开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. QuadToneRIP
  2. Topics

Can not change the drying time on my Epson 7800

 

Hello,
?
I have a problem that is not directly QTR related but there is probably someone who would have an idea about it here.
?
I need to increase the drying time between each pass for a specific projet that I print on a Stylus Pro 7800. I have a custom paper created, all settings are responding, like Platen Gap, but the Drying Time doesn't. Whatever the value I enter, it looks like the printer doesn't react and keep a drying time of 0s.
?
It is the case when I print with QTR. I also tried with the Epson driver, both on the printer panel or in the driver setting, increasing the drying time has no effect.
?
Has anyone an idea about what could be the cause of this?
?
Thanks
 

开云体育

could it be that your increased drying time needs to be longer? When the increased drying time is less than what it takes to make one pass, you will not see any difference, as far as I know

On 9. Nov 2024, at 13:46, tooko via groups.io <tooko.took@...> wrote:

Hello,
?
I have a problem that is not directly QTR related but there is probably someone who would have an idea about it here.
?
I need to increase the drying time between each pass for a specific projet that I print on a Stylus Pro 7800. I have a custom paper created, all settings are responding, like Platen Gap, but the Drying Time doesn't. Whatever the value I enter, it looks like the printer doesn't react and keep a drying time of 0s.
?
It is the case when I print with QTR. I also tried with the Epson driver, both on the printer panel or in the driver setting, increasing the drying time has no effect.
?
Has anyone an idea about what could be the cause of this?
?
Thanks
 

Thanks for the idea,
?
It's not how I understood this value. I think I tried with a value of 1s. I will give a try with an higher time
 

Translator
?
?
?
?
?
That did the trick ! Thanks a lot ;)

1 - 4 of 4