开云体育

Hi, New to the forum. I would normally post this over on the Piezography forum but it's down at the moment and I imagine plenty of you over here will have experience of piezography. Plus I'd thought

Why would I rely on Epson to answer a question regarding QTR?

You should direct your question to Epson.

Will the latest Epson 17" P5370 be supported or can be treated as a P900? Reading Epson marketing material and other sources the P5370 has the same ink channels and printhead.

Thanks for this Richard. I have also read most of the documentation you have available, and watched your videos, and can appreciate the important advances that your apps provide at the very least to

All of these questions are why I initially started writing my huge "How to QTR" book back in 2014. I realized all the ways where the ink descriptor file and curve creation steps could be improved and

Thanks again Eben, this is very helpful indeed. I'll keep plodding along....

Here’s how I (used to) use it when I was hand-writing profiles. This is based on old, perhaps incorrect, knowledge, so if I’ve got it wrong (a) forgive me, and (b) feel free to set me

Thanks Clay!? I'll have a look....

If you are determined to use the ink descriptor file approach, I strongly recommend you download the pdf here: https://chainick.github.io/qidf-spec/? Quad Ink Descriptor File Format

Thanks for your reply Eben. Regarding bwmastery, I have read his documentation too. Not sure I want to spend more money, as QTR should be be able to get me where I want to be (maybe not if I don't get

By far the easiest route to doing this is the software by Richard Boutwell at bwmastery.com. He also has a good guide to the descriptor file. The K limit is the important one; it determines the

Recently, I've become interested in inkjet printing on non-coated papers and my research led back to QTR. I use the Mac version with an Epson P-800, and the OEM inkset. I've read everything I could

Thanks for sharing this! I’ll be waiting for this to happen in our lab. And now I’ll be ready! christinazanderson@...> wrote:

Dear List, This may be useful to only a few of you because most of you don’t work on School lab printers as I do which have tightened security and admin permission set up. I do have admin permission

V/MK channel settings are the same with OR/GR inks as the QTR changelog says. That would be Violet: R255 / B127 MK: R255/ B191 The G channel is ink quantity. 0 for 0%, 255 for 100%. -- Kang-Wei

To all; ? It turns out that the mk-limit target for setting the ink limit is not accurate for the P-900.? The attached file is from Clay Harmon who has given permission to share it here:? See the

Congratulations Tim! Warmest regards -Walker

I am getting an early start to Houston FotoFest 2024 with my exhibition, Beyond My Lens , at the Jung Center Gallery, 5200 Montrose Blvd., Houston, TX 77006, February 17 - March 29. ?I will be giving

Hi everyone - I don't have either of these Epsons at the moment. Sorry! If I hear of anyone else in the SF Bay Area I'll let you know.