QuadTonerProfiler-Pro quit unespectedly while opening measurement data text file.
I'm including the measurement TXT file that I got from the i1Profiler app and i1PRO3 after meassuring the printed inkseparation10.tif. Loading this file crashes QuadTonerProfiler-Pro.
After printing inkseparation10.tif with PrintTool,? 21 columns and 10 rows (one for each ink) were measured with the i1Profiler, and saved as requested. That file makes tQuadTonerProfiler-Pro quit with an error.
But if I measure only black and gray rows, without color inks an M0 scan with 21 columns and 4 rows can be opened in QuadTonerProfiler-Pro without a crash.
In QuadTonerProfiler-Pro underCustom Profile Creator/Custom Curve Ceation after selecting the P900 from the dropdown menu all 10 inks show up with correct names. So whats the point to have 10 ink option when the interface only supports eight ink slots.
Shall I measure 8 inks only to get a file 21 colums by 8 rows? And if so, which 2 inks shall I leave out?
Thank you for your help!
Ernesto Morales

This is a case of not reading the manual.?

You can't load a measurement file with a mix of color and gray inks because it is going to try to make a single grayscale curve (because it is only using the L* ramp of each ink for the crossover points).

the partitioning needs to be done separately from 4 sets of measurement files for the K-Lk-LLk, C-Lc, M-Lm, and Y inks (assuming the normal k3 ink set and not a custom or duotone inkset).

Also the ink ramps need to be read in order for darkest ink to lightest, and from 0-100 ink load (or paper white to darkest patch for each row)

Hope that helps,?

Richard Boutwell

?

http://www.richardboutwell.com/

http://www.bwmastery.com/

开云体育

Richard,