开云体育

Racal Handset

Scott Dorsey All Messages By This Member #1595 I have a PRM4090 and a Syncal-30, both missing handsets. They take a standard 7-pin or 6-pin military M-S connector, as found in US military stores (or from Amphenol). However, if I put a PRC-25 handset on them, I get very low modulation, making me think the handset output is not correct. When I talked about this year before, I got numerous replies telling me to buy handsets on Ebay, that they were all over. Well, none of them are in the US... and after a year of looking I bit the bullet and spent way too much shipping for a handset marked 5965-99-620-5669 which claims to be for the Clansman sets. It has a connector that looks identical except for one guide mark in a different place. So.... anyone in the US care to trade for a handset that will actually work with the Syncal-30? Or is this the right general handset with the wrong connector? --scott
Wal Badz All Messages By This Member #1600 Hi Scott, Check out this item, 190375189093 presently on ebay. The seller states that it has the proper 6-pin connector for the syncal 30 radio. Regards Wal, G4CGF toggle quoted message Show quoted text --- In Racal-manpacks@..., Scott Dorsey <kludge@...> wrote: I have a PRM4090 and a Syncal-30, both missing handsets. They take a standard 7-pin or 6-pin military M-S connector, as found in US military stores (or from Amphenol). However, if I put a PRC-25 handset on them, I get very low modulation, making me think the handset output is not correct. When I talked about this year before, I got numerous replies telling me to buy handsets on Ebay, that they were all over. Well, none of them are in the US... and after a year of looking I bit the bullet and spent way too much shipping for a handset marked 5965-99-620-5669 which claims to be for the Clansman sets. It has a connector that looks identical except for one guide mark in a different place. So.... anyone in the US care to trade for a handset that will actually work with the Syncal-30? Or is this the right general handset with the wrong connector? --scott
janicehansom All Messages By This Member #1601 开云体育 These sets are not Clansman, nor are they Larkspur. Larkspur handsets use the 6 pin Plessey connector. The headset on e-bay 190375189093 will fit. This is a Racal headset of that era. There are handsets about sometimes with a 6 pin and sometimes with a 7 pin plug. Both are compatible with the 7 pin socket. Obviously only the 6 pin is compatible with the 6 pin socket. Hope this helps. ?????????????????????????????????????????????? kind regards John ????????

Previous Topic Next Topic