|
Fellow Hams,
I am pleased to announce that??is now available for public download!
Please use the attached BitTorrent file to make it easier for everyone to get the image.?And after you have completed downloading, please continue to seed for at least a week so other hams can benefit.
If you cannot or will not use BitTorrent, you may download HamPi from SourceForge:
Direct Download Link:?
If you run into issues, please post to the forum on? /g/Ham-Pi/?first. If you see a bug (defect), please report it on the GitHub issues page at:? Did you know that HamPi has a wiki? Find it at UPGRADING: In order to transition smoothly from HamPi 1.X to HamPi 1.1 and preserve your configuration settings, please follow the instructions in the attached file, "UPGRADING_FROM_PRIOR_VERSION.TXT" CHANGELOG: Version 1.2 (December 2020) Release ==================================== Base image: Raspbian OS Buster 2020-12-02 (Full release) Added Universal Ham Radio Remote (UHRR) Added RPiTx Added ACARS Decoder Added LeanSDR Added update scripts for Fldigi and WSJT-X Updated Fldigi Suite Updated WSJT-X Updated TQsl Minor fixes with SDRAngel installation Fixed BlueDV not launching from menu as expected Many other applications updated from Internet Hamlib 4.0 flxmlrpc 0.1.4 flrig 1.3.53 FLDigi 4.1.17 flaa 1.0.2 flamp 2.2.05 flcluster 1.0.4 fllog 1.2.6 flmsg 4.0.17 flnet 7.3.3 flpost 00.09.0 flwkey 1.2.3 flwrap 1.3.5 Pi Monitor 1.01.0 Pat 0.10.0 QSSTV 9.4.4 TQSL 2.5.7 TwClock 3.5 TwHamQTH 2.1 wxtoimg 2.11.2 mutability 1.15 pythonprop 0.30 wxtoimg 2.11.2 CMake 3.19.1 wxWidgets 3.1.3 Good luck and 73!
-- - Dave ??
|
Hello?
How can i update Cqrlog to the 1.2 v since there is a bug fix that fixed the communication between wsjt-x and cqrlog.
With v 2.3.0 there is a problem transferring? qso.
I have installed ver 2.4.0 on another pi system and it works as? it should be.
Thanks de 4x4fd
|
Is the torrent active? I see peers but no seeds.
|
How to send you a eQsl card to remove the notice? I tried via QRZ.
Stephane? VA2XMP
73
Le mar. 8 déc. 2020 01 h 00, Dave Slotter, W3DJS < slotter@...> a écrit?: Fellow Hams,
I am pleased to announce that??is now available for public download!
Please use the attached BitTorrent file to make it easier for everyone to get the image.?And after you have completed downloading, please continue to seed for at least a week so other hams can benefit.
If you cannot or will not use BitTorrent, you may download HamPi from SourceForge:
Direct Download Link:?
If you run into issues, please post to the forum on? /g/Ham-Pi/?first. If you see a bug (defect), please report it on the GitHub issues page at:? Did you know that HamPi has a wiki? Find it at UPGRADING: In order to transition smoothly from HamPi 1.X to HamPi 1.1 and preserve your configuration settings, please follow the instructions in the attached file, "UPGRADING_FROM_PRIOR_VERSION.TXT" CHANGELOG: Version 1.2 (December 2020) Release ==================================== Base image: Raspbian OS Buster 2020-12-02 (Full release) Added Universal Ham Radio Remote (UHRR) Added RPiTx Added ACARS Decoder Added LeanSDR Added update scripts for Fldigi and WSJT-X Updated Fldigi Suite Updated WSJT-X Updated TQsl Minor fixes with SDRAngel installation Fixed BlueDV not launching from menu as expected Many other applications updated from Internet Hamlib 4.0 flxmlrpc 0.1.4 flrig 1.3.53 FLDigi 4.1.17 flaa 1.0.2 flamp 2.2.05 flcluster 1.0.4 fllog 1.2.6 flmsg 4.0.17 flnet 7.3.3 flpost 00.09.0 flwkey 1.2.3 flwrap 1.3.5 Pi Monitor 1.01.0 Pat 0.10.0 QSSTV 9.4.4 TQSL 2.5.7 TwClock 3.5 TwHamQTH 2.1 wxtoimg 2.11.2 mutability 1.15 pythonprop 0.30 wxtoimg 2.11.2 CMake 3.19.1 wxWidgets 3.1.3 Good luck and 73!
--
- Dave
??
|
Hi Dave,
Please send out the file, "UPGRADING_FROM_PRIOR_", that was not attached to your announcement.? (Or put it on the wiki...)
(Only the torrent link was atached)
Tnx & 73,
Dave? WA8YWQ"Dave Slotter, W3DJS" <slotter@...> wrote:
Fellow Hams,
I am pleased to announce that??is now available for public download!
Please use the attached BitTorrent file to make it easier for everyone to get the image.?And after you have completed downloading, please continue to seed for at least a week so other hams can benefit.
If you cannot or will not use BitTorrent, you may download HamPi from SourceForge:
Direct Download Link:?
If you run into issues, please post to the forum on? /g/Ham-Pi/?first. If you see a bug (defect), please report it on the GitHub issues
page at:? Did you know that HamPi has a wiki? Find it at UPGRADING: In order to transition smoothly from HamPi 1.X to HamPi 1.1 and preserve your configuration settings, please follow the instructions in the attached file, "UPGRADING_FROM_PRIOR_VERSION.TXT" CHANGELOG: Version 1.2 (December 2020) Release ==================================== Base image: Raspbian OS Buster 2020-12-02 (Full release) Added Universal Ham Radio Remote (UHRR) Added RPiTx Added ACARS Decoder Added LeanSDR Added update scripts for Fldigi and WSJT-X Updated Fldigi Suite Updated WSJT-X Updated TQsl Minor fixes with SDRAngel installation Fixed BlueDV not launching from menu as expected Many other applications updated
from Internet Hamlib 4.0 flxmlrpc 0.1.4 flrig 1.3.53 FLDigi 4.1.17 flaa 1.0.2 flamp 2.2.05 flcluster 1.0.4 fllog 1.2.6 flmsg 4.0.17 flnet 7.3.3 flpost 00.09.0 flwkey 1.2.3 flwrap 1.3.5 Pi Monitor 1.01.0 Pat 0.10.0 QSSTV 9.4.4 TQSL 2.5.7 TwClock 3.5 TwHamQTH 2.1 wxtoimg 2.11.2 mutability 1.15 pythonprop 0.30 wxtoimg 2.11.2 CMake 3.19.1 wxWidgets 3.1.3 Good luck and 73!
--
- Dave
??
|
Well done, Dave. It installed quickly on my RPI4 (8Gb, dual
monitors).
And now for the "however." ;-)
After getting my monitors to display the panel and desktop items
on the desired monitor, I rebooted. Now the panel flashes on and
off about six times, then vanishes. I can use the Documents folder
to call up a terminal and run the vanilla lxpanel from a command
line. It is stable on the desktop but fails to show the RPI menu
icon.
Any thoughts as to which configuration file I should back up,
then either tweak or remove for a refresh to restabilize the
original panel?
With best regards,
Pete - NM5PS
On 12/7/20 11:00 PM, Dave Slotter,
W3DJS wrote:
toggle quoted message
Show quoted text
Fellow Hams,
I am pleased to announce that??is now available for
public download!
Please use the attached BitTorrent file to make it easier
for everyone to get the image.?And after you have completed
downloading, please continue to seed for at least a week so
other hams can benefit.
If you cannot or will not use BitTorrent, you may download
HamPi from SourceForge:
Direct Download Link:?
If you run into issues, please post to the forum on? /g/Ham-Pi/?first.
If you see a bug (defect), please report it on the GitHub
issues page at:?
Did you know that HamPi has a wiki? Find it at
UPGRADING: In order to transition smoothly from HamPi
1.X to HamPi 1.1 and preserve your configuration settings,
please follow the instructions in the attached file,
"UPGRADING_FROM_PRIOR_VERSION.TXT"
CHANGELOG:
Version 1.2 (December 2020) Release
====================================
Base image: Raspbian OS Buster 2020-12-02 (Full release)
Added Universal Ham Radio Remote (UHRR)
Added RPiTx
Added ACARS Decoder
Added LeanSDR
Added update scripts for Fldigi and WSJT-X
Updated Fldigi Suite
Updated WSJT-X
Updated TQsl
Minor fixes with SDRAngel installation
Fixed BlueDV not launching from menu as expected
Many other applications updated from Internet
Hamlib 4.0
flxmlrpc 0.1.4
flrig 1.3.53
FLDigi 4.1.17
flaa 1.0.2
flamp 2.2.05
flcluster 1.0.4
fllog 1.2.6
flmsg 4.0.17
flnet 7.3.3
flpost 00.09.0
flwkey 1.2.3
flwrap 1.3.5
Pi Monitor 1.01.0
Pat 0.10.0
QSSTV 9.4.4
TQSL 2.5.7
TwClock 3.5
TwHamQTH 2.1
wxtoimg 2.11.2
mutability 1.15
pythonprop 0.30
wxtoimg 2.11.2
CMake 3.19.1
wxWidgets 3.1.3
Good luck and 73!
--
- Dave
??
|
|
|
I should add that when I discovered this and couldn't immediately track down the cause, I reflashed the OS, and again, after the install finished and the system auto-rebooted, all was well - until I repeated my tweaking of the arrangement of panel and of desktop icons. Again, with a fresh boot-up the panel flashed about six times, then vanished.
W/much chin scratching and beard tugging,
Pete
Peter N. Spotts -- NM5PS
ARRL Public Information Coordinator, New Mexico Section
| Email: nm5ps@... | Skype: pspotts
AMSAT #40612 | CalQRP #67 | G-QRP #13202 | NAQCC #2446 | NEQRP #714
Polar Bear #348 | QCWA #34679 | QRP-ARCI #4174 | SKCC #4853S
Dec 9, 2020 04:04:39 4x4fdil@...:
toggle quoted message
Show quoted text
|
Am I doing something wrong or is version 1.2 quite a bit larger when extracted than version 1.1?
When I tried to burn an 16G SD Card with balanaEtcher, I got an error (the image is too large). So, I extracted the images locally and found out V1.1 was 12.11G where as the newer version 1.2 is 16.13G. Considering all I have is 16G SD Cards for my Raspberry Pi images, I'm unable to image an SD Card to get it to run. Is it possible to do a clean OS install and then a build?
Any ideas for those of us that never got larger SD Cards?
Eric, W7CSD
|
WalMart has SanDisk 32G cards for under 20 bucks
On Wed, Dec 9, 2020 at 11:17 AM Eric Struble < eric@...> wrote: Am I doing something wrong or is version 1.2 quite a bit larger when extracted than version 1.1?
When I tried to burn an 16G SD Card with balanaEtcher, I got an error (the image is too large). So, I extracted the images locally and found out V1.1 was 12.11G where as the newer version 1.2 is 16.13G. Considering all I have is 16G SD Cards for my Raspberry Pi images, I'm unable to image an SD Card to get it to run. Is it possible to do a clean OS install and then a build?
Any ideas for those of us that never got larger SD Cards?
Eric, W7CSD
|
Did a check on the WM site after the heads up on the cards.? Within the pickup and delivery side, they are listing the SanDisk 32 GB ultra class 10 cards for $9.48 and the 64 GB versions for $13.98. Can get free delivery or pickup depending on total order.? So add some groceries and hopefully it will all be good.
this is in central Indiana.? Your mileage may vary and all that.
73s Chuck KD9DVB
On Wednesday, December 9, 2020, 6:03:44 PM EST, N5XMT <dacooley@...> wrote:
WalMart has SanDisk 32G cards for under 20 bucks
On Wed, Dec 9, 2020 at 11:17 AM Eric Struble < eric@...> wrote: Am I doing something wrong or is version 1.2 quite a bit larger when extracted than version 1.1?
When I tried to burn an 16G SD Card with balanaEtcher, I got an error (the image is too large). So, I extracted the images locally and found out V1.1 was 12.11G where as the newer version 1.2 is 16.13G. Considering all I have is 16G SD Cards for my Raspberry Pi images, I'm unable to image an SD Card to get it to run. Is it possible to do a clean OS install and then a build?
Any ideas for those of us that never got larger SD Cards?
Eric, W7CSD
|
After playing around a bit more, a hypothesis: A change from no
password needed to password required at login may be the culprit
(or not).
In looking for ways to autostart lxpanel because the HamPi panel
was conking out on login, I found instructions for setting up
programs to autostart that only work if no password is required at
login. So I followed the instructions and set up and configured
the *.desktop file needed in a newly created /.config/autostart
directory. I then made sure to reset my login option for no
password, rebooted, and presto, up came a stable menu/application
bar with all of the HamPi default entries on it. On a hunch, I
deleted the /.config/autostart folder, rebooted again, and up
popped a stable HamPi menu/application bar.
At least I'm back in business, just in time for this weekend's
SKCC Weekend Sprintathon.? ;-)
With best regards,
Pete
Are there any ideas?
?
--
Peter N. Spotts - NM5PS
ARRL Public Information Coordinator, New Mexico Section
New Mexico mapping coordinator, Parks on the Air
Email: nm5ps@... | Skype: pspotts
AMSAT #40612 | CalQRP #67 | G-QRP #13202 | NAQCC #2446 | NEQRP #714
Polar Bear #348 | QCWA #34679 | QRP-ARCI #4174 | SKCC #4853S
|
Dave Slotter, W3DJS
Eric Struble