开云体育

Dennis MRF-401? You say these are good final transistors for my 921? ok..i will try to find them.. are they readily available??My radio uses a matched set? It would be the answer to a prayer! I will

hi dennis.. Are the transistors your looking for the finals transistors? If you have ant luck please let me know too.? I have a racal 921 and need a source for good finals too.? i have sent out

Many thanks, Dennis, will do. Best rgds., Peter, DC6BN

Use MRF-401. It will actually work a little better than the originals. Available from: http://www.rfparts.com/index.html Dennis Starks Military-Radio-Guy KB0SFP Monitor(all USB): 3996, 5403.5,

Hello all, does someone know where to get a (matched) pair of the 2N5070 (Racal No. 711356) or a substitute, please? Thank you and 73s, Peter, DC6BN

http://www.edp24.co.uk/content/edp24/news/story.aspx?brand=EDPOnline&category=News&tBrand=EDPOnline&tCategory=xDefault&itemid=NOED23%20Mar%202010%2012%3A30%3A52%3A797

http://www.ermag.com/index.cfm?v_link=product_detail&v_key=415

Hi, Does anyone have a power switch for a 931P? This is the 3-position rotary switch (Off, Low Power, High Power). A friend has a radio with this switch missing and is looking for one. Any help/info

Hello, Does anyone have any User manuals or notes on the Yeoman Racal TRA 3910 please. Regards, Martin M0MGA

Hi all please see my clansman bits on

Pete: I have modified two TRA-921's to work on 60M. This is not a clarifier, but it is very simple to do. The MHz knob on the radio selects a crystal oscillator for each 1 MHz band from 2 to 7 MHz.

Hi group: I would like some help to find schematics or service manual for old transceiver Racal TR-38D. I think it was manufactured in South Africa ! Thanks a lot.

Hello, folks, Has anyone any experience with fitting a clarifier (tx and rx) to the synth on a TRA 921? I've acquired a couple of these radios, and one of the applications I intend for one of them

Hi all i have a clansman prc-320 test set on ebay, item number 290416942496 it consists of the test equipment for testing the moduals and also a very nice jig for holding the radio when out of the

I have a Comcal 30 on ebay 130378476230 73 de Gerald

hi martin? how much are you asking for one of these?? Do they work well and are the finals good and all the other components?I got burned on my last purchase not willing to be burned again!tell me

In my last post it should read BCC567HD Regards Dave g1jwg