开云体育

RPI Rev 2 Board

Jerome K #109 I see they have anounced the Rev 2 board.. Not a big change but a few small ones.. Reasd all about it..
vbifyz All Messages By This Member #111 Making I2S interface easily available is a big change for the ham radio applications. Now audio codec chips can be connected directly to RPi. 73, Mike toggle quoted message Show quoted text --- In Raspberry_Pi_4-Ham_RADIO@..., "Jerome K" <JKutche@...> wrote: I see they have anounced the Rev 2 board.. Not a big change but a few small ones.. Reasd all about it..
Perry Chamberlain #112 Adafruits linux disro for the pi has this blurb about their version of wheezy. "Our distro is based on "Wheezy" but?comes with hardware?SPI,?I2C,?one wire, and?WiFi?support for our wifi adapters. It also has some things to make overall hacking easier such?sshd?on startup (with key generation on first boot) and??Bonjour (so you can simply?ssh raspberrypi.local?from any computer on the local network)" Ke6anm toggle quoted message Show quoted text On Sep 11, 2012, at 1:07 PM, "vbifyz" <3ym3ym@...> wrote: ? Making I2S interface easily available is a big change for the ham radio applications. Now audio codec chips can be connected directly to RPi. 73, Mike --- In Raspberry_Pi_4-Ham_RADIO@..., "Jerome K" wrote: > > > > I see they have anounced the Rev 2 board.. > Not a big change but a few small ones.. > Reasd all about it.. >
Ian Wade G3NRW #114 ___Original Message_________________________________________ From: Jerome K <JKutche@...> Date: Tue, 11 Sep 2012 Time: 18:35:47 I see they have anounced the Rev 2 board.. Looking at the picture, how does one tell it is a Rev 2 board? Is it marked as such on the other side? -- 73 Ian, G3NRW The TS-590S Resources Page: The TS-990S Resources Page:
John G8BPQ All Messages By This Member #115 开云体育 Ian, ? It has two mounting holes (the original has none), and is marked “Made in UK”. ? 73, John ? From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...] On Behalf Of Ian Wade G3NRW Sent: 12 September 2012 08:53 To: Raspberry_Pi_4-Ham_RADIO@... Subject: Re: [Raspberry_Pi_4-Ham_RADIO] RPI Rev 2 Board ? ? ___Original Message_________________________________________ From: Jerome K <JKutche@...> Date: Tue, 11 Sep 2012 Time: 18:35:47 > >I see they have anounced the Rev 2 board.. > Looking at the picture, how does one tell it is a Rev 2 board? Is it marked as such on the other side? -- 73 Ian, G3NRW The TS-590S Resources Page: The TS-990S Resources Page: > > > > >
Kutche, Jerry (Mitchell) USA #116 开云体育 They also removed the fuses for the USB port and If emmory serves from what I read it has been reconfigured so you can plug more into it.. But read up at the raspberry pi site it tells whats new.. ? I personally may wait for a rev 3 board since I have so many already and those minor changes does not affect what I am planning here... 73 ? Jerry Kutche Electrical Supervisor ? Lehigh Cement Company LLC 180 N. Meridian Road Mitchell, IN? 47446 Phone:? (812) 849-2191 ext. 251 Fax:? (812) 849-5007 Cell: (812) 583-0445 jkutche@... www.lehighcement.com This e-mail may contain confidential and/or legally privileged information.? If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and delete this e-mail.? Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. ? From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...] On Behalf Of John Wiseman Sent: Wednesday, September 12, 2012 4:31 AM To: Raspberry_Pi_4-Ham_RADIO@... Subject: RE: [Raspberry_Pi_4-Ham_RADIO] RPI Rev 2 Board ? Ian, It has two mounting holes (the original has none), and is marked “Made in UK”. 73, John From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...] On Behalf Of Ian Wade G3NRW Sent: 12 September 2012 08:53 To: Raspberry_Pi_4-Ham_RADIO@... Subject: Re: [Raspberry_Pi_4-Ham_RADIO] RPI Rev 2 Board ? ___Original Message_________________________________________ From: Jerome K <JKutche@...> Date: Tue, 11 Sep 2012 Time: 18:35:47 > >I see they have anounced the Rev 2 board.. > Looking at the picture, how does one tell it is a Rev 2 board? Is it marked as such on the other side? -- 73 Ian, G3NRW The TS-590S Resources Page: The TS-990S Resources Page: > > > > >

Previous Topic Next Topic