNC-X's and would like to set both of them on my Pi3. The lights blink off an on when powered up, but I would like to do a fresh install to get them running. There are a number of different sets of instructions on the internet, and I have not be able to get any to work. I would like to hear from someone that has theirs working that can point me to a file with the instructions.

Thanks

Bob NZ2Z
 

¿ªÔÆÌåÓý


Hello Bob,

Which guides have you tried and at what step did you get stuck?? We can try helping you solve a specific issue if you give us one.? As an alternative, I have my guide at which is a cookbook style doc which should get packet working.? If you have questions and/or problems, ask away.

--David
KI6ZHD


On 10/15/2022 10:57 PM, Bob Bennett via groups.io wrote:

I pulled out a couple of old ChipWorks TNC-X's and would like to set both of them on my Pi3. The lights blink off an on when powered up, but I would like to do a fresh install to get them running. There are a number of different sets of instructions on the internet, and I have not be able to get any to work. I would like to hear from someone that has theirs working that can point me to a file with the instructions.

Thanks

Bob NZ2Z

1 - 2 of 2