开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. RaspberryPi-4-HamRadio
  2. Topics

Part of desktop missing.

 

Good morning all, I have the Pi 3 Model B using Raspbian version Bullseye. I have included a picture of the screen issue I am having and not sure how to fix it.
Mike

piscreen.jpg

 

You can adjust it in the Pi setup utility or one of the ini files.

On 13/04/2024 14:01 GMT Mike Weir <ve9kk@...> wrote:


Good morning all, I have the Pi 3 Model B using Raspbian version Bullseye. I have included a picture of the screen issue I am having and not sure how to fix it.
Mike
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@... www

M. J. Synowiec
 

Mike,??

Have you tried your monitors horizontal centering?? It's usually a small switch on the right or left of the enclosures bottom.

Mike K8SYN

On Saturday, April 13, 2024 at 02:57:18 PM EDT, Mike Weir <ve9kk@...> wrote:


Good morning all, I have the Pi 3 Model B using Raspbian version Bullseye. I have included a picture of the screen issue I am having and not sure how to fix it.
Mike

 

Good morning all, thanks for all the comments I decided to format the SD card and re-install Bullseye again after playing around forever. All is well now and the OS also runs a lot faster now. Screen back to normal but not sure what I did but I do know "if it is not broke then don't fix it" will apply to further stepping into settings and tweaking.
73,
Mike
VE9KK

1 - 4 of 4