开云体育

Welcome! this group is created to add information about R1CBU's code changes to the X6100. Also, questions can be posted here too.

the feature overview; https://r1cbu.ru/index.php/home/radio-software/x6100/2-x6100-de-r1cbu

https://r1cbu.ru/index.php/home/radio-software/x6100/

Hi Oleg, first i'have to say. Thanks, for this really nice Project. here some notes about my experience ... 1. it would be nice if it is also possible to save memory channels in all band secments and modes 2. rx/tx bpsk 3. rx/tx wspr 4. rx/tx some messaging app, js8cal or varachat or what else. maybe simpley winlink 5. logbook sync, for example with Ham Radio Delux over Wifi in my opinion i'see this device like a mobile (in wildernis) communication device. like get weather infos or email over winlink without pc or some tablet. Listen Radio Broadcast Station for News. finaly, where to send a donation? 73, dl8mmr, mario

I found a small bug in memory storage/recall In the first set of mem locations you can save, but not recall The second set is working ok Kind regards Jan

I cannot get hamradio deluxe to work with this configuration, under the official firmware, it connects fine using Icom and IC-7000 settings, at some point would be nice if this would work please. Thanks for all the hardwork on the R1CBU firmware, its great!

HI.....my x6100 r1cbu soft is not working with omnirig......any info with settings? 73 de Borut s50b

Is there a setting in the R1CBU firmware that allows one to toggle PTT on (TX) with a button press and off (RX) with a button press as opposed to having to hold down the PPT to TX and release to (RX)?

Got the latest v0.18. Works great, AFAICT. Is this a place where I can make a request for the software group that does this? If so, then let me explain as to what I really need. I use the x6100 (R1CBU software) exclusively to do POTA activations. When I am under a pavilion or a nice big shade tree, I have no problems. When I am in the direct sunlight, I can barely see the screen. I can kinda see the waterfall, and see what frequency I am on, but I can't see anything else at all. I start my activation doing FT8 so I am in usb-data mode. I like to get my 10-15 contacts there, and then switch to phone (usb mode). Also sometimes I like to do 40m, and likewise I can't see if I am in LSB mode. So what I would really like is the mode to be right along side (or above, or below) the frequency at the SAME font (or bigger!). So I can do the switch. I hope, I made myself clear. This 75 year old guy with minor cataract problems has a hard time sometimes. Thanks for your time, and patience! Jerry WF5W

Greetings, Thanks for all that you do, it is making the radio better to use in many ways. I tuned to simplex 146.550 and transmitted. It appeared to transmit but my other radios did not hear it. I transmitted with my other radios and received no signal on the X6100. I tuned VHF and UHF and found no signals. Is this working? If VHF/UHF can work we could maybe get APRS? Even if we have to use a Mobilinkd dongle. We could even get into WINLINK. Thanks again, Bryan KJ7PRS

Hi there! I found that with the voice announcement turned on it develops loud feedback loop through the microphone. I tried turning down all the other volume and gains to eliminate it but nothing works. If I plug in a headset, or unplug the microphone will disable the feedback. Not sure why the speaker/microphone is in feedback with the audio announcement. Interesting problem KD6AEJ CHUCK

My X6100 is tied to a XPA125B amp using the ACC cable for auto band control. When using your firmware (which is great, thanks!) the XPA125B will constantly jump between bands while transmitting. The setup auto tunes fine with stock firmware. Is there a setting related to ACC in your firmware that I am missing? It's not that big of a deal, since I can easily use the XPA125B manual mode. Thanks again for the work you've done for the X6100 community. Update: Don't think this had anything to do with R1CBU software. I stumbled on a message somewhere where somebody having a similar problem had placed separate power supplies on the X6100 and the XPA125B and it solved the problem. I did the same, and sure enough problem solved - I assume it was some sort of ground loop.

Ok. I have tried everything known to mankind, to get digital modes to work with R1CBU. It was my understanding that R1CBU was just a different GUI, on top of the radio. It is NOT. So at first I thought that flrig was at fault. So I booted up the default rig, and changed wsjtx to use IC-705 and set it up for CAT control. It worked flawlessly (via ttyACM1). So, I knew that everything was working. I rebooted into R1CBU v19. And I didn't use flrig either. So all I was using was the hamlib part of wsjtx. Same IC-705, same CAT control parameters. Nothing. So, I can only come up with the conclusion, that R1CBU doesn't work with digital modes. Too bad, I wanted it to, so bad. I like the interface. Jerry ---- Extra Ham Radio Operator: WF5W Registered Linu=x User: 275424 3D CAD designer The most exciting phrase to hear in science - the one that heralds new discoveries - is not "Eureka" but "That's funny...". - Isaac. Asimov

My cat control no longer works with v19 R1CBU. I am running on linux mint: My radio is at latest firmware revision (from Radioddity - the one that says "fix Cat") 1. I boot up as default x6100 dmesg says ttyACM0 and ttyACM1. I know that ttyACM1 is the cat control. I go into flrig, and set my transceiver to ttyACM1 and 19200. Good to go. PTT works and CAT control works just fine. I reboot after putting in v19 of R1CBU, go into flrig, and choose ttyACM1 and 19200. Nothing works, no matter how many times I try it. And I've tried 9600, 38400, and 115200. Nothing. I boot back into default. Good to go. Anyone have any ideas? Jerry ---- Extra Ham Radio Operator: WF5W Registered Linu=x User: 275424 3D CAD designer The most exciting phrase to hear in science - the one that heralds new discoveries - is not "Eureka" but "That's funny...". - Isaac. Asimov

Used this firmware for the first time today on SSB. I like it; however, when I tried to operate CW, I realized I have to add settings for my preferences; eg Iambic settings. How does one do this? Thanks, KO6WL

good evening, can someone send me the r1cbu 0.17.1 firmware please, antoniojoselop@... thank you 73 ?

good evening, can someone send me the r1cbu 0.17.1 firmware please, antoniojoselop@... thank you 73 ?

good evening, can someone send me the r1cbu 0.17.1 firmware please, antoniojoselop@... thank you 73 ?

Hi, I just upgraded to v19, and I am not able to connect to the serial port of my X6100 with this firmware in HRD ( Ham Radio Deluxe ). This works fine with factory firmware. Can someone shed a light what am I overlooking here? 73, Janos ON3JBS