开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. RaspberryPi-4-HamRadio
  2. Topics

Raspberry Pi 4 and Hamvoip

 

Thank you for the reply. I am using a USB 3.0 M.2 NVME adapter. It plugs into the USB port on the Pi4. It will not boot. It see's the USB drive but, will not start the boot process. I can take a screen shot later and post the errors
I am getting. I have the Pi4 set to USB boot first, and flash card second (no flash card installed). Still nothing. Do I have to flash the EEPROM to get this to work? Thanks.
 

开云体育


Which NVME to USB hat board are you using with your Raspberry Pi 4??

--David
KI6ZHD


On 10/23/2024 03:40 PM, W2LPC wrote:

Hello all. Does anyone have any experience in getting Hamvoip to boot and run on a Raspberry Pi 4 with an M.2 SSD? I really want to get rid of the memory card(s) in my systems and can't figure out how to get this thing to boot correctly. ANY help would be appreciated. 73' de W2LPC, Lou.
 

Burn the image to the SSD with Raspberry pi imager, then plug the drive into the pi and power it on.? Should boot up just fine

Get
On Oct 23, 2024, at 15:40, "W2LPC via " <outlook.com@groups.io target=_blank>[email protected]> wrote:

Hello all. Does anyone have any experience in getting Hamvoip to boot and run on a Raspberry Pi 4 with an M.2 SSD? I really want to get rid of the memory card(s) in my systems and can't figure out how to get this thing to boot correctly. ANY help would be appreciated. 73' de W2LPC, Lou.
W2LPC@...
 

Hello all. Does anyone have any experience in getting Hamvoip to boot and run on a Raspberry Pi 4 with an M.2 SSD? I really want to get rid of the memory card(s) in my systems and can't figure out how to get this thing to boot correctly. ANY help would be appreciated. 73' de W2LPC, Lou.
W2LPC@...

21 - 24 of 24