¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: Local Ham Radio Article

 

GOOD article Joe!

Greg
Greg & Jill Delezynski S/V Guenevere
Our Home Page: http://www.svguenevere.com
Our YouTube page: http://www.youtube.com/user/delezynski
Our videos are now digital and can be downloaded to any device from Amazon Video;


On Friday, May 22, 2020, 1:25:57 PM MST, Joe Sammartino <jsammartino@...> wrote:


Local article regarding ham radio by me.

Joe, N2QOJ

?


Local Ham Radio Article

 

Local article regarding ham radio by me.

Joe, N2QOJ

?


Mesa R U Prepared Weekly HAM Radio Net

 

Mesa R U Prepared Weekly HAM Radio Net

Wed May 20, 2020 7pm ¨C 8pm (MST)

Ocotillo Repeater ( 449.325 MHz with a PL Tone of 100 Hz, Mesa, AZ)


You can also listen in via streaming audio at:



QCECG Net 5-17-2020 Notes

 

QCECG Net 5-17-2020 Notes

During our Sunday night net, a few resources/topics were discussed that are noted here.

1. The upcoming Arizona Red Cross Comms Drill on 5/30 was detailed in a previous email but you can also visit here for details:?

If you plan on participating - highly recommended - do not wait for last minute to visit the link. You will need to download a couple of docs and review. Download the Incident Action Plan here:

2. Remote testing seems to be gaining traction. Visit here to check out some remote sessions:



Locally: Contact Chuck Rogers, W7CBR, to get info on the next in-person session in Mesa:

Rogers_Charles@..., 602-339-0109

3. Direct to you Beef! Arizona Beef LLC is offering beef products at $3.99/lb on Thursdays, Fridays, and?Saturdays from 9 AM till 3 PM at the NW corner of the Home Depot parking lot at Power and Rittenhouse Roads. Information: Mike @ 619-500-1959

4. "Radio AT Home", Heidi, K7ZAE, announces "Radio At Home". Details:

Hello all!? I am pleased to announce a way to be "radioactive" during the hotter, summer months.

We will be holding what will be known as "Radios At Home."? It will begin this weekend, and will be held approximately once a month.? It will be just like the "Radios Under Sun Shade"/"Radios in the Park" that you may have already participated in before.? The only major difference is that you would operate in the air-conditioned comfort of your own home instead of deploying to a park or other outdoor location.? Of course, if you choose to operate mobile or portable, you may do that as well.? The only rule to participate (just as it is during RUSS/RITP) is that one must operate on off-grid power.? That is, you may operate using any source of power besides being plugged into the grid (AC power.)??

The first "Radios At Home" will be this Saturday, May 23rd, from 10:00 am to 12:00 pm.? The frequencies will also be the same as those which are used for RUSS/RITP.? We will be operating simplex on 146.460 MHz.? You may wish to use the designated PL tone of 77.0, but it is not required (but some participants may not hear you if you do not.)? For HF users, we will be planning on using LSB 7.178 MHz if that is clear.? Of course, you may operate on other frequencies or modes as you wish to make contacts.? The point of this exercise is to continue to use our skills, to make contacts, and to have fun!

Hope to hear you on the air this weekend!? - Heidi K7ZAE


5. MESN - Mesa East Stake Net - Monday nights at 8:30 PM, KF7RYX Repeater 448.225 Mhz PL 100 Hz.? Focusing on new users, beginner issues, net participation, emcomm.

All licensed amateur radio operators are welcome to join.

That's it for this week, until next time, 73,

Joe, N2QOJ


Mesa East Stake Net Tonight

 

New Net!

Mesa
East Stake Net

Monday May 18, 2020 8:30pm ¨C 9:00pm (MST)

KF7RYX Repeater ( 448.225 MHz with a PL Tone of 100, Mesa, AZ)

Focusing on new users, beginner issues, and net participation.

All licensed amateur radio operators are welcome to join.


Radios At Home this Saturday

 

From Heidi, K7ZAE

---------- Forwarded message ------------------------

Hello all!

I am pleased to announce a way to be "radioactive" during the hotter, summer months.

We will be holding what will be known as "Radios At Home."? It will begin this weekend, and will be held approximately once a month.? It will be just like the "Radios Under Sun Shade"/"Radios in the Park" that you may have already participated in before.? The only major difference is that you would operate in the air-conditioned comfort of your own home instead of deploying to a park or other outdoor location.? Of course, if you choose to operate mobile or portable, you may do that as well.? The only rule to participate (just as it is during RUSS/RITP) is that one must operate on off-grid power.? That is, you may operate using any source of power besides being plugged into the grid (AC power.)??

The first "Radios At Home" will be this Saturday, May 23rd, from 10:00 am to 12:00 pm.? The frequencies will also be the same as those which are used for RUSS/RITP.? We will be operating simplex on 146.460 MHz.? You may wish to use the designated PL tone of 77.0, but it is not required (but some participants may not hear you if you do not.)? For HF users, we will be planning on using LSB 7.178 MHz if that is clear.? Of course, you may operate on other frequencies or modes as you wish to make contacts.? The point of this exercise is to continue to use our skills, to make contacts, and to have fun!

Hope to hear you on the air this weekend!

- Heidi K7ZAE


Twitter, Facebook, YouTube, Groups.io and More

 

Here are some links to several social media instances of our local ham community (and then some).

Twitter:

Follow the Queen Creek Amateur Radio Club via Twitter at -?

Follow the Queen Creek Emergency Communications Group via Twitter at -?

Elmer: Here's a quick video from TechBoomers on the basics of using Twitter:

Facebook:

Queen Creek Amateur Radio Club Facebook Page -

East Valley Amateur Radio Facebook Group -

East Valley QRP Group -

Elmer: Facebook Page or Group? What's the difference?

A Facebook Page is not very interactive. It is a primarily an information page of a business or organization for the purpose of providing a single point of reference where the owner/administrator can push out notifications. A visitor to this page can "Like" the page and post comments to a notification, if allowed.

A Facebook Group is completely interactive. Once you "join" such a group, you can post topics, events, etc. just as the owner/administrator can. However, the group owner/administrator can impose limitations and restrictions plus manage/moderate members' activities as needed. This is the type of Facebook presence that will allow maximum member participation, contributions, and discussion threads.


YouTube:

Queen Creek Amateur Radio Club -

Dennis, KF7RYX -

Fair Lawn Amateur Radio Club (Excellent Presentations and Guest Speakers) -

Dave Tadlock (KG0ZZ) - Well Known DIY Antenna Guru -

K7AGE - Probably the Best Known Ham Radio Videocaster -


Web Sites:

Queen Creek Amateur Radio Club -

Queen Creek Emergency Communications Group -

Aaron's Excellent Digital Modes Website -

Chandler Ham Radio Club -

Superstition Amateur Radio Club -

N1AV's informative Web Page -

Well Known Supplier of APRS and Transmitter Hunting Products -

Mesa RU Prepared - For those interested in being prepared -


Local Podcaster:

Mike, K7ZMM - An Eclectic Discussion of Tech, Ham Radio, Camping, Hunting -


Groups.io, Google Groups, or Similar:

Queen Creek Hams - /g/QueenCreekHams

Gathering of the Willing - /g/GOTW

Support Group For Byonic's APRS and Transmitter Hunting Products - /g/TinyTrak

The Local Transmitter Hunting Support Group in the Phoenix Valley -


If you have suggestions for additions to this list, please send them to me by direct email at jsammartino@....

Regards, Joe, N2QOJ


QCECG weekly training net - 5/17/2020 @ 8 PM (2000)

 

QCECG weekly training net - 5/17/2020 @ 8 PM (2000)

Please join us.?

Charge your HT, mobile, or base radio and join us Sunday evening.

QCECG weekly training net - 5/17/2020 @ 8 PM (2000)

Check in and let us know how your are doing.

8 pm at 449.325 Mhz PL 100.0 Hz. - Visitors welcome!

Listen over the Internet at

Regards, Joe, N2QOJ


Re: [arizonaham] International Space Station Visible Saturday Evening

 

Just follow the link to get info.


On Sat, May 16, 2020, 10:59 AM Kurt von Rice drbones62@... [arizonaham] <arizonaham@...> wrote:


The chart didn't come through

Get
On May 16, 2020, at 09:15, "Joe Sammartino jsammartino@... [arizonaham]" <arizonaham@...> wrote:
?

International Space Station Visible Saturday Evening

Folks - Good news!

Another great opportunity to spot the International Space Station this
evening as it passes over our area in Arizona.

It should be a great pass and hopefully the clouds will be minimal.

Treat your family and friends to a viewing of the International Space
Station tonight. I find that even the most non technical family member or
friend get a kick out of seeing the station as it moves across the sky at
17,150 MPH - that's 4.76 miles per second - and about 250 miles above us.

If you are an amateur radio operator, take the opportunity to relate how us
hams can communicate directly with the ISS or through one of its
transponders.

The ISS will be visible for 6 minutes and should be a good viewing and
becomes visible directly from the West Southwest and disappears toward
Northeast.

Time: Sat May 16 8:08 PM
Visible: 6 min
Max Height: 72¡ã
Appears: 11¡ã above SW (from 225 degrees)
Disappears: 11¡ã above NE (toward 45 degrees)

I've also attached an illustration that will help you determine how to use
this information. You can watch and track the station in advance at this
link:


<>

And, something new! I've attached a chart of the actual pass.

Remember, these times are based on a viewing site from the Mesa area (and
within 50 miles). If you would like to generate times from your specific
city or town, visit the link and follow the instructions.

If your specific city or town isn¡¯t listed, pick the closest one. The space
station is visible for at least a 50 mile (80 km) radius around each of the
listed locations.

If you are an amateur radio operator, listen in (or work) on these
frequencies:

Voice and SSTV Downlink: 145.80 (Worldwide)

Voice Uplink: 144.49 for ITU Regions 2 and 3

VHF Packet Uplink and Downlink: 145.825 (Worldwide) - easiest to hear

UHF Packet Uplink and Downlink: 437.550

UHF/VHF Repeater Uplink: 437.800

UHF/VHF Repeater Downlink: 145.800

Regards, Joe N2QOJ

[Non-text portions of this message have been removed]



__._,_.___

Posted by: Kurt von Rice <drbones62@...>


? ? Unsubscribe ?

__,_._,___


International Space Station Visible Saturday Evening

 

International Space Station Visible Saturday Evening


Folks - Good news!

Another great opportunity to spot the International Space Station this evening as it passes over our area in Arizona.

It should be a great pass and hopefully the clouds will be minimal.

Treat your family and friends to a viewing of the International Space Station tonight. I find that even the most non technical family member or friend get a kick out of seeing the station as it moves across the sky at 17,150 MPH - that's 4.76 miles per second - and about 250 miles above us.

If you are an amateur radio operator, take the opportunity to relate how us hams can communicate directly with the ISS or through one of its transponders.

The ISS will be visible for 6 minutes and should be a good viewing and becomes visible directly from the West Southwest and disappears toward Northeast.

Time: Sat May 16 8:08 PM
Visible: 6 min
Max Height: 72¡ã
Appears: 11¡ã above SW (from 225 degrees)
Disappears: 11¡ã above NE (toward 45 degrees)

I've also attached an illustration that will help you determine how to use this information. You can watch and track the station in advance at this link:


And, something new! I've attached a chart of the actual pass.

Remember, these times are based on a viewing site from the Mesa area (and within 50 miles). If you would like to generate times from your specific city or town, visit the link and follow the instructions.

If your specific city or town isn¡¯t listed, pick the closest one. The space station is visible for at least a 50 mile (80 km) radius around each of the listed locations.

If you are an amateur radio operator, listen in (or work) on these frequencies:

Voice and SSTV Downlink: 145.80 (Worldwide)

Voice Uplink: 144.49 for ITU Regions 2 and 3

VHF Packet Uplink and Downlink: 145.825 (Worldwide) - easiest to hear

UHF Packet Uplink and Downlink: 437.550

UHF/VHF Repeater Uplink: 437.800

UHF/VHF Repeater Downlink: 145.800

Regards, Joe N2QOJ


New ARRL Podcast - The Eclectic Tech - Episode 5

 

New ARRL Podcast - The Eclectic Tech - Episode 5

The ARRL began a new podcast and it is hosted by Steve Ford, WB8IMY.

The Eclectic Tech podcast brings news, interviews, and commentary about technology and science -- all with an amateur radio twist.

This fifth episode has the following topics: A?new distance record at 122 GHz, digital meteor scatter; and wireless power transfer technology.

Stream:

As always, feedback is welcome.

Regards, Joe, N2QOJ


International Space Station Visible Tonight

 

International Space Station Visible Tonight Folks -?Good news! Another opportunity to?spot?the International Space?Station?this evening as it passes over our area (East Valley) in Arizona. It should be a good pass and hopefully the clouds will be minimal. Treat your family and friends to a viewing of the International Space?Station?tonight. I find that even the most non technical family member or friend get a kick out of seeing the?station?as it moves across the sky at 17,150?MPH?- that's 4.76 miles per second - and about 250 miles above us. If you are an amateur radio operator, take the opportunity to relate how us hams can communicate directly with the ISS or through one of its transponders. The ISS will be visible for 6 minutes and should be a great viewing and becomes visible directly from the West Southwest and disappears toward Northeast.


Time: Fri May 15 8:56 PM
Visible: 6 min
Max Height: 56¡ã
Appears: 10¡ã above WSW (from 248 degrees)
Disappears: 11¡ã above NE (toward 45 degrees)

I've also attached an illustration that will help you determine how to use this information. You can watch and track the?station?in advance at this link:



And, something new! I've attached a chart of the actual pass. Remember, these times are based on a viewing site from the?Mesa?area (and within 50 miles). If you would like to generate times from your specific city or town, visit the link and follow the instructions. If your specific city or town isn¡¯t listed, pick the closest one. The space?station?is visible for at least a 50 mile (80 km) radius around each of the listed locations. If you are an amateur radio operator, listen in (or work) on these frequencies: Voice and SSTV Downlink: 145.80 (Worldwide) Voice Uplink: 144.49 for ITU Regions 2 and 3 VHF Packet Uplink and Downlink: 145.825 (Worldwide) - easiest to hear UHF Packet Uplink and Downlink: 437.550 UHF/VHF Repeater Uplink: 437.80 UHF/VHF Repeater Downlink: 145.80 Regards, Joe N2QOJ


Mesa R U Prepared Weekly HAM Radio Net

 

Mesa R U Prepared Weekly HAM Radio Net


Wed May 13, 2020 7pm ¨C 7:30pm (MST)

Ocotillo Repeater ( 449.325 MHz with a PL Tone of 100, Mesa, AZ)



You can also listen in via streaming audio at:




Re: Looking for Antenna advice

 

¿ªÔÆÌåÓý

Oilfield pipe is going to be CRAZY heavy and way overkill for what you need.? I still believe the fence top rail is the cheapest, easiest, best option you have.

Dennis

?

From: [email protected] [mailto:[email protected]] On Behalf Of Ron Watkins
Sent: Tuesday, May 12, 2020 11:38 PM
To: [email protected]
Subject: Re: [QueenCreekHams] Looking for Antenna advice

?

Found this, wondering if metal is ok to use with an antenna?

??

?

On Tue, May 12, 2020 at 8:31 AM Dennis Lawrence <kf7ryx@...> wrote:

Ron, you have several options, depending on how high you need it.? A very simple and easy mast is the Harbor Freight flag pole.? It is 20¡¯ tall and telescopes down to about 5¡¯.? Very sturdy and works well¡­easy to put up and take down.? Cost is about $50-60 depending on the discount coupon you can get in the mail.

?

Another option is a telescoping TV antenna mast.? There is a large selection on Amazon and Ebay.? Lengths come in pretty much whatever you need.? I saw some that were over 40 feet.

?

And there are always the Military poles so many people use.? 4¡¯ long and you just add as many as you need.? Again, they are available on Ebay and Amazon.

?

Hope this helps.

Dennis

?

From: [email protected] [mailto:[email protected]] On Behalf Of Ron Watkins
Sent: Tuesday, May 12, 2020 8:07 AM
To: [email protected]
Subject: Re: [QueenCreekHams] Looking for Antenna advice

?

Can you point me to a suitable mast? I have seen Dave Casler's one made from fence top rail, is that the best option? It would barely clear the top of the roof, making me think it would still drape over the roof itself. Im assuming?that is a bad condition to have.

Ron

?

On Tue, May 12, 2020 at 7:54 AM Dennis Lawrence <kf7ryx@...> wrote:

The most simple solution is to use a different mast.? It is obvious that the mast you are using is not suited for the weight of the antenna.

Dennis

KF7RYX

?

From: [email protected] [mailto:[email protected]] On Behalf Of Ron Watkins
Sent: Tuesday, May 12, 2020 6:57 AM
To: [email protected]
Subject: [QueenCreekHams] Looking for Antenna advice

?

Im trying?to put up an antenna and having issues as shown in the attached picture. Basically, I cannot get the antenna up because the spiderpole is just bending over and causing the antenna to drape over the roof instead of being elevated. If I apply enough force to raise the antenna off the roof, the pole bends over far enough to touch the roof itself. Please provide some advise?how to resolve this issue.

?

--

Ron Watkins
602.743.5272


?

--

Ron Watkins
602.743.5272


?

--

Ron Watkins, AI7AK
602.743.5272


Re: Looking for Antenna advice

 

¿ªÔÆÌåÓý

Some chain link fence end / corner post are bigger and the line posts will slide in and can be through bolted. ?Got a stronger base. ?But you would need to shim the top rail in the line post to fern it up.?
?I have dune this it¡¯s. One way it worked, I have dune the H.F. Flag pole and liked it as well.?

?
Jim ?Millyard 480 296 3898

MAKE IT A NICE DAY.?

On May 12, 2020, at 11:38 PM, Ron Watkins <rwatki@...> wrote:

?
Found this, wondering if metal is ok to use with an antenna?
??

On Tue, May 12, 2020 at 8:31 AM Dennis Lawrence <kf7ryx@...> wrote:

Ron, you have several options, depending on how high you need it.? A very simple and easy mast is the Harbor Freight flag pole.? It is 20¡¯ tall and telescopes down to about 5¡¯.? Very sturdy and works well¡­easy to put up and take down.? Cost is about $50-60 depending on the discount coupon you can get in the mail.

?

Another option is a telescoping TV antenna mast.? There is a large selection on Amazon and Ebay.? Lengths come in pretty much whatever you need.? I saw some that were over 40 feet.

?

And there are always the Military poles so many people use.? 4¡¯ long and you just add as many as you need.? Again, they are available on Ebay and Amazon.

?

Hope this helps.

Dennis

?

From: [email protected] [mailto:[email protected]] On Behalf Of Ron Watkins
Sent: Tuesday, May 12, 2020 8:07 AM
To: [email protected]
Subject: Re: [QueenCreekHams] Looking for Antenna advice

?

Can you point me to a suitable mast? I have seen Dave Casler's one made from fence top rail, is that the best option? It would barely clear the top of the roof, making me think it would still drape over the roof itself. Im assuming?that is a bad condition to have.

Ron

?

On Tue, May 12, 2020 at 7:54 AM Dennis Lawrence <kf7ryx@...> wrote:

The most simple solution is to use a different mast.? It is obvious that the mast you are using is not suited for the weight of the antenna.

Dennis

KF7RYX

?

From: [email protected] [mailto:[email protected]] On Behalf Of Ron Watkins
Sent: Tuesday, May 12, 2020 6:57 AM
To: [email protected]
Subject: [QueenCreekHams] Looking for Antenna advice

?

Im trying?to put up an antenna and having issues as shown in the attached picture. Basically, I cannot get the antenna up because the spiderpole is just bending over and causing the antenna to drape over the roof instead of being elevated. If I apply enough force to raise the antenna off the roof, the pole bends over far enough to touch the roof itself. Please provide some advise?how to resolve this issue.

?

--

Ron Watkins
602.743.5272


?

--

Ron Watkins
602.743.5272



--
Ron Watkins, AI7AK
602.743.5272


Re: Looking for Antenna advice

 

¿ªÔÆÌåÓý

Hi Ron,

Sorry, I¡¯m not qualified to answer that for your particular application. However, if someone who is says that it would be OK, then I think you could find something locally, maybe somewhere like Davis Salvage.

It may be that top rails could work fine, depending on the lateral forces applied to the mast and maybe with stiffening or guy support of the joints. Transporting a few 10¡¯ joints would surely be easier than one 25 or 30 footer.

73 de Dennis KD7CAC
Scottsdale, AZ


On May 12, 2020, at 11:37 PM, Ron Watkins <rwatki@...> wrote:

Found this, wondering if metal is ok to use with an antenna?
_._,_._,_


Re: Looking for Antenna advice

 

Found this, wondering if metal is ok to use with an antenna?
??


On Tue, May 12, 2020 at 8:31 AM Dennis Lawrence <kf7ryx@...> wrote:

Ron, you have several options, depending on how high you need it.? A very simple and easy mast is the Harbor Freight flag pole.? It is 20¡¯ tall and telescopes down to about 5¡¯.? Very sturdy and works well¡­easy to put up and take down.? Cost is about $50-60 depending on the discount coupon you can get in the mail.

?

Another option is a telescoping TV antenna mast.? There is a large selection on Amazon and Ebay.? Lengths come in pretty much whatever you need.? I saw some that were over 40 feet.

?

And there are always the Military poles so many people use.? 4¡¯ long and you just add as many as you need.? Again, they are available on Ebay and Amazon.

?

Hope this helps.

Dennis

?

From: [email protected] [mailto:[email protected]] On Behalf Of Ron Watkins
Sent: Tuesday, May 12, 2020 8:07 AM
To: [email protected]
Subject: Re: [QueenCreekHams] Looking for Antenna advice

?

Can you point me to a suitable mast? I have seen Dave Casler's one made from fence top rail, is that the best option? It would barely clear the top of the roof, making me think it would still drape over the roof itself. Im assuming?that is a bad condition to have.

Ron

?

On Tue, May 12, 2020 at 7:54 AM Dennis Lawrence <kf7ryx@...> wrote:

The most simple solution is to use a different mast.? It is obvious that the mast you are using is not suited for the weight of the antenna.

Dennis

KF7RYX

?

From: [email protected] [mailto:[email protected]] On Behalf Of Ron Watkins
Sent: Tuesday, May 12, 2020 6:57 AM
To: [email protected]
Subject: [QueenCreekHams] Looking for Antenna advice

?

Im trying?to put up an antenna and having issues as shown in the attached picture. Basically, I cannot get the antenna up because the spiderpole is just bending over and causing the antenna to drape over the roof instead of being elevated. If I apply enough force to raise the antenna off the roof, the pole bends over far enough to touch the roof itself. Please provide some advise?how to resolve this issue.

?

--

Ron Watkins
602.743.5272


?

--

Ron Watkins
602.743.5272



--
Ron Watkins, AI7AK
602.743.5272


QCECG Net 5-10-2020 Notes

 

QCECG Net 5-10-2020 Notes

During our Sunday night net, a few resources were discussed.

1. The upcoming Arizona Red Cross Comms Drill on 5/30 was detailed in a previous email but you can also visit here for details:?

If you plan on participating - highly recommended - do not wait for last minute to visit the link. You will need to download a couple of docs and review. Download the Incident Action Plan here:

2. If you need a quick, free, and easy to use service for an audio recording or interview session with one or more parties, then visit .? Important: You need to use Chrome as your browser. Works on Android devices too. They are working on iOS functionality.

3. Let's play with an easy to use and free circuit simulator:

4. Greg, KF6ZEC, and his wife, Jill, have a great web page highlighting his sailing adventures and tips for mariners:

S/V Guenevere
Home Page:
YouTube page:
Our videos are now digital and can be downloaded to any device from Amazon Video;


5. Don't forget to check out the ARRL's newest podcast, "The Eclectic Tech", presented by Steve Ford, WB8IMY.



6. Need a reviews on new and classic portable radio? Check out Todderbert on Youtube:

That's it for this week, until next time, 73,

Joe, N2QOJ


Moderation Details

 

Every Group member is moderated for their first message.?

There is no moderation after the first message.

Joe, N2QOJ


Re: Looking for Antenna advice

 

I could put a 1/4 bolt through the joint, that should prevent it from being loose?
Ron

On Tue, May 12, 2020 at 12:42 PM AzEagleEye <kd7cac@...> wrote:
FWIW, I sent my reply below a few minutes before I saw RYX Dennis¡¯ second reply to Ron earlier this AM. Maybe I¡¯m on moderation, since my reply didn¡¯t show up shortly after sending it???

Also FWIW, chain link fence top rail tube joints aren¡¯t a particularly snug?fit-up, so using some JB Weld in the joints, splinting them externally or guying at the two joints might be wise.

73 de Dennis KD7CAC
Scottsdale, AZ


On May 12, 2020, at 8:29 AM, AzEagleEye via <kd7cac@...> wrote:

Hi Ron,

I bought a 20¡¯ joint of 2.25¡± OD CRS from this outfit years ago when they were in Tempe. They will deliver & the total cost was reasonable.


73 de Dennis KD7CAC
Scottsdale, AZ


On May 12, 2020, at 8:07 AM, Ron Watkins <rwatki@...> wrote:

Can you point me to a suitable mast? I have seen Dave Casler's one made from fence top rail, is that the best option? It would barely clear the top of the roof, making me think it would still drape over the roof itself. Im assuming?that is a bad condition to have.
Ron

On Tue, May 12, 2020 at 7:54 AM Dennis Lawrence <kf7ryx@...> wrote:

The most simple solution is to use a different mast.? It is obvious that the mast you are using is not suited for the weight of the antenna.

Dennis

KF7RYX

?

From: [email protected] [mailto:[email protected]] On Behalf Of Ron Watkins
Sent: Tuesday, May 12, 2020 6:57 AM
To: [email protected]
Subject: [QueenCreekHams] Looking for Antenna advice

?

Im trying?to put up an antenna and having issues as shown in the attached picture. Basically, I cannot get the antenna up because the spiderpole is just bending over and causing the antenna to drape over the roof instead of being elevated. If I apply enough force to raise the antenna off the roof, the pole bends over far enough to touch the roof itself. Please provide some advise?how to resolve this issue.

?

--

Ron Watkins
602.743.5272




--
Ron Watkins, AI7AK
602.743.5272