开云体育

hi roly i have one and to give you a heads up its very hard to find parts.? ive replaced the finals with a close match but not the correct ones. I asked every place i can think of.? im only doing

HI-G makes an equivalent. However, I bet if you drill a hole in the side and squirt a little Cramolin in there, they will clean right up. --scott

Racal Syncal30 12v relays anyone? Does anyone have, or know of, a supply of the small metal cased single pole changeover relays as used in the rx section of the Racal Syncal30 please. Racal Part

I find my VRC-321 is great for 5MHz and other spot frequencies, but as Gerald says, it's not great for tuning around looking for a QSO. There have been some discussions on modifying the set to allow

You're not the first to say this. Good point about the paint!

Hi gang, I am curious about using a TRA 921 I used it in the 80s while in the army and want to know if there is some place i can buy a working one these days. Thank you

Philip The 321 is a great radio on preset Freq's not at all good to tune around a band. I go for a good working set with a nice front panel & I rub the case down & repaint it. I have found in the past

Actually, look for good solid info on whether the 321 is a "GOOD" radio and may look for new kit as there is so much available. Thanks Philip KA4KOE

Test Tx at 13.25hrs Saturday Stuart G0TBI

dear members, i have a 931 unit which is working fine on rx mode ,but in tx mode in ssb a side tone also gets transmitted is it possible to eliminate the side tone venu, vu2mvx

Philip you need to ask on the VMARS group a few of the members have done the mod, my VRC321/322 has had the mod done by Colin G4DDI & it works very well. The 322 dose take a little time to tune up

Looking for info on new kit for this setup. How easily can one do the LSB modification? Thanks Philip KA4KOE

I want to add you as a friend so you can see my profile with my pictures.Here is the link: http://www.ourlivespace.com/hotcoolguy/addme.htm

HI, I know it was 5 years ago.But did you ever get any info on the VRM5080? Jeff

Hi Mike i hwas hoping you could hlep me locate teo u14630 transistors for my? tra 921 do you have any idea where to look.? ive found them in bulk supplires but i only need two..any help you can give

Mike nothing approximating that name appears in the vmars records Richard G7RVI Sent: Wednesday, December 23, 2009 8:18 AM To: undisclosed-recipients: Subject: [Racal-manpacks] Lost contact! Does

Hi Group Just in between Mince pies, I thought I would ask the Clansman experts if they have any spare cables or can tell me what to look out for, re harness cables for the 320, 353, and 351 Trying to

Hi Group Anyone got a Siemens Plessey PV 5360 Mains battery Charger, Plessey number 605/1/14020, any help in locating one of these chargers gladly received, photo in appropriate section Stuart G0TBI

Marry Xmas and a happy new year from ISRAEL the HOLYLAND. Baruch 4z4rb Baruch Zilbershatz Call sign : 4z4 rb Baruch Zilbershatz Nitzanay-Oz 118 Nitzanay-Oz 42836 ISRAEL