开云体育

Well can somebody tell me how to find it on the site? I cannot find any reference to Racal sets I have disc copies of Syncal 30M and 30X Mike M1CCF

Thanks for the info Ray it might be useful to build up a list of radios that confirm to the 2Khs offset Mike

Hi Mike, Plessey RT-PV 4300 HF manpack uses 2 khz offset. Regards Ray

HI VU2MVX You can find Syncal 30 / TRA 931 manual and diagram in WWW.MODS.DK ,section manual , section others. Good luck ! LU5EMM Daniel R. Kavaliauskas wrote:

From my limited dealings to date with the HF side of Bowman, I can't answer the question: as a result of the current debate I mentioned this when I was e-mailing an aquaintance on Op Herrick last

<M1CCF@...> wrote: Thanks chaps.The question is often asked by people using 3910 for the 1st time or think it is faulty.The new Harris 5800 must be similar too being used with Clansman.Regards Keith.

Got to be careful here, but ALL Clansman HF radio had the same offset. Syncal 30 does not Syncal 2000 does. C11SSB does as far as I remember. I believe all modern sets in the clansman period do have

They are all interoperable, it is just remembering that on 3615 it is 3617 on the dial! Mike

<michaeldani@...> wrote: Thanks Michael.Were the 320's offset ?. Stuart what say you. Regards Keith >

Probably: that would make it come right with the 2kHz IF offset on the 320 and 321, at a guess? ________________________________ Sent: Tue 19/09/2006 14:30 To: Racal-manpacks@... Subject:

Without going into details it was to allow Clansman to HAVE interoperability with other systems, and specifically Navy.

it wouldn't be Clansman interoperability by any chance?

Compatibility with other systems in service use. Mike B

I see from a previous post this has been mentioned. What was the purpose of this,data Tx ? Thanks.Keith g8ixn. Bcc39 + 3910

<mukundamoni@...> wrote: 931 model.I recently got one and am awaiting a manual before putting it to use. > VU2MVX,VENU Most of what you want for the 931 is in the FILES section. The 931 manual is

Thanks for that: can't answer your question about Bowman hf kit, as have'nt had much to do with that, although I know that it's working very well on Op Herrick: some of the Siemens compatable HF kit

Stuart Thanks for that: my applique for the 1851 would do a turn as a toasted sandwich maker, as the bias supply to the PA and driver has gone up to 6v, turning them both fully on, and giving about 5a

Dear Stuart, Can you spare me a copy of the manual for the basic Racal Syncal 931 model.I recently got one and am awaiting a manual before putting it to use. VU2MVX,VENU Stuartjmckinnon@... wrote:

Hi Barrie - you may be in luck here ! Originally these came out througha guy called Tony Sinclair who had hundreds of them in his warehouse in Royston, Herts. Tony sold the lot on to somebody about

Alan sorry forgot to add, welcome to the group, I can see quite clearly your Amateur Radio c/s at the bottom of your mail, Durrrgh Have quite a bit of racal kit in my collection, several different