开云体育

BCC39B Vehicle Mount Handbook

Stuart Mckinnon All Messages By This Member #1789 开云体育 Howard ? When you say vehicle mount, do you mean the VIU (PSU and Amp) or rails that the 39 sits or attaches to? ? Stuart G0TBI
Stuart Mckinnon All Messages By This Member #1791 开云体育 Very Good ? Was that one I saw on e pay, and I take it it's working, all you have to do now is find a way of attaching to vehicle, the rails or runners as some call them, I could never find, I have 4 Panther 'H' in vehicle format, one in manpack role, one of the vehicle ones comes up, synth out of lock, must strip it down one day, I did that with three non working syncal 2000's, changed boards from one to another, after 10 min's, all working, whoopee! ? Stuart
Howard Small All Messages By This Member #1788 I have finally acquired a vehicle mount for my BCC39B and am looking for either a handbook or information on the various switch settings. Hopefully, Howard VK4BS
Howard Small All Messages By This Member #1790 Stuart The PSU and Amp (I assume both are in it) that has switches for HP and Boost plus connections for Audio, Harness and ATU. Howard toggle quoted message Show quoted text On 8/07/2010 17:48, Stuartjmckinnon@... wrote: Howard When you say vehicle mount, do you mean the VIU (PSU and Amp) or rails that the 39 sits or attaches to? Stuart G0TBI
Howard Small All Messages By This Member #1792 Yeah, missed out on first one, got the second on a second chance offer but should have bought the third at half price! Never mind, I have had the BCC39B for at least seven years, probably longer, and this is the first time I have seen the VIU come up for sale. Is brand new but I had trouble fitting the radio to it. Broke one of the mounts on the VIU trying to do up the spring clip then realised it had a block on top of the heatsink that was stopping the radio fitting properly. Took that off an all fine but now need to find out what some of the settings are and find a power connector. As for mounting it, I will have a close look at how PA5TJ did it ( <>) and see if I can make one too. Howard VK4BS toggle quoted message Show quoted text On 8/07/2010 18:26, Stuartjmckinnon@... wrote: Very Good Was that one I saw on e pay, and I take it it's working, all you have to do now is find a way of attaching to vehicle, the rails or runners as some call them, I could never find, I have 4 Panther 'H' in vehicle format, one in manpack role, one of the vehicle ones comes up, synth out of lock, must strip it down one day, I did that with three non working syncal 2000's, changed boards from one to another, after 10 min's, all working, whoopee! Stuart
Howard Small All Messages By This Member #1812 I have not found a handbook yet and the thing that puzzled me most was the mode selection switch that had positions L-R-A-I-Call. I figured that L=Local, R=Remote, I=Intercom but could not work out A until I saw my PTR4400 has basically the same settings and A on it stands for Automatic. That position is for the situation where two radios have their remote posts connected by a cable pair. When one receives, the other goes to transmit so the audio is rebroadcast. I reckon that is what the A is on the BCC39 VIA (but am prepared to be proven wrong). Tomorrow I will try connecting the PTR4400 and BCC39B together and see what happens... Howard VK4BS
JC All Messages By This Member #1814 Hi Howard, Sounds interesting, pls let us know the result of your test. G-day JC VE7OI toggle quoted message Show quoted text --- On Thu, 7/22/10, Howard Small <howard@...> wrote: From: Howard Small <howard@...> Subject: Re: [Racal-manpacks] BCC39B Vehicle Mount Handbook To: Racal-manpacks@... Date: Thursday, July 22, 2010, 2:21 AM ? I have not found a handbook yet and the thing that puzzled me most was the mode selection switch that had positions L-R-A-I-Call. I figured that L=Local, R=Remote, I=Intercom but could not work out A until I saw my PTR4400 has basically the same settings and A on it stands for Automatic. That position is for the situation where two radios have their remote posts connected by a cable pair. When one receives, the other goes to transmit so the audio is rebroadcast. I reckon that is what the A is on the BCC39 VIA (but am prepared to be proven wrong). Tomorrow I will try connecting the PTR4400 and BCC39B together and see what happens... Howard VK4BS ------------------------------------ Yahoo! Groups Links ? ? Racal-manpacks-fullfeatured@...
Howard Small All Messages By This Member #1817 The A is for Automatic with a connection via the remote terminals. However a direct connection can only be used PTR4400 to PTR4400. For PTR4400 to HF set there is an interface adapter. When I hooked them directly together I could get the VHF to retransmit the HF audio but not reliably. Howard VK4BS

Previous Topic Next Topic