¿ªÔÆÌåÓý

  1. RaspberryPi-4-HamRadio
  2. Topics

TNC-96K PITNCParamsApr18.zip

 

I just got a TNC-96K and flashed it.

I am trying to run the makeit so that I can run it from my raspberry pi.

However this is the error that I keep getting.

pitnc_getparams.c: In function ¡®main¡¯:
pitnc_getparams.c:201:13: warning: implicit declaration of function ¡®ioctl¡¯ [-Wimplicit-function-declaration]
? 201 |? ? retval = ioctl(fd,? I2C_SLAVE, address);
? ? ? |? ? ? ? ? ? ?^~~~~
pitnc_getparams.c:239:3: warning: implicit declaration of function ¡®i2c_smbus_write_byte¡¯ [-Wimplicit-function-declaration]
? 239 |? ?i2c_smbus_write_byte(fd, FEND);
? ? ? |? ?^~~~~~~~~~~~~~~~~~~~
pitnc_getparams.c:271:13: warning: implicit declaration of function ¡®i2c_smbus_read_byte¡¯ [-Wimplicit-function-declaration]
? 271 |? ? retval = i2c_smbus_read_byte(fd);
? ? ? |? ? ? ? ? ? ?^~~~~~~~~~~~~~~~~~~
pitnc_getparams.c: In function ¡®OpenCOMPort¡¯:
pitnc_getparams.c:668:12: error: ¡®FIONBIO¡¯ undeclared (first use in this function)
? 668 |? ioctl(fd, FIONBIO, &param);
? ? ? |? ? ? ? ? ? ^~~~~~~
pitnc_getparams.c:668:12: note: each undeclared identifier is reported only once for each function it appears in
pitnc_setparams.c: In function ¡®main¡¯:
pitnc_setparams.c:239:12: warning: implicit declaration of function ¡®ioctl¡¯ [-Wimplicit-function-declaration]
? 239 |? ?retval = ioctl(fd,? I2C_SLAVE, address);
? ? ? |? ? ? ? ? ? ^~~~~
pitnc_setparams.c:279:3: warning: implicit declaration of function ¡®i2c_smbus_write_byte¡¯ [-Wimplicit-function-declaration]
? 279 |? ?i2c_smbus_write_byte(fd, FEND);
? ? ? |? ?^~~~~~~~~~~~~~~~~~~~
pitnc_setparams.c:336:13: warning: implicit declaration of function ¡®i2c_smbus_read_byte¡¯ [-Wimplicit-function-declaration]
? 336 |? ? retval = i2c_smbus_read_byte(fd);
? ? ? |? ? ? ? ? ? ?^~~~~~~~~~~~~~~~~~~
pitnc_setparams.c: In function ¡®OpenCOMPort¡¯:
pitnc_setparams.c:706:12: error: ¡®FIONBIO¡¯ undeclared (first use in this function)
? 706 |? ioctl(fd, FIONBIO, &param);
? ? ? |? ? ? ? ? ? ^~~~~~~
pitnc_setparams.c:706:12: note: each undeclared identifier is reported only once for each function it appears in
pitnc_flash.c: In function ¡®WaitForResponse¡¯:
pitnc_flash.c:141:17: warning: implicit declaration of function ¡®i2c_smbus_read_byte¡¯ [-Wimplicit-function-declaration]
? 141 |? ? RXBlock[n] = i2c_smbus_read_byte(fd);
? ? ? |? ? ? ? ? ? ? ? ?^~~~~~~~~~~~~~~~~~~
pitnc_flash.c: In function ¡®main¡¯:
pitnc_flash.c:392:3: warning: implicit declaration of function ¡®i2c_smbus_write_byte¡¯ [-Wimplicit-function-declaration]
? 392 |? ?i2c_smbus_write_byte(fd, FEND);
? ? ? |? ?^~~~~~~~~~~~~~~~~~~~
/usr/bin/ld: /tmp/cc3KeZD7.o: in function `WaitForResponse':
pitnc_flash.c:(.text+0x9c): undefined reference to `i2c_smbus_read_byte'
/usr/bin/ld: /tmp/cc3KeZD7.o: in function `main':
pitnc_flash.c:(.text+0xa20): undefined reference to `i2c_smbus_write_byte'
/usr/bin/ld: pitnc_flash.c:(.text+0xa34): undefined reference to `i2c_smbus_write_byte'
/usr/bin/ld: pitnc_flash.c:(.text+0xa48): undefined reference to `i2c_smbus_write_byte'
collect2: error: ld returned 1 exit status

I am running the latest raspberry pi os lite 2022-04-04. I tried with 32 bit and 64 bit. Same error.

Anybody else have this problem?

Regards,

Chris Andrist, KC7WSU
 

¿ªÔÆÌåÓý


Hello Chris,

The TNCPi 9k6 hardware a little bit of a fringe area here on this Raspberry Pi list but I do know that John Wiseman G8BPQ who maintains the 9k6 firmware and some of these utilities *is* a member of this list.? Maybe he will chime in.? Anyway, here are my thoughts:


?? - Have you viewed the TNC Pi (k6 resources here??? ?? I don't see any email support lists there other than the very obsolete Yahoo one.? I don't know if there is a newer replacement email list

?? - I see you're trying to compile the TNCPi I2C tools.? Is there a reason why you are compiling vs. using pre-built binaries?? Where did you download the sources from?? The true home to these tools is here:?

?? - What version did you download??

?? - In , there are pre-built versions that should work for your Raspberry Pi


Anyway, I was able to reproduce your error and it seems that in each of the .c files, there is the following line that is commented out for some reason:

?? //#include <sys/ioctl.h>
?? //#include <linux/i2c-dev.h>

Remove the "//" in the front of that line in each file.? Next, it seems that it's now required to ADD the following include line say after the i2c-dev.h line:

?? #include <i2c/smbus.h>


Next, make sure you have the required I2C libraries and tools installed:

?? sudo apt install libi2c-dev libi2c0 i2c-tools


Now doing all that, it should build but on my Linux machine, I'm still seeing "i2c_smbus_write_byte" compile errors.? If you search around on the internet with the term:

?? linux undefined reference to "i2c_smbus_write_byte"

there are lots of hits but few conclusive answers.

--David








On 04/19/2022 08:49 AM, Chris Andrist wrote:

I just got a TNC-96K and flashed it.

I am trying to run the makeit so that I can run it from my raspberry pi.

However this is the error that I keep getting.

pitnc_getparams.c: In function ¡®main¡¯:
pitnc_getparams.c:201:13: warning: implicit declaration of function ¡®ioctl¡¯ [-Wimplicit-function-declaration]
? 201 |? ? retval = ioctl(fd,? I2C_SLAVE, address);
? ? ? |? ? ? ? ? ? ?^~~~~
pitnc_getparams.c:239:3: warning: implicit declaration of function ¡®i2c_smbus_write_byte¡¯ [-Wimplicit-function-declaration]
? 239 |? ?i2c_smbus_write_byte(fd, FEND);
? ? ? |? ?^~~~~~~~~~~~~~~~~~~~
pitnc_getparams.c:271:13: warning: implicit declaration of function ¡®i2c_smbus_read_byte¡¯ [-Wimplicit-function-declaration]
? 271 |? ? retval = i2c_smbus_read_byte(fd);
? ? ? |? ? ? ? ? ? ?^~~~~~~~~~~~~~~~~~~
pitnc_getparams.c: In function ¡®OpenCOMPort¡¯:
pitnc_getparams.c:668:12: error: ¡®FIONBIO¡¯ undeclared (first use in this function)
? 668 |? ioctl(fd, FIONBIO, &param);
? ? ? |? ? ? ? ? ? ^~~~~~~
pitnc_getparams.c:668:12: note: each undeclared identifier is reported only once for each function it appears in
pitnc_setparams.c: In function ¡®main¡¯:
pitnc_setparams.c:239:12: warning: implicit declaration of function ¡®ioctl¡¯ [-Wimplicit-function-declaration]
? 239 |? ?retval = ioctl(fd,? I2C_SLAVE, address);
? ? ? |? ? ? ? ? ? ^~~~~
pitnc_setparams.c:279:3: warning: implicit declaration of function ¡®i2c_smbus_write_byte¡¯ [-Wimplicit-function-declaration]
? 279 |? ?i2c_smbus_write_byte(fd, FEND);
? ? ? |? ?^~~~~~~~~~~~~~~~~~~~
pitnc_setparams.c:336:13: warning: implicit declaration of function ¡®i2c_smbus_read_byte¡¯ [-Wimplicit-function-declaration]
? 336 |? ? retval = i2c_smbus_read_byte(fd);
? ? ? |? ? ? ? ? ? ?^~~~~~~~~~~~~~~~~~~
pitnc_setparams.c: In function ¡®OpenCOMPort¡¯:
pitnc_setparams.c:706:12: error: ¡®FIONBIO¡¯ undeclared (first use in this function)
? 706 |? ioctl(fd, FIONBIO, &param);
? ? ? |? ? ? ? ? ? ^~~~~~~
pitnc_setparams.c:706:12: note: each undeclared identifier is reported only once for each function it appears in
pitnc_flash.c: In function ¡®WaitForResponse¡¯:
pitnc_flash.c:141:17: warning: implicit declaration of function ¡®i2c_smbus_read_byte¡¯ [-Wimplicit-function-declaration]
? 141 |? ? RXBlock[n] = i2c_smbus_read_byte(fd);
? ? ? |? ? ? ? ? ? ? ? ?^~~~~~~~~~~~~~~~~~~
pitnc_flash.c: In function ¡®main¡¯:
pitnc_flash.c:392:3: warning: implicit declaration of function ¡®i2c_smbus_write_byte¡¯ [-Wimplicit-function-declaration]
? 392 |? ?i2c_smbus_write_byte(fd, FEND);
? ? ? |? ?^~~~~~~~~~~~~~~~~~~~
/usr/bin/ld: /tmp/cc3KeZD7.o: in function `WaitForResponse':
pitnc_flash.c:(.text+0x9c): undefined reference to `i2c_smbus_read_byte'
/usr/bin/ld: /tmp/cc3KeZD7.o: in function `main':
pitnc_flash.c:(.text+0xa20): undefined reference to `i2c_smbus_write_byte'
/usr/bin/ld: pitnc_flash.c:(.text+0xa34): undefined reference to `i2c_smbus_write_byte'
/usr/bin/ld: pitnc_flash.c:(.text+0xa48): undefined reference to `i2c_smbus_write_byte'
collect2: error: ld returned 1 exit status

I am running the latest raspberry pi os lite 2022-04-04. I tried with 32 bit and 64 bit. Same error.

Anybody else have this problem?

Regards,

Chris Andrist, KC7WSU
 

The utility is pre-compiled and available on this site under the heading TNC-96K Utility Software




Mat
 

Thanks everyone. I was using the pre-compiled, but it wasn't working. I downloaded it again and unzipped it and it worked.

Super weird.

Thanks Again!

Regards,

Chris

1 - 4 of 4