Please pardon this being slightly off topic, but a number of members of
this group have written me to ask if there would be a version of the
TNC-Pi available for the Beaglebone Black. While the BBB is slightly
more expensive than the Pi it has a somewhat more powerful processor,
better graphics and much more I/O (including multiple serial ports).

There is a now a TNC "cape" for this computer available. You can find
full information at www.tnc-x.com/TNCBlack.htm
<>

John Hansen W2FS
Coastal ChipWorks

?

Very nice John. Any more thinking about a 9600 baud TNC product?

Tim N9PUZ

On 6/8/2014 10:29 AM, John Hansen coastalchip@...

[Raspberry_Pi_4-Ham_RADIO] wrote:
>
>
> Please pardon this being slightly off topic, but a number of members of
> this group have written me to ask if there would be a version of the
> TNC-Pi available for the Beaglebone Black. While the BBB is slightly
> more expensive than the Pi it has a somewhat more powerful processor,
> better graphics and much more I/O (including multiple serial ports).
>
> There is a now a TNC "cape" for this computer available. You can find
> full information at

> <>

>
> John Hansen W2FS
> Coastal ChipWorks

?

The prototypes of the 9600 baud are out for beta testing right now!

John W2FS

On Sun, Jun 8, 2014 at 5:45 PM, Tim McDonough N9PUZ tim.n9puz@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

Very nice John. Any more thinking about a 9600 baud TNC product?

Tim N9PUZ

On 6/8/2014 10:29 AM, John Hansen coastalchip@...

[Raspberry_Pi_4-Ham_RADIO] wrote:
>
>
> Please pardon this being slightly off topic, but a number of members of
> this group have written me to ask if there would be a version of the
> TNC-Pi available for the Beaglebone Black. While the BBB is slightly
> more expensive than the Pi it has a somewhat more powerful processor,
> better graphics and much more I/O (including multiple serial ports).
>
> There is a now a TNC "cape" for this computer available. You can find
> full information at

> <>

>
> John Hansen W2FS
> Coastal ChipWorks

?

Are they for rpi? ?Or bbblack?

Sent from my abacus

On Jun 8, 2014, at 5:48 PM, "John Hansen coastalchip@... [Raspberry_Pi_4-Ham_RADIO]" <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

The prototypes of the 9600 baud are out for beta testing right now!

John W2FS

On Sun, Jun 8, 2014 at 5:45 PM, Tim McDonough N9PUZ tim.n9puz@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

Very nice John. Any more thinking about a 9600 baud TNC product?

Tim N9PUZ

On 6/8/2014 10:29 AM, John Hansen coastalchip@...

[Raspberry_Pi_4-Ham_RADIO] wrote:
>
>
> Please pardon this being slightly off topic, but a number of members of
> this group have written me to ask if there would be a version of the
> TNC-Pi available for the Beaglebone Black. While the BBB is slightly
> more expensive than the Pi it has a somewhat more powerful processor,
> better graphics and much more I/O (including multiple serial ports).
>
> There is a now a TNC "cape" for this computer available. You can find
> full information at

> <>

>
> John Hansen W2FS
> Coastal ChipWorks

?

The 9600 baud boards are for the Raspberry Pi. ? If there is sufficient interest/demand, it would not be hard to produce a version for the BBB.

John W2FS

???

On Jun 10, 2014 12:43 PM, "Tadd Torborg tadd@... [Raspberry_Pi_4-Ham_RADIO]" <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

Are they for rpi? ?Or bbblack?

Sent from my abacus

On Jun 8, 2014, at 5:48 PM, "John Hansen coastalchip@... [Raspberry_Pi_4-Ham_RADIO]" <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

The prototypes of the 9600 baud are out for beta testing right now!

John W2FS

On Sun, Jun 8, 2014 at 5:45 PM, Tim McDonough N9PUZ tim.n9puz@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

Very nice John. Any more thinking about a 9600 baud TNC product?

Tim N9PUZ

On 6/8/2014 10:29 AM, John Hansen coastalchip@...

[Raspberry_Pi_4-Ham_RADIO] wrote:
>
>
> Please pardon this being slightly off topic, but a number of members of
> this group have written me to ask if there would be a version of the
> TNC-Pi available for the Beaglebone Black. While the BBB is slightly
> more expensive than the Pi it has a somewhat more powerful processor,
> better graphics and much more I/O (including multiple serial ports).
>
> There is a now a TNC "cape" for this computer available. You can find
> full information at

> <>

>
> John Hansen W2FS
> Coastal ChipWorks

?

The 9600 baud boards are for the Raspberry Pi. ? If there is sufficient interest/demand, it would not be hard to produce a version for the BBB.

John W2FS

???

On Jun 10, 2014 12:43 PM, "Tadd Torborg tadd@... [Raspberry_Pi_4-Ham_RADIO]" <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

Are they for rpi? ?Or bbblack?

Sent from my abacus

On Jun 8, 2014, at 5:48 PM, "John Hansen coastalchip@... [Raspberry_Pi_4-Ham_RADIO]" <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

The prototypes of the 9600 baud are out for beta testing right now!

John W2FS

On Sun, Jun 8, 2014 at 5:45 PM, Tim McDonough N9PUZ tim.n9puz@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

Very nice John. Any more thinking about a 9600 baud TNC product?

Tim N9PUZ

On 6/8/2014 10:29 AM, John Hansen coastalchip@...

[Raspberry_Pi_4-Ham_RADIO] wrote:
>
>
> Please pardon this being slightly off topic, but a number of members of
> this group have written me to ask if there would be a version of the
> TNC-Pi available for the Beaglebone Black. While the BBB is slightly
> more expensive than the Pi it has a somewhat more powerful processor,
> better graphics and much more I/O (including multiple serial ports).
>
> There is a now a TNC "cape" for this computer available. You can find
> full information at

> <>

>
> John Hansen W2FS
> Coastal ChipWorks

?

John do you have a rough idea on price?? I would have to wait for bult boards.? Will they also throttle down if needed to 1200?? I have two GE Rangr UHF radios that are almost ready for these.?? One going in a high spot locally and one going in my Van.

Sounds great!

Ronny

K4RJJ

On Tue, Jun 10, 2014 at 3:51 PM, John Hansen coastalchip@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

The 9600 baud boards are for the Raspberry Pi. ? If there is sufficient interest/demand, it would not be hard to produce a version for the BBB.

John W2FS

???

On Jun 10, 2014 12:43 PM, "Tadd Torborg tadd@... [Raspberry_Pi_4-Ham_RADIO]" <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

Are they for rpi? ?Or bbblack?

Sent from my abacus

On Jun 8, 2014, at 5:48 PM, "John Hansen coastalchip@... [Raspberry_Pi_4-Ham_RADIO]" <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

The prototypes of the 9600 baud are out for beta testing right now!

John W2FS

On Sun, Jun 8, 2014 at 5:45 PM, Tim McDonough N9PUZ tim.n9puz@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

Very nice John. Any more thinking about a 9600 baud TNC product?

Tim N9PUZ

On 6/8/2014 10:29 AM, John Hansen coastalchip@...

[Raspberry_Pi_4-Ham_RADIO] wrote:
>
>
> Please pardon this being slightly off topic, but a number of members of
> this group have written me to ask if there would be a version of the
> TNC-Pi available for the Beaglebone Black. While the BBB is slightly
> more expensive than the Pi it has a somewhat more powerful processor,
> better graphics and much more I/O (including multiple serial ports).
>
> There is a now a TNC "cape" for this computer available. You can find
> full information at

> <>

>
> John Hansen W2FS
> Coastal ChipWorks

?

Alinco mobile radios are supposed to do 9600.?

I hope to use surplus kenwood tk860 UHF radios

Sent from my abacus

On Jun 10, 2014, at 7:38 PM, "Ronny Julian k4rjjradio@... [Raspberry_Pi_4-Ham_RADIO]" <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

John do you have a rough idea on price?? I would have to wait for bult boards.? Will they also throttle down if needed to 1200?? I have two GE Rangr UHF radios that are almost ready for these.?? One going in a high spot locally and one going in my Van.

Sounds great!

Ronny

K4RJJ

On Tue, Jun 10, 2014 at 3:51 PM, John Hansen coastalchip@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

The 9600 baud boards are for the Raspberry Pi. ? If there is sufficient interest/demand, it would not be hard to produce a version for the BBB.

John W2FS

???

On Jun 10, 2014 12:43 PM, "Tadd Torborg tadd@... [Raspberry_Pi_4-Ham_RADIO]" <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

Are they for rpi? ?Or bbblack?

Sent from my abacus

On Jun 8, 2014, at 5:48 PM, "John Hansen coastalchip@... [Raspberry_Pi_4-Ham_RADIO]" <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

The prototypes of the 9600 baud are out for beta testing right now!

John W2FS

On Sun, Jun 8, 2014 at 5:45 PM, Tim McDonough N9PUZ tim.n9puz@... [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...> wrote:

?

Very nice John. Any more thinking about a 9600 baud TNC product?

Tim N9PUZ

On 6/8/2014 10:29 AM, John Hansen coastalchip@...

[Raspberry_Pi_4-Ham_RADIO] wrote:
>
>
> Please pardon this being slightly off topic, but a number of members of
> this group have written me to ask if there would be a version of the
> TNC-Pi available for the Beaglebone Black. While the BBB is slightly
> more expensive than the Pi it has a somewhat more powerful processor,
> better graphics and much more I/O (including multiple serial ports).
>
> There is a now a TNC "cape" for this computer available. You can find
> full information at

> <>

>
> John Hansen W2FS
> Coastal ChipWorks