开云体育

Hi Joe, I am joining this thread because I am having the same issue. I have my platen gap set to 4.5 and my dry time set to .5 through the epson media installer as others suggest, but still with no

Berel, thanks but I am not using the front feed tray. I am printing negatives using Pictorico and the sheet feed.

Hi Stig, thanks for your feedback. There is another line further down which seems to have light pizza marks. I have circled the lines in red.? I am using a box of plates that was given to me by a

Hi Joe - which kind of polymerplates are you using (Brand?)? If you only have one (Thats what I can see from your photo) broad soft white stripe, it is probably not pizza wheeling. all the

Hi all. Maybe you can shed some light on this. I have just installed an Epson P900 to print on photo paper and also to produce my own DTP photogravures. Up till now I had my plates made for me in

I had the same problem last week printing multiple DTP plates using a carrier - 3880, QTR,Print Tool,? - I resolved? it? by? closing? the? front? feed tray after each print, and re-opening it

This morning I deleted and reinstalled QTR and Print Tool and tried printing again with Print Tool with the same result, the film (and paper) feed and then get ejected. ?Then I tried printing through

Print Tool doesn't save the last setting or load a custom setting on the Quad P800UC. It does work on all my Piezo printers.

Hi Clay, I have had it happen printing DTP but never printing negatives using Pictorico. I did a nozzle check as always and no issue there. ?It happens with plain paper as well.

Allan, thanks. ? I do a nozzle check before every print session. No problem there.

When my P900 needs a nozzle check or head clean, the only way it tells me is by running the sheet through the printer without printing anything.

When that happens to me when printing a DTP plate, it typically is resolved by making a new carrier. I am surprised that the same thing happened when you print on a different paper. The next thing I

Thanks to some help on another forum I resolved my printer connection issue yesterday. ?I was able to print fine for the rest of the day but then today a new issue cropped up. I tried to print using

Hi all As already indicated my main interest is DTP photopolymer printing on my Epson P900. I have purchased and installed the K3 QuadTone Profiler and the Print Tool, following Richard Boutwell's

Joe, Well not much more I can say at this point, If you have loaded the media file into the printer with the epson software ( you should be able to see it in the printer menu set up), and can't see

Thank you Dave. So kind. My passion. And printmaking was always something I aspired to since art school and college. I was sourcing my ready made plates from Spain but now dying to produce my own.

Thanks again Greg. Will check it out tomorrow morning. Best Joe Joseph P Smith MFA Digital Arts (Melit) MSWPP; FMPA; FBIPP; Hon. FMPS; ARPS; AFIAP Instagram: @smithfoto59 Facebook:

Check out this video. He does a good job explaining it: https://youtu.be/0DH1YtqjD-U

Joe, I assume the media file you created, includes the paper thickness, platten gap and a matte icc profile were included. Attached is a copy of the media file the file I am using When I loaded

Thanks Dave. I did create a plate profile using the media installer and adjusted the platen gap accordingly but I can only see this profile in the Epson printer dialog and not in the QTR dialog. I