开云体育

P800 Issue

Larry Huhn All Messages By This Member #19032 Thanks to some help on another forum I resolved my printer connection issue yesterday. ?I was able to print fine for the rest of the day but then today a new issue cropped up. I tried to print using Print Tool and when I select the print command the printer feeds the material and then just runs it all the way through with no image. This is Mac OS 14 and a P800 printer. This is a new issue to me and my searches here do not come up with a result. ?I have tried reloading Print Tool, rebooting the Mac and the printer, trying different material (paper). ? Any ideas?
Clay Harmon All Messages By This Member #19033 开云体育 When that happens to me when printing a DTP plate, it typically is resolved by making a new carrier. I am surprised that the same thing happened when you print on a different paper. The next thing I would try is printing a nozzle check on some copier paper to make sure it it isn’t a nozzle issue.? Clay toggle quoted message Show quoted text On Jul 28, 2024, at 4:20?PM, Larry Huhn via groups.io <lehuhn@...> wrote: Thanks to some help on another forum I resolved my printer connection issue yesterday. ?I was able to print fine for the rest of the day but then today a new issue cropped up. I tried to print using Print Tool and when I select the print command the printer feeds the material and then just runs it all the way through with no image. This is Mac OS 14 and a P800 printer. This is a new issue to me and my searches here do not come up with a result. ?I have tried reloading Print Tool, rebooting the Mac and the printer, trying different material (paper). ? Any ideas?
Allan Greenier All Messages By This Member #19034 开云体育 When my P900 needs a nozzle check or head clean, the only way it tells me is by running the sheet through the printer without printing anything. toggle quoted message Show quoted text On Jul 28, 2024, at 4:20?PM, Larry Huhn via groups.io <lehuhn@...> wrote: Thanks to some help on another forum I resolved my printer connection issue yesterday. ?I was able to print fine for the rest of the day but then today a new issue cropped up. I tried to print using Print Tool and when I select the print command the printer feeds the material and then just runs it all the way through with no image. This is Mac OS 14 and a P800 printer. This is a new issue to me and my searches here do not come up with a result. ?I have tried reloading Print Tool, rebooting the Mac and the printer, trying different material (paper). ? Any ideas?
Larry Huhn All Messages By This Member #19035 Allan, thanks. ? I do a nozzle check before every print session. No problem there.?
Larry Huhn All Messages By This Member #19036 Hi Clay, I have had it happen printing DTP but never printing negatives using Pictorico. I did a nozzle check as always and no issue there. ?It happens with plain paper as well.
Larry Huhn All Messages By This Member #19038 This morning I deleted and reinstalled QTR and Print Tool and tried printing again with Print Tool with the same result, the film (and paper) feed and then get ejected. ?Then I tried printing through Photoshop using QTR and It did the same thing. I finally tried printing through Photoshop without QTR and it worked fine. So, my conclusion at this point is that it is not a printer issue, but a QTR issue.? ? I have never had an issue like this before and suspect it is a compatibility issue between QTR and Mac OS14. Thoughts??
Berel Lutsky Member Profile All Messages By This Member #19039 I had the same problem last week printing multiple DTP plates using a carrier - 3880, QTR,Print Tool,? - I resolved? it? by? closing? the? front? feed tray after each print, and re-opening it when prompted? to after clicking on print.? I have absolutely no idea why this works? - but it does .? Worth a try before ant more drastic solutions. ? Berel Lutsky
Larry Huhn All Messages By This Member #19044 Edited Berel, thanks but I am not using the front feed tray. I am printing negatives using Pictorico and the sheet feed.

Previous Topic Next Topic