¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. RacalRadio
  2. Messages
Expanded Topics Messages Polls
Date
Re: Racal TA 940B

rfinch62
 

Hi Stuart the TA940 amp was originally used with a manual ATU which was approx the same size as the TA940 and mounted in frame unit made of steel box section painted black. Regards Bob Finch

--- In Racal-manpacks@..., Stuartjmckinnon@... wrote:


Hi Group

I was sorting out in the shack today, I have both the TA 940B and the TA
936 PSU, that accompanies the 940, does anyone have any library pictures of
this setup, in vehicle frame etc, I am not sure actually, what Auto ATU was
designated for the 940B, does anyone have any knowledge?

Any help appreciated

Stuart
G0TBI

P.S. if Vic Tuff is reading this, will you please make contact, you seem to
have dropped off the Radar??
Re: MA 988 loudspeaker for sell please reply directly with email.

 

Does it connect to the radio? In the free mike socket? im interested but have no idea what its worth..i can offer american $20.00?provided its in good working order.?It has to be in good working order though..please give me a ball park price as im not versed in these items,? i have a racal 921 and it would help me keep the authenticity of the set..i even refurbished a wooden cabinnet in army green!? I'll offer $20.00american and shipping give me a counter offer if you want? we can negoiate? I do want this piece.im just not sure what its worth.
thank you very much
dave
KG4LQT

?

From: radio_collectors
To: Racal-manpacks@...
Sent: Fri, June 11, 2010 3:07:24 AM
Subject: [Racal-manpacks] MA 988 loudspeaker for sell please reply directly with email.

?

MA 988 loudspeaker for sell, works great no problems will sell for the right price . This one was very hard to find make a offer if right I will sell it, I do know how hard these are to get will send photo or upload later please reply directly with email.
MA 988 loudspeaker for sell please reply directly with email.

 

MA 988 loudspeaker for sell, works great no problems will sell for the right price . This one was very hard to find make a offer if right I will sell it, I do know how hard these are to get will send photo or upload later please reply directly with email.
Racal TA 940B

 

¿ªÔÆÌåÓý

Hi Group
?
I was sorting out in the shack today, I have both the TA 940B and the TA 936 PSU, that accompanies the 940, does anyone have any library pictures of this setup, in vehicle frame etc, I am not sure actually, what Auto ATU was designated for the 940B, does anyone have any knowledge?
?
Any help appreciated
?
Stuart
G0TBI
?
P.S. if Vic Tuff is reading this, will you please make contact, you seem to have dropped off the Radar??
Re: Plessey SL600 Series Apps Manual

 

¿ªÔÆÌåÓý

Hello Ben,
?
do you receive my message with my adress ?
?
Alain

----- Original Message -----
Sent: Thursday, June 10, 2010 5:10 PM
Subject: Re: [Racal-manpacks] Plessey SL600 Series Apps Manual

In a message dated 10/06/2010 15:13:11 GMT Daylight Time, alain.betemps@... writes:
Hello Ben,
Sold !
regards
Alain
------------------
?
chq or such to
?
B Nock
62 Cobden St
Kidderminster
Worsc DY11 6RP
?
and let me have your address.
?
cheers, Ben.
?

Re: Plessey SL600 Series Apps Manual

 

¿ªÔÆÌåÓý

Hello Ben,
?
?
Sold !
?
?
regards
?
Alain
?
?

----- Original Message -----
Sent: Thursday, June 10, 2010 3:29 PM
Subject: [Racal-manpacks] Plessey SL600 Series Apps Manual

Plessey SL600 Series Apps Manual
?
2nd edition. IC's as used in the RT/PRC320
92 pages.
?
?5 posted UK.
?
Ben.

Re: Plessey SL600 Series Apps Manual

 

¿ªÔÆÌåÓý

In a message dated 10/06/2010 16:11:32 GMT Daylight Time, Military1944@... writes:
In a message dated 10/06/2010 15:13:11 GMT Daylight Time, alain.betemps@wanadoo.fr writes:
Hello Ben,
Sold !
regards
Alain
------------------
?
opps sorry, should have read message better, simply hit 'reply' and it went to group.
?
sorry for bw.
?
Ben.
?
Re: Plessey SL600 Series Apps Manual

 

¿ªÔÆÌåÓý

In a message dated 10/06/2010 15:13:11 GMT Daylight Time, alain.betemps@... writes:
Hello Ben,
Sold !
regards
Alain
------------------
?
chq or such to
?
B Nock
62 Cobden St
Kidderminster
Worsc DY11 6RP
?
and let me have your address.
?
cheers, Ben.
?
Plessey SL600 Series Apps Manual

 

¿ªÔÆÌåÓý

Plessey SL600 Series Apps Manual
?
2nd edition. IC's as used in the RT/PRC320
92 pages.
?
?5 posted UK.
?
Ben.
Re: 6 pin plugs. Larkspur

 

HI Ben, Can you contact me offline and i will send you some pictures of what plugs i am looking for. Jeff


From: Jeff Akines
To: Racal-manpacks@...
Sent: Tue, June 8, 2010 7:02:37 PM
Subject: Re: [Racal-manpacks] Re: 6 pin plugs. Larkspur

?

HI Ben,
Plugs in post
Jeff

From: "Military1944@ "
To: Racal-manpacks@ yahoogroups. com
Sent: Sun, May 30, 2010 9:37:09 AM
Subject: Re: [Racal-manpacks] Re: 6 pin plugs. Larkspur

?

Your probably quite right.
?
?
?
In a message dated 29/05/2010 18:19:22 GMT Daylight Time, spike.dennis@ writes:
Maybe some of this back-forth semi-personal traffic would best be done off list so as to save the rest of us unnecessary email clutter.

From: jeff.akines
To: Racal-manpacks@ yahoogroups. com
Sent: Sat, May 29, 2010 11:53:50 AM
Subject: [Racal-manpacks] Re: 6 pin plugs. Larkspur

?
< p>

HI Ben,
Are you saying in your message that you do or dont have what iam looking for? the cables i have only have the plug on 1 end you will need 2 to make up a lead. send me your address and i will send you a couple for the cost of the postage.
Jeff

--- In Racal-manpacks@ yahoogroups. com, Military1944@ ... wrote:
>
>
> In a message dated 29/05/2010 13:08:49 GMT Daylight Time,
> jeff.akines@ ... writes:
>
> I have a large number 0f 6 pin plugs with cable attached still in there
> original packaging labeled Z42-5995-99- 9232 CORD ASSY QTY.1 DON (CP) JAN 1973
> R.A.O.C PRIMARY PACK. Which do fit the audio and control sockets on my
> Redifon GR479 station. the plugs are in very good condition (NOS) but the
> cable has started to perish and may need to be changed. These are For swaps or
> sale.
>
>
> ------------ -
>
> Hi Jeff.
>
> How much for a lead with a 6 pin plug each end ?
>
> Do think I have any of the plugs you needed, not knowing the sets though.
>
> Ben.
>

?



Re: 6 pin plugs. Larkspur

 

HI Ben,
Plugs in post
Jeff

From: "Military1944@..."
To: Racal-manpacks@...
Sent: Sun, May 30, 2010 9:37:09 AM
Subject: Re: [Racal-manpacks] Re: 6 pin plugs. Larkspur

?

Your probably quite right.
?
?
?
In a message dated 29/05/2010 18:19:22 GMT Daylight Time, spike.dennis@ writes:
Maybe some of this back-forth semi-personal traffic would best be done off list so as to save the rest of us unnecessary email clutter.

From: jeff.akines
To: Racal-manpacks@ yahoogroups. com
Sent: Sat, May 29, 2010 11:53:50 AM
Subject: [Racal-manpacks] Re: 6 pin plugs. Larkspur

?
< p>

HI Ben,
Are you saying in your message that you do or dont have what iam looking for? the cables i have only have the plug on 1 end you will need 2 to make up a lead. send me your address and i will send you a couple for the cost of the postage.
Jeff

--- In Racal-manpacks@ yahoogroups. com, Military1944@ ... wrote:
>
>
> In a message dated 29/05/2010 13:08:49 GMT Daylight Time,
> jeff.akines@ ... writes:
>
> I have a large number 0f 6 pin plugs with cable attached still in there
> original packaging labeled Z42-5995-99- 9232 CORD ASSY QTY.1 DON (CP) JAN 1973
> R.A.O.C PRIMARY PACK. Which do fit the audio and control sockets on my
> Redifon GR479 station. the plugs are in very good condition (NOS) but the
> cable has started to perish and may need to be changed. These are For swaps or
> sale.
>
>
> ------------ -
>
> Hi Jeff.
>
> How much for a lead with a 6 pin plug each end ?
>
> Do think I have any of the plugs you needed, not knowing the sets though.
>
> Ben.
>

?


Re: prc-319 DMU question

 

Thanks for that info Alain. I will add a note to that effect on the PRC319 group.

Do the DMHDs come up for sale often? I guess it is more likely now that the Clansman gear is being cleared out...

Howard
VK4BS

alain wrote:

Hello folks,

in fact EMU and DMHD use the same code. So it can works together.

The main differnce its that DMHD posses its own modem and could work

with radio able to send data.

EMU is specially created for 319: the 319 enable data by its internal modem.

Hope it help.

73

Alain


----- Original Message -----
From: "Howard Small" <howard@...>
To: <Racal-manpacks@...>
Sent: Saturday, June 05, 2010 6:50 PM
Subject: Re: [Racal-manpacks] prc-319 DMU question



Hi

I think you will find that you need the same hardware each end, i.e. a
DMHD at each end. I have no info but I suspect the DMHD is not
compatible with the EMU.

If you are interested in the PRC 319 you may wish to join the PRC319
yahoo group as there are a few files there with good info including user
handbooks and FAQs.

73

Howard
VK4BS

JC Daehler wrote:

Yes. I mean "DMHD (Data Message Handling Device)>

I only have a BCC39B, and PRC320 for now, I'm not so familiar with the
PRC139 yet.
JC
VE7OI


------------------------------------

Yahoo! Groups Links








------------------------------------

Yahoo! Groups Links
Re: prc-319 DMU question

 

Hello folks,

in fact EMU and DMHD use the same code. So it can works together.

The main differnce its that DMHD posses its own modem and could work

with radio able to send data.

EMU is specially created for 319: the 319 enable data by its internal modem.

Hope it help.

73

Alain

----- Original Message -----
From: "Howard Small" <howard@...>
To: <Racal-manpacks@...>
Sent: Saturday, June 05, 2010 6:50 PM
Subject: Re: [Racal-manpacks] prc-319 DMU question



Hi

I think you will find that you need the same hardware each end, i.e. a
DMHD at each end. I have no info but I suspect the DMHD is not
compatible with the EMU.

If you are interested in the PRC 319 you may wish to join the PRC319
yahoo group as there are a few files there with good info including user
handbooks and FAQs.

73

Howard
VK4BS

JC Daehler wrote:

Yes. I mean "DMHD (Data Message Handling Device)>

I only have a BCC39B, and PRC320 for now, I'm not so familiar with the
PRC139 yet.
JC
VE7OI


------------------------------------

Yahoo! Groups Links
Re: prc-319 DMU question

 

Hi

I think you will find that you need the same hardware each end, i.e. a DMHD at each end. I have no info but I suspect the DMHD is not compatible with the EMU.

If you are interested in the PRC 319 you may wish to join the PRC319 yahoo group as there are a few files there with good info including user handbooks and FAQs.

73

Howard
VK4BS

JC Daehler wrote:


Yes. I mean "DMHD (Data Message Handling Device)>

I only have a BCC39B, and PRC320 for now, I'm not so familiar with the PRC139 yet.
JC
VE7OI
Re: prc-319 DMU question

 

Yes. I mean "DMHD (Data Message Handling Device)>

I only have a BCC39B, and PRC320 for now, I'm not so familiar with the PRC139 yet.
JC
VE7OI
Re: prc-319 DMU question

 

Hi JC

Do you mean the DMU or DMHD (Data Message Handling Device) which connects to Audio 2 and uses X Mode?

Howard
VK4BS

JC wrote:


When using DMU to send message on the 319 HF radio, does one need the same 310 DMU unit at the receiving end in order to read ("decode")the message?
JC
VE7OI
prc-319 DMU question

 

When using DMU to send message on the 319 HF radio, does one need the same 310 DMU unit at the receiving end in order to read ("decode")the message?
JC
VE7OI
Re: PRM-4720 B

 

I am also interested in any such data

Thanks

Howard
VK4BS

johnigg wrote:


Hi group:I'm looking for service manual or schematics for PRM-4720 B transceiver
PRM-4720 B

johnigg
 

Hi group:I'm looking for service manual or schematics for PRM-4720 B transceiver
Re: 90deg mini BNC plug wanted

Michael Buckley
 

It may be helpful to know they are used on the A13 and A14 military radio - may be others, but I dont recall!

Mike B

On 02/06/2010 12:23, Military1944@... wrote:


90deg mini BNC plug wanted
Looking for a couple of the miniature BNC plugs, 90 degree type, ie
cable comes in from the side rather then inline with the plug.
If anyone has such spare, or knows of a supplier please let me know by
direct email.
Thanks, Ben.
5121 - 5140 of 6865