Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Distorted CW and SSB signals RACAL 6790/GM
Check the +5.2 VDC on the A7 card, adjust the pot a couple of times and see if the noise goes away.
Gary E Wingerd ---------- Original Message ---------- From: "Patrick P via groups.io" <sbus1313@...> To: [email protected] Subject: [RacalRadio] Distorted CW and SSB signals RACAL 6790/GM Date: Sat, 10 May 2025 19:28:31 -0700 Greetings,
?
Just got an RA6790/GM which works great on AM.? CW and SSB is garbled and distorted.? Ran a BITE test with no faults found.? It has 5 filters installed.? Selecting between them on CW makes no difference.? Any ideas?
?
Regards,
Patrick
|
I just replace them when I get a bad one, they had the same problem when they were field returns at RACAL, they cleaned the board super good when they were built, they started putting the trimmer pots on after cleaning, the trim pots still had oxidation after a few years.
?
Gary ---------- Original Message ---------- From: "Patrick P via groups.io" <sbus1313@...> To: [email protected] Subject: Re: [RacalRadio] Distorted CW and SSB signals RACAL 6790/GM Date: Sat, 10 May 2025 20:26:48 -0700 Absolutely brilliant Gary,
?
Just touching that pot cleared it up.? Thank you so much!? Maybe a shot of DeoxIT may help keep it going another 40 years?
?
73,
Patrick
|
to navigate to use esc to dismiss