开云体育

Wall mount SO-239 connectors?

Ron Watkins All Messages By This Member #214 Anyone know where to find SO-239 connectors with a wall plate mount? Im looking to install a antenna lead through the exterior wall into the house and need some sort of wall plate for the SO-239 to make it look semi-professional and not just a hole in the wall. -- Ron Watkins, AI7AK 602.743.5272
Jill & Greg delezynski Member Profile All Messages By This Member #215 Ron, Might look at Amazon if you can wait. Saw this one; I am building a Go-Box for one of my HF system and picked up this package; And these; Greg KF6ZEC Greg & Jill Delezynski S/V Guenevere Our Home Page: http://www.svguenevere.com Our YouTube page: http://www.youtube.com/user/delezynski Our videos are now digital and can be downloaded to any device from Amazon Video; On Wednesday, April 22, 2020, 3:25:39 PM MST, Ron Watkins <rwatki@...> wrote: Anyone know where to find SO-239 connectors with a wall plate mount? Im looking to install a antenna lead through the exterior wall into the house and need some sort of wall plate for the SO-239 to make it look semi-professional and not just a hole in the wall. -- Ron Watkins, AI7AK 602.743.5272
Dennis Lawrence All Messages By This Member #216 开云体育 Hello Ron, You may want to consider using the long threaded barrel connectors instead.? They work very well and no soldering on the SO-239 needed.? They come in almost any length you need.? Just put a face plate on both sides and you are good to go, and it looks professionally done. ? Dennis KF7RYX ? toggle quoted message Show quoted text From: [email protected] [mailto:[email protected]] On Behalf Of Ron Watkins Sent: Wednesday, April 22, 2020 3:25 PM To: [email protected] Subject: [QueenCreekHams] Wall mount SO-239 connectors? ? Anyone know where to find SO-239 connectors with a wall plate mount? Im looking to install a antenna lead through the exterior wall into the house and need some sort of wall plate for the SO-239 to make it look semi-professional and not just a hole in the wall. ? -- Ron Watkins, AI7AK 602.743.5272
[email protected] All Messages By This Member #217 开云体育 Ron: ??? There used to be several SO-239 type feedthrus (i.e., long barrel connectors) available from 4-8 inches. I have not seen them advertised (except EBay) in ages. ??? But here is another technique, maybe give you an idea. ??? ??? ??? A rapid search turned up this also, but only 2" long.. ??? ??? ??? Good luck. Jim, KF7E On 22-Apr-20 15:24, Ron Watkins wrote: toggle quoted message Show quoted text Anyone know where to find SO-239 connectors with a wall plate mount? Im looking to install a antenna lead through the exterior wall into the house and need some sort of wall plate for the SO-239 to make it look semi-professional and not just a hole in the wall. -- Ron Watkins, AI7AK 602.743.5272
undefined All Messages By This Member #218 Ron,? Give me a call tomorrow if you can. I may have some this in stock or in my old parts that may work for you. ? Jeff KC7HAM? 480-788-5070 toggle quoted message Show quoted text On Wed, Apr 22, 2020 at 18:53 jim_kf7e@... <jim_kf7e@...> wrote: Ron: ??? There used to be several SO-239 type feedthrus (i.e., long barrel connectors) available from 4-8 inches. I have not seen them advertised (except EBay) in ages. ??? But here is another technique, maybe give you an idea. ??? ??? ??? A rapid search turned up this also, but only 2" long.. ??? ??? ??? Good luck. Jim, KF7E On 22-Apr-20 15:24, Ron Watkins wrote: Anyone know where to find SO-239 connectors with a wall plate mount? Im looking to install a antenna lead through the exterior wall into the house and need some sort of wall plate for the SO-239 to make it look semi-professional and not just a hole in the wall. -- Ron Watkins, AI7AK 602.743.5272
Thomas Miller #219 Mine go through a piece of sewer pipe so no connector needed. Also leaves room for another cable for your next Antenna. ?I have six coax cables and a rotator cabe. ?Tower Electronics in Wisconsin sells pl259 barrels up to 12 inches long. ?No Mount needed just drill. 5/8 inch hole and put a nut on each end inside and outside. Tom K8PNW toggle quoted message Show quoted text On Wednesday, April 22, 2020, 6:25 PM, Ron Watkins <rwatki@...> wrote: Anyone know where to find SO-239 connectors with a wall plate mount? Im looking to install a antenna lead through the exterior wall into the house and need some sort of wall plate for the SO-239 to make it look semi-professional and not just a hole in the wall. -- Ron Watkins, AI7AK 602.743.5272
Ron Watkins All Messages By This Member #220 So, best recommendation?is to get a blank wall plate, drill a hole for the SO-239 and use a long barrel connector? The outside could be a junction box, it's the inside im more worried about. Needs to look good for the wife. Ron toggle quoted message Show quoted text On Thu, Apr 23, 2020 at 11:43 AM Thomas Miller via <k8pnw=[email protected]> wrote: Mine go through a piece of sewer pipe so no connector needed. Also leaves room for another cable for your next Antenna.? I have six coax cables and a rotator cabe.? Tower Electronics in Wisconsin sells pl259 barrels up to 12 inches long.? No Mount needed just drill. 5/8 inch hole and put a nut on each end inside and outside. Tom K8PNW On Wednesday, April 22, 2020, 6:25 PM, Ron Watkins <rwatki@...> wrote: Anyone know where to find SO-239 connectors with a wall plate mount? Im looking to install a antenna lead through the exterior wall into the house and need some sort of wall plate for the SO-239 to make it look semi-professional and not just a hole in the wall. -- Ron Watkins, AI7AK 602.743.5272 -- Ron Watkins, KJ7MSB 602.743.5272
Joe Sammartino All Messages By This Member #221 Yes Try not to do this: toggle quoted message Show quoted text On Thu, Apr 23, 2020 at 12:06 PM Ron Watkins <rwatki@...> wrote: So, best recommendation?is to get a blank wall plate, drill a hole for the SO-239 and use a long barrel connector? The outside could be a junction box, it's the inside im more worried about. Needs to look good for the wife. Ron On Thu, Apr 23, 2020 at 11:43 AM Thomas Miller via <k8pnw=[email protected]> wrote: Mine go through a piece of sewer pipe so no connector needed. Also leaves room for another cable for your next Antenna.? I have six coax cables and a rotator cabe.? Tower Electronics in Wisconsin sells pl259 barrels up to 12 inches long.? No Mount needed just drill. 5/8 inch hole and put a nut on each end inside and outside. Tom K8PNW On Wednesday, April 22, 2020, 6:25 PM, Ron Watkins <rwatki@...> wrote: Anyone know where to find SO-239 connectors with a wall plate mount? Im looking to install a antenna lead through the exterior wall into the house and need some sort of wall plate for the SO-239 to make it look semi-professional and not just a hole in the wall. -- Ron Watkins, AI7AK 602.743.5272 -- Ron Watkins, KJ7MSB 602.743.5272
[email protected] All Messages By This Member #222 For barrel connectors, reasonably priced, all different lengths. sent from phone ? toggle quoted message Show quoted text On Thu, Apr 23, 2020, 12:06 Ron Watkins <rwatki@...> wrote: So, best recommendation?is to get a blank wall plate, drill a hole for the SO-239 and use a long barrel connector? The outside could be a junction box, it's the inside im more worried about. Needs to look good for the wife. Ron On Thu, Apr 23, 2020 at 11:43 AM Thomas Miller via <k8pnw=[email protected]> wrote: Mine go through a piece of sewer pipe so no connector needed. Also leaves room for another cable for your next Antenna.? I have six coax cables and a rotator cabe.? Tower Electronics in Wisconsin sells pl259 barrels up to 12 inches long.? No Mount needed just drill. 5/8 inch hole and put a nut on each end inside and outside. Tom K8PNW On Wednesday, April 22, 2020, 6:25 PM, Ron Watkins <rwatki@...> wrote: Anyone know where to find SO-239 connectors with a wall plate mount? Im looking to install a antenna lead through the exterior wall into the house and need some sort of wall plate for the SO-239 to make it look semi-professional and not just a hole in the wall. -- Ron Watkins, AI7AK 602.743.5272 -- Ron Watkins, KJ7MSB 602.743.5272
[email protected] All Messages By This Member #223 开云体育 ??? Eureka, good find, Court! Jim On 24-Apr-20 06:00, court.kg7vf@... wrote: toggle quoted message Show quoted text For barrel connectors, reasonably priced, all different lengths. sent from phone ? On Thu, Apr 23, 2020, 12:06 Ron Watkins <rwatki@...> wrote: So, best recommendation?is to get a blank wall plate, drill a hole for the SO-239 and use a long barrel connector? The outside could be a junction box, it's the inside im more worried about. Needs to look good for the wife. Ron On Thu, Apr 23, 2020 at 11:43 AM Thomas Miller via <k8pnw=[email protected]> wrote: Mine go through a piece of sewer pipe so no connector needed. Also leaves room for another cable for your next Antenna.? I have six coax cables and a rotator cabe.? Tower Electronics in Wisconsin sells pl259 barrels up to 12 inches long.? No Mount needed just drill. 5/8 inch hole and put a nut on each end inside and outside. Tom K8PNW On Wednesday, April 22, 2020, 6:25 PM, Ron Watkins <rwatki@...> wrote: Anyone know where to find SO-239 connectors with a wall plate mount? Im looking to install a antenna lead through the exterior wall into the house and need some sort of wall plate for the SO-239 to make it look semi-professional and not just a hole in the wall. -- Ron Watkins, AI7AK 602.743.5272 -- Ron Watkins, KJ7MSB 602.743.5272
Ron Watkins All Messages By This Member #224 Yes, thanks. I didn't know about that website. Ron toggle quoted message Show quoted text On Fri, Apr 24, 2020 at 6:49 AM jim_kf7e@... <jim_kf7e@...> wrote: ??? Eureka, good find, Court! Jim On 24-Apr-20 06:00, court.kg7vf@... wrote: For barrel connectors, reasonably priced, all different lengths. sent from phone ? On Thu, Apr 23, 2020, 12:06 Ron Watkins <rwatki@...> wrote: So, best recommendation?is to get a blank wall plate, drill a hole for the SO-239 and use a long barrel connector? The outside could be a junction box, it's the inside im more worried about. Needs to look good for the wife. Ron On Thu, Apr 23, 2020 at 11:43 AM Thomas Miller via <k8pnw=[email protected]> wrote: Mine go through a piece of sewer pipe so no connector needed. Also leaves room for another cable for your next Antenna.? I have six coax cables and a rotator cabe.? Tower Electronics in Wisconsin sells pl259 barrels up to 12 inches long.? No Mount needed just drill. 5/8 inch hole and put a nut on each end inside and outside. Tom K8PNW On Wednesday, April 22, 2020, 6:25 PM, Ron Watkins <rwatki@...> wrote: Anyone know where to find SO-239 connectors with a wall plate mount? Im looking to install a antenna lead through the exterior wall into the house and need some sort of wall plate for the SO-239 to make it look semi-professional and not just a hole in the wall. -- Ron Watkins, AI7AK 602.743.5272 -- Ron Watkins, KJ7MSB 602.743.5272 -- Ron Watkins, KJ7MSB 602.743.5272
Thomas Miller #225 glad someone took my advice On Friday, April 24, 2020, 10:27:32 AM EDT, Ron Watkins <rwatki@...> wrote: Yes, thanks. I didn't know about that website. Ron toggle quoted message Show quoted text On Fri, Apr 24, 2020 at 6:49 AM jim_kf7e@... <jim_kf7e@...> wrote: ??? Eureka, good find, Court! Jim On 24-Apr-20 06:00, court.kg7vf@... wrote: For barrel connectors, reasonably priced, all different lengths. sent from phone ? On Thu, Apr 23, 2020, 12:06 Ron Watkins <rwatki@...> wrote: So, best recommendation?is to get a blank wall plate, drill a hole for the SO-239 and use a long barrel connector? The outside could be a junction box, it's the inside im more worried about. Needs to look good for the wife. Ron On Thu, Apr 23, 2020 at 11:43 AM Thomas Miller via <k8pnw=[email protected]> wrote: Mine go through a piece of sewer pipe so no connector needed. Also leaves room for another cable for your next Antenna.? I have six coax cables and a rotator cabe.? Tower Electronics in Wisconsin sells pl259 barrels up to 12 inches long.? No Mount needed just drill. 5/8 inch hole and put a nut on each end inside and outside. Tom K8PNW On Wednesday, April 22, 2020, 6:25 PM, Ron Watkins <rwatki@...> wrote: Anyone know where to find SO-239 connectors with a wall plate mount? Im looking to install a antenna lead through the exterior wall into the house and need some sort of wall plate for the SO-239 to make it look semi-professional and not just a hole in the wall. -- Ron Watkins, AI7AK 602.743.5272 -- Ron Watkins, KJ7MSB 602.743.5272 -- Ron Watkins, KJ7MSB 602.743.5272
Joe Sammartino All Messages By This Member #226 Tom, It's all about visuals these days. Always include a link. People will click on links all day long but usally only skim text. Thanks for your input. Joe, N2QOJ toggle quoted message Show quoted text On Fri, Apr 24, 2020, 8:09 AM Thomas Miller via <k8pnw=[email protected]> wrote: glad someone took my advice On Friday, April 24, 2020, 10:27:32 AM EDT, Ron Watkins <rwatki@...> wrote: Yes, thanks. I didn't know about that website. Ron On Fri, Apr 24, 2020 at 6:49 AM jim_kf7e@... <jim_kf7e@...> wrote: ??? Eureka, good find, Court! Jim On 24-Apr-20 06:00, court.kg7vf@... wrote: For barrel connectors, reasonably priced, all different lengths. sent from phone ? On Thu, Apr 23, 2020, 12:06 Ron Watkins <rwatki@...> wrote: So, best recommendation?is to get a blank wall plate, drill a hole for the SO-239 and use a long barrel connector? The outside could be a junction box, it's the inside im more worried about. Needs to look good for the wife. Ron On Thu, Apr 23, 2020 at 11:43 AM Thomas Miller via <k8pnw=[email protected]> wrote: Mine go through a piece of sewer pipe so no connector needed. Also leaves room for another cable for your next Antenna.? I have six coax cables and a rotator cabe.? Tower Electronics in Wisconsin sells pl259 barrels up to 12 inches long.? No Mount needed just drill. 5/8 inch hole and put a nut on each end inside and outside. Tom K8PNW On Wednesday, April 22, 2020, 6:25 PM, Ron Watkins <rwatki@...> wrote: Anyone know where to find SO-239 connectors with a wall plate mount? Im looking to install a antenna lead through the exterior wall into the house and need some sort of wall plate for the SO-239 to make it look semi-professional and not just a hole in the wall. -- Ron Watkins, AI7AK 602.743.5272 -- Ron Watkins, KJ7MSB 602.743.5272 -- Ron Watkins, KJ7MSB 602.743.5272 image.png image.png
undefined All Messages By This Member #227 开云体育 They are great people! ?I have been order from them for years. Jeff toggle quoted message Show quoted text On Apr 24, 2020, at 7:26 AM, Ron Watkins <rwatki@...> wrote: Yes, thanks. I didn't know about that website. Ron On Fri, Apr 24, 2020 at 6:49 AM jim_kf7e@... <jim_kf7e@...> wrote: ??? Eureka, good find, Court! Jim On 24-Apr-20 06:00, court.kg7vf@... wrote: For barrel connectors, reasonably priced, all different lengths. <image.png> sent from phone ? On Thu, Apr 23, 2020, 12:06 Ron Watkins <rwatki@...> wrote: So, best recommendation?is to get a blank wall plate, drill a hole for the SO-239 and use a long barrel connector? The outside could be a junction box, it's the inside im more worried about. Needs to look good for the wife. Ron On Thu, Apr 23, 2020 at 11:43 AM Thomas Miller via <k8pnw=[email protected]> wrote: Mine go through a piece of sewer pipe so no connector needed. Also leaves room for another cable for your next Antenna.? I have six coax cables and a rotator cabe.? Tower Electronics in Wisconsin sells pl259 barrels up to 12 inches long.? No Mount needed just drill. 5/8 inch hole and put a nut on each end inside and outside. Tom K8PNW On Wednesday, April 22, 2020, 6:25 PM, Ron Watkins <rwatki@...> wrote: Anyone know where to find SO-239 connectors with a wall plate mount? Im looking to install a antenna lead through the exterior wall into the house and need some sort of wall plate for the SO-239 to make it look semi-professional and not just a hole in the wall. -- Ron Watkins, AI7AK 602.743.5272 -- Ron Watkins, KJ7MSB 602.743.5272 -- Ron Watkins, KJ7MSB 602.743.5272
[email protected] All Messages By This Member #228 Tom indeed was the source of the knowledge.? All I did was look it up and snap the screenshot.? ? :-) ? toggle quoted message Show quoted text On Fri, Apr 24, 2020 at 8:15 AM Joe Sammartino <jsammartino@...> wrote: Tom, It's all about visuals these days. Always include a link. People will click on links all day long but usally only skim text. Thanks for your input. Joe, N2QOJ On Fri, Apr 24, 2020, 8:09 AM Thomas Miller via <k8pnw=[email protected]> wrote: glad someone took my advice On Friday, April 24, 2020, 10:27:32 AM EDT, Ron Watkins <rwatki@...> wrote: Yes, thanks. I didn't know about that website. Ron On Fri, Apr 24, 2020 at 6:49 AM jim_kf7e@... <jim_kf7e@...> wrote: ??? Eureka, good find, Court! Jim On 24-Apr-20 06:00, court.kg7vf@... wrote: For barrel connectors, reasonably priced, all different lengths. sent from phone ? On Thu, Apr 23, 2020, 12:06 Ron Watkins <rwatki@...> wrote: So, best recommendation?is to get a blank wall plate, drill a hole for the SO-239 and use a long barrel connector? The outside could be a junction box, it's the inside im more worried about. Needs to look good for the wife. Ron On Thu, Apr 23, 2020 at 11:43 AM Thomas Miller via <k8pnw=[email protected]> wrote: Mine go through a piece of sewer pipe so no connector needed. Also leaves room for another cable for your next Antenna.? I have six coax cables and a rotator cabe.? Tower Electronics in Wisconsin sells pl259 barrels up to 12 inches long.? No Mount needed just drill. 5/8 inch hole and put a nut on each end inside and outside. Tom K8PNW On Wednesday, April 22, 2020, 6:25 PM, Ron Watkins <rwatki@...> wrote: Anyone know where to find SO-239 connectors with a wall plate mount? Im looking to install a antenna lead through the exterior wall into the house and need some sort of wall plate for the SO-239 to make it look semi-professional and not just a hole in the wall. -- Ron Watkins, AI7AK 602.743.5272 -- Ron Watkins, KJ7MSB 602.743.5272 -- Ron Watkins, KJ7MSB 602.743.5272

Previous Topic Next Topic