开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. RaspberryPi-4-HamRadio
  2. Topics

Pi5 12v supply

 

Anyone find a good 5a supply to properly power the pi5 with yet??


kelly
 

Raspberry Pi supply one.

On 27/01/2024 00:23 GMT Kelly K7MHI via groups.io <kellykeeton@...> wrote:


Anyone find a good 5a supply to properly power the pi5 with yet?
 

12v?




Sent while portable! please excuse typos.

On 27 Jan 2024, at 00:48, Nigel Gunn, G8IFF/W8IFF <nigel@...> wrote:

?Raspberry Pi supply one.

On 27/01/2024 00:23 GMT Kelly K7MHI via groups.io <kellykeeton@...> wrote:


Anyone find a good 5a supply to properly power the pi5 with yet?
 

Yea 12v source supply outputting the proper 5a USBC PD?
 

开云体育

Apologies,?
? ? ? ? ? ? ? ? ? ?I’m just picking up on this.


De Spence M0STO


Sent while portable! please excuse typos.

On 27 Jan 2024, at 02:11, Kelly K7MHI via groups.io <kellykeeton@...> wrote:

?Yea 12v source supply outputting the proper 5a USBC PD?

 

From PiSupply.us


On Fri, Jan 26, 2024, 18:17 Terry Philbin <tphilbin52@...> wrote:
Mine (Pi 5 8g)is being shipped from as we speak.
It is coming with a 27 watt 5v power supply.

On Fri, Jan 26, 2024, 18:11 Kelly K7MHI via <kellykeeton=[email protected]> wrote:
Yea 12v source supply outputting the proper 5a USBC PD?

 

Mine (Pi 5 8g)is being shipped from as we speak.
It is coming with a 27 watt 5v power supply.

On Fri, Jan 26, 2024, 18:11 Kelly K7MHI via <kellykeeton=[email protected]> wrote:
Yea 12v source supply outputting the proper 5a USBC PD?

 

The new pi 5 27W power supply.?

Get
On Jan 26, 2024, at 16:23, "Kelly K7MHI via " <yahoo.com@groups.io target=_blank>[email protected]> wrote:

Anyone find a good 5a supply to properly power the pi5 with yet??


kelly
 

I see a bunch which are proper for AC mains?

don’t see any for 12v DC power source …
 




On 27/01/2024 04:53 GMT Kelly K7MHI via groups.io <kellykeeton@...> wrote:


I see a bunch which are proper for AC mains?

don’t see any for 12v DC power source …
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@... www

 

Ideally it’s a HAT direct or via USB C?Nigel
 

That's significantly moved the goalposts.

On 27/01/2024 07:50 GMT Kelly K7MHI via groups.io <kellykeeton@...> wrote:


Ideally it’s a HAT direct or via USB C?Nigel
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@... www

 

开云体育

Is it really that difficult to understand what he is asking for???

He want to be able to run his Pi 5 (5VDC) from 12VDC, such as in a vehicle.

Mick - W7CAT

----- Original Message -----
From: "Edward Seeliger"
To: [email protected]
Sent: Saturday, January 27, 2024 10:45:35 AM
Subject: Re: [RaspberryPi-4-HamRadio] Pi5 12v supply

> Meanwell Power supplies come in 5V and 12V at multiple amps / watts output.
> They are small / compact power supplies.
> USB C cables can be obtained with bare wire on one end to put spade connectors onto to attach to these Power Supplies.
> You can power multiple RPI5s (or other devices) without problems.
> Edd - KD5M >
--

 

开云体育

and

—
73 de K3FZT/Steve
--
Steve Davidson K3FZT
Winlink Gateway K3FZT-10@...?direct or via W3EOC-3
Supporting VARA FM Wide/1200bd Packet
1200bd Packet Node/BBS K3FZT-7@... mHz?
WIRES-X Room #85218 “MARC-DARBY” 444.050 mHz
K3FZT@... FN20ja

On Jan 27, 2024, at 13:14, Teton Amateur Radio Repeater Association (TARRA) <tarra@...> wrote:

?

Is it really that difficult to understand what he is asking for???

He want to be able to run his Pi 5 (5VDC) from 12VDC, such as in a vehicle.

Mick - W7CAT

----- Original Message -----
From: "Edward Seeliger"
To: [email protected]
Sent: Saturday, January 27, 2024 10:45:35 AM
Subject: Re: [RaspberryPi-4-HamRadio] Pi5 12v supply

> Meanwell Power supplies come in 5V and 12V at multiple amps / watts output.
> They are small / compact power supplies.
> USB C cables can be obtained with bare wire on one end to put spade connectors onto to attach to these Power Supplies.
> You can power multiple RPI5s (or other devices) without problems.
> Edd - KD5M >
--

 

Steve The pi5 needs PD USBC?

Are you injecting to the rail on a pi5 today woth success?

Im currently using the top HAT pins and the PoE standards haven’t been published yet?

please detail you seem to have suggested the same as Nigel ?

kelly?

 

No Mick. He's now saying USB-C or a HAT. He's moved the goalposts.



Is it really that difficult to understand what he is asking for???

He want to be able to run his Pi 5 (5VDC) from 12VDC, such as in a vehicle.

Mick - W7CAT

 

I don’t own an RPi5.
I assumed 5VDC at 5A was sufficient.
I had not seen any mention of PD until Kelly’s post at 1407; must have missed that previously.
I’ll shut-up and go away now.

73 de K3FZT/Steve
--
Steve Davidson K3FZT
Winlink Gateway K3FZT-10@... direct or via W3EOC-3
Supporting VARA FM Wide/1200bd Packet
1200bd Packet Node/BBS K3FZT-7@... mHz
WIRES-X Room #85218 “MARC-DARBY” 444.050 mHz
K3FZT@... FN20ja

On Jan 27, 2024, at 14:18, Nigel Gunn, G8IFF/W8IFF <nigel@...> wrote:
?No Mick. He's now saying USB-C or a HAT. He's moved the goalposts.



Is it really that difficult to understand what he is asking for???

He want to be able to run his Pi 5 (5VDC) from 12VDC, such as in a vehicle.

Mick - W7CAT

Michael
 

Look on ebay for a "buck converter."
12 volt to 5 volts. I run my raspberry in my rv.

On Sat, Jan 27, 2024, 13:14 Teton Amateur Radio Repeater Association (TARRA) <tarra@...> wrote:

Is it really that difficult to understand what he is asking for???

He want to be able to run his Pi 5 (5VDC) from 12VDC, such as in a vehicle.

Mick - W7CAT

----- Original Message -----
From: "Edward Seeliger"
To: [email protected]
Sent: Saturday, January 27, 2024 10:45:35 AM
Subject: Re: [RaspberryPi-4-HamRadio] Pi5 12v supply

> Meanwell Power supplies come in 5V and 12V at multiple amps / watts output.
> They are small / compact power supplies.
> USB C cables can be obtained with bare wire on one end to put spade connectors onto to attach to these Power Supplies.
> You can power multiple RPI5s (or other devices) without problems.
> Edd - KD5M >
--

 

开云体育

Then he needs a buck converter.
There are a ton of Amazon.? Inexpensive, handle the current needed etc

Get
On Jan 27, 2024, at 10:14, "Teton Amateur Radio Repeater Association (TARRA)" <tarra@...> wrote:

Is it really that difficult to understand what he is asking for???

He want to be able to run his Pi 5 (5VDC) from 12VDC, such as in a vehicle.

Mick - W7CAT

----- Original Message -----
From: "Edward Seeliger"
To: [email protected]
Sent: Saturday, January 27, 2024 10:45:35 AM
Subject: Re: [RaspberryPi-4-HamRadio] Pi5 12v supply

> Meanwell Power supplies come in 5V and 12V at multiple amps / watts output.
> They are small / compact power supplies.
> USB C cables can be obtained with bare wire on one end to put spade connectors onto to attach to these Power Supplies.
> You can power multiple RPI5s (or other devices) without problems.
> Edd - KD5M >
--

 

POE standards aren't set by the pi foundation. It is an international standard for POE.? The only thing specific to the pi is pin location, and that was published before the Pi5 ever reached the market.
I'm currently running the Waveshare POE hat for the Pi5 which comes with it's own heatsink.? As far as feeding 5v to the GPIO header, it has worked for every version of the pi.? 5V @5 amps for the Pi5
That is how the POE hat powers the pi.?

Get
On Jan 27, 2024, at 11:07, "Kelly K7MHI via " <yahoo.com@groups.io target=_blank>[email protected]> wrote:

Steve The pi5 needs PD USBC?

Are you injecting to the rail on a pi5 today woth success?

Im currently using the top HAT pins and the PoE standards haven’t been published yet?

please detail you seem to have suggested the same as Nigel ?

kelly?

1 - 20 of 45