开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. RaspberryPi-4-HamRadio
  2. Topics

WxtoImg and Pi4 - Receiver selection

 

I need assistance with the following: Options/Recording Options/
Receiver Type.? When I left click on the selection a list of radios?
appears but disappears when I release the left mouse button.?
I need to find R2FX on the list, but it is off the screen.? Is there a way I can release the left mouse button and have the list remain up so I can scroll down to select my radio type???
I am operating a Pi with Buster.? I have only had wxtoimg loaded a
few days and in the beginning receiver selection worked.
Any ideas or information will be greatly appreciated.
- Tony
WA6IOF
??
 

Hi Tony,

I came across your post because I was having similar issues selecting R2FX while running WxtoImg on the Pi. I just started running it on the Pi after running it on Windows for years. ?I know it has been a few months since your post but I have a solution for you, albeit a tedious one.

You can hold shift and click on the receiver selection and that should hold the drop down menu so that it is visible continuously. ?Then select the R139 receiver and with your keyboard arrow down 2 times. That will select the R2FX. ?Hit enter and you should see that R2FX is selected. I had to look at the Windows version to see how far down the R2FX was from the R139.

I know this is not a complete solution but it’s the best I can come up with for now.

73.

Clint, KC9S
 

Clint -?

Thank you very much for the information you sent relating how to select R2FX in wxtoimage.? A few days after sending my request there were no replies so I played with it and eventually got it.? I don't recall my method but what you explained is basically what I did.

It's nice to know I'm not the only one in this group using the R2FX with a Pi oriented wxtoimg program.??

Have a wonderful holiday season.??

- Tony
?WA6IOF

On Sunday, December 19, 2021, 11:54:14 PM PST, cprealm <clint.parrish@...> wrote:


Hi Tony,

I came across your post because I was having similar issues selecting R2FX while running WxtoImg on the Pi. I just started running it on the Pi after running it on Windows for years. ?I know it has been a few months since your post but I have a solution for you, albeit a tedious one.

You can hold shift and click on the receiver selection and that should hold the drop down menu so that it is visible continuously. ?Then select the R139 receiver and with your keyboard arrow down 2 times. That will select the R2FX. ?Hit enter and you should see that R2FX is selected. I had to look at the Windows version to see how far down the R2FX was from the R139.

I know this is not a complete solution but it’s the best I can come up with for now.

73.

Clint, KC9S

1 - 3 of 3