Keyboard Shortcuts
Likes
Search
Qsstv with IC 7300
|
I am not sure it’s stable with new hamlib?code last time I had rig control working I had started with older hamlib had to compile up?
toggle quoted message
Show quoted text
Vox works? If you notice it won’t say “no rig I/o” on the splash screen?but it is connecting just won’t do much more. (My experience anyway with a new compile)? Excuse typos and brevity, sent from a mobile device. On Monday, July 12, 2021, 2:09 AM, Eli Rozenberg <4x4fdil@...> wrote:
|
|
the pi4 usb3 is faulty
toggle quoted message
Show quoted text
Not the radios issue it’s the pi defect? Excuse typos and brevity, sent from a mobile device. On Monday, July 12, 2021, 7:44 AM, Jim Darrough <jim@...> wrote:
|
|
Not faulty, just not 100% backwards compatible with USB2.0
On Jul 12, 2021, at 09:16, "Kelly Keeton via " <yahoo.com@groups.io target=_blank>[email protected]> wrote: the pi4 usb3 is faulty |
|
Interesting, so all the?usb3 SSD issues and issues with usb3 high speed bus like using a coral are related to usb2 compatibility issues? Got any data to back it up? Or this is just the Texas chip in intel radios? Anywhoo im trolling so I will leave it at that.?
toggle quoted message
Show quoted text
Excuse typos and brevity, sent from a mobile device. On Monday, July 12, 2021, 9:44 AM, N5XMT <dacooley@...> wrote:
|
|
the fact that it does not work with some USB2.0 devices is the backwards?compatibility issue. The USB3.0 booting issue is the Pi's firmware (not the USB3.0, but the BOOT firmware) does not support boot mode in some USB to SATA chips.? Chips the manufacturers won't release the source code of their drivers so the Pi foundation can compile them into ARM architecture.? Yes, you are trolling, and that isn't allowed here.? If you want to troll, take it to facebook where everyone else is doing it. On Mon, Jul 12, 2021 at 9:56 AM Kelly Keeton via <kellykeeton=[email protected]> wrote:
|
开云体育I am using usb 2 and not 3. I have tried every thing and no lock. I most say that when I used Qsstv ver 2 the rig was connected and I saw the freq on Qsstv. The moment I upgraded to ver 9.4.4 and 9.5.3 I have lost connection ? ? From: [email protected] <[email protected]> On Behalf Of N5XMT
Sent: Monday, July 12, 2021 7:44 PM To: [email protected] Subject: Re: [RaspberryPi-4-HamRadio] Qsstv with IC 7300 ? Not faulty, just not 100% backwards compatible with USB2.0 On Jul 12, 2021, at 09:16, "Kelly Keeton via " <yahoo.com@groups.io target=_blank>[email protected]> wrote:
|
开云体育When you connect to your IC7300 to your Raspberry Pi, do you: ? - See it's USB ports via the Linux command: lsusb ? - Do you have the right user/group permissions on the resulting serial ports per:? ls -la /dev | grep ttyUSB ? - Are you running a version of Hamlib that supports the IC7300? ? - Can you control the radio via hamlib's rigctl program? ? - do you see the correct sound devices per: aplay -l?? and?? arecord -l --David KI6ZHD On 07/12/2021 12:35 PM, Eli Rozenberg
wrote:
|