开云体育

MiniProSC sound card info for BAP 3.0.8

Dinoburb All Messages By This Member #13484 I have been attempting to set-up a G90, MiniProSC, Raspberry Pi remote set-up and I am flummoxed (technical term) on what the MiniPro returns as the sound card. ?When attempting to set-up WSJX I use the Icom 7100 as the radio and cannot figure out which of the 23 options presented. ?Having tried anything the indicated a USB sound card resulted in no successful set-up. I have the G90 set-up with VOX and I/O via LINE. ?The program cannot/will not read the radio. I’ve tried Julian’s set-up for FLRIG and here I cab select the Xeigu G90 but when it comes to the the sound card I’m presented with over 50 options starting with ?/dev/tty, /dev/tty0 on to /tty9 then its /dev/ttyAMAO ?and ?/dev/ttyprintk. ?Nothing seems to work and no data sent to the program AND the USB audio switch is grayed out under the XCVR Configuration! i need help in getting out of this rabbit hole!
Phil Culmer 2E0HGU All Messages By This Member #13485 开云体育 I would suggest getting a terminal window up, and typing aplay -l and seeing what you get, and then arecord -l and looking at the output from that. ? The output can still take a bit of deciphering, but it will hopefully give you a better idea of what to look for for your USB Audio. ? 73 Phil 2E0HGU
km4ack All Messages By This Member #13486 Most of the BAP users running the G90 hang out in this forum /g/KM4ACK-Pi/topics I don't own the MiniProSC but I believe it is similar to the Signalink. Look for the sound card that has "Codec" in the name. 73, de KM4ACK
Dave R All Messages By This Member #13488 73 toggle quoted message Show quoted text On Tue, Aug 17, 2021, 02:45 Dinoburb <fsgorman@...> wrote: I have been attempting to set-up a G90, MiniProSC, Raspberry Pi remote set-up and I am flummoxed (technical term) on what the MiniPro returns as the sound card.? When attempting to set-up WSJX I use the Icom 7100 as the radio and cannot figure out which of the 23 options presented.? Having tried anything the indicated a USB sound card resulted in no successful set-up. I have the G90 set-up with VOX and I/O via LINE.? The program cannot/will not read the radio. I’ve tried Julian’s set-up for FLRIG and here I cab select the Xeigu G90 but when it comes to the the sound card I’m presented with over 50 options starting with ?/dev/tty, /dev/tty0 on to /tty9 then its /dev/ttyAMAO ?and ?/dev/ttyprintk.? Nothing seems to work and no data sent to the program AND the USB audio switch is grayed out under the XCVR Configuration! i need help in getting out of this rabbit hole!
David AJ6RE All Messages By This Member #13500 Hi Dinoburb, I had the same experience, with the exact same configuration: G90, MiniProSC, Rpi mobile. I did the same thing, trying to emulate Julian's setup. In the end it turned out the addition of the CAT cable (USB) between the G90 and the Rpi was necessary. I was pulling my hair out for about 2 weeks until I figured that out. Good luck! 73's David AJ6RE
David AJ6RE All Messages By This Member #13501 Hi Dinoburb, Just to clarify, you should add a CAT cable and then you will see the USB inputs you are looking for in FLRIG. 73 David AJ6RE
Don Poaps All Messages By This Member #13504 I use a Digirig interface for my G 90. () when I get a chance to go portable. I have had to use the blue USB vfo control in the past when USB ports got messed up.? 73 Don Poaps New Westminster, BC VA7DGP DATA VA7QU ? VOICE Winlink: va7qu@... Subject://wl2k ? ? ? ? ? ALLSTAR ?530780 HH# 5971 HH# 11384 Alberta Mesh# 5404 ? ? ? ? ? ? ? ? ? ? toggle quoted message Show quoted text On Wed, Aug 18, 2021 at 3:12 PM David AJ6RE <dc1@...> wrote: Hi Dinoburb, Just to clarify, you should add a CAT cable and then you will see the USB inputs you are looking for in FLRIG. 73 David AJ6RE
Dinoburb All Messages By This Member #13505 Thanks Dave, I’ll try that when I get back to my rig. ?I, too, was trying to replicate Julian’s set-up and having no luck. ?Again, thanks. I appreciate all the help that referred me to the MiniPro information on how to set it up with Windows, however, Raspberry Pi is not running Windows and I do have all of the MiniPro info.
Dinoburb All Messages By This Member #13511 I have added the CAT cable and have carefully watched Julian’s G90 Digital Modes Setup and I finally figured it out. ?FLRIG is your friend. Additionally, ?watching what nondescript audio codec he selected, and locating it among the 20+ options, I was finally able to get full access to my radio and digital modes through my RaspberryPi. ?The proper audio selection is: ?plughw:CARD=CODEC,dev=0 Once selected, my MiniPro worked like a champ and digital modes are ready to go! Thank you Julian, OH8STN.

Previous Topic Next Topic