开云体育

Evening all, I'm after some information about a battery for the PRM4720/4515. I have a charged battery (which soon won't be!) that I'm hoping to re-cell with three Lithium 18650 batteries and

So very Sorry to hear this, Stuart. Do you remember the serial number of the radio and the VIU? I know they are easily removable, but may help more if known by everybody who moves in these circles.

Ladies and Gents Please diseminate Stuart G0TBI This happened at an event at South Cerney on the weekend ----- Forwarded message ----- From: Stuart Mckinnon <stuartjmckinnon@...>To: VMARS

Hi all, I have 2 off 2.45m whips 711036 for the TRA967 available, new and unused. These have the smaller diameter mating end than the HF whips. UK based. Drop me a pm for more details and photos.

Hi, All of the equipment listed below is from the estate of G4DDN (SK). I have been asked by the family of G4DDN to dispose of this equipment, all proceeds will go to the family. I need to dispose of

Hi all, I have a new-in-packet 2.45m whip 711036 for the TRA967 which I don’t need. I do need a whip for the Squadcal, 711017, new or used, to try out on my set. Would anyone like to swap antennas?

Answering my own query...? It is indeed a wideband IF converter from 40.455 MHz to 21.4 MHz, designed to cope with a very wide range of signal levels.? It takes the IF input from before the first

Hi everyone, I am restoring an RT422B, it is complete with PSU, cables etc. Very little information on the WWW. I actually used this rig to talk to Dave Dave Larsen, years ago. It has been mothballed

Cleaning out a TR38C, the circuits are close to the TR28, but I am hoping someone has a manual or at least the circuit diagramme. Cannot find anything on the WWW. Any assistance will be appreciated!

Hi Petr Sorry I missed the bit about it being a battery magazine! The batteries I have bought from Axess are lasting well and about ?40! They are slightly larger than the original issue ones. They

Hello Robin, thanks for hint. It seems interesting even although I was thinking about MA-4516B which is the container for 8x AA cells. It seems to be more flexible as cells can be replaced when they

You searched for 4515 axessinternational.com Robin G?GNE

Hi folks, is it possible to find somewhere the MA-4516B battery pack please? My lithium battery pack is dead (both of them I have) and I have no idea how to power it except using it together with

Has anyone compiled this into a burnable hex file? -- This email has been checked for viruses by Avast antivirus software. www.avast.com

a6a2@... A6A2 @ talktalk .com Here is my buddy Morse .- -.... .- ..--- .--.-. - .- .-.. -.- - .- .-.. -.- .-.-.- -.-. --- --

?Hi Damien, these normally had a big yellow sticker on the back that said “this radio is not secure”. Internally the pins on the encryption board should have 4 jumper wires to bypass the CVSD

Ah ok cool that's clever.I didn't think it was the battery but it did have me guessing ?. I haven't tried A/B setting as the guy I purchased the Couger from told me it didn't have the encryption

Hi Damian, it means you’re in clear mode (ie: not encrypted) as these radios also offered an encryption module. If you hear a constant 1hz roughly blip, it reminds the user that you’re speaking on

Hi Bob Thanks for the reply yeah I did some digging and found the same answer but thank you for the confirmation. I have discharged and recharged my SMT battery now and had a couple of QSOs with the

They are nicad. But they are getting old now and individual cells are failing! Robin G?GNE