开云体育

Blayne Puklich <blayne@...> wrote: Yes, those are the ingredients I buy by the liter from STS. The mixing formula is shown

Contact STS Inks down in FL. Shoot email to Joe. I’ll not post his email here but it’s pretty easy to deduce from what I just said. MK = wj1082 PK = wj1122 glop = wj824 Double-check those with Joe

Slightly off subject, but where are folks sourcing their MK, PK , and glop for PK dilution from these days? ?I’m particularly interested in US based. ?So far I’ve only found OctoinkJet as a

I got the printing time with a Stouffer’s 31-step, and then used that time to determine the correct maximum blocking density for my printer

Hi Sayuri, Thanks very much for the info. At this stage there are pro’s and con’s to using Torelief plates. They may get rid of the measles problem but also may have a highlight ( tonality) issue

Hi David, I have finally received the pricing details from Dantex. The price for a sheet size WS .95 . = 215mm x 305mm Is : ?10.48 plus surcharge of 5.5% Plus delivery. If you are interested in

I determine exposure using a Stouffer TP4x5-31. wrote:

Did you calibrate your times with stouffer 31 step or did you print a 31 stepwedge and calibrate with It? I mean to get the printing times. In calvins guide he finds time with stouffer31. Thank

Eric, Looking at your original images the bands look approximately 1inch apart which is the head size. So my guess is that you are seeing the variation of the inkjets -- probably normal manufacturing

I found the same thing about the dMax. However, it printed perfectly when I followed Calvin’s instructions for the 7 layer monochrome. I arrived at this by actually making a test with layer one to

Hello, Clay. I have printed a step wedge with your calibration file and the Dmax is 1.60 i can't get more than that. I suspect that my film can't handle more ink. Or maybe your file was at 50% curve.

This is the carbon approach I've used for years now: https://www.paulroark.com/BW-Info/7800-9800-Glossy-Carbon-Variable-Tone.pdf The dual MK in this inkset is only for Arches watercolor paper,

my cartridges are super low and it's time to prep a new fill, which is why I'm looking to try a new configuration. How have you configured your cart positions?

Okay - scratch that as a possible cause! I’m stumped. ==================================== I have a ridiculous number of email accounts for lots of reasons. This email is the best one to use for

Thanks, all. All your answers will give my tech something to work with. Mind you, multiple times since being QTR-centric I have had to go in and change rewrite permissions on file folders but in that

Hi Clay, I only use Matte Black ink. Eric Verstuurd vanaf mijn iPhone

Question: does your DTP profile only use one ink? You mention three different print heads in your post. Unless you have a custom ink setup, you really should only be using matte black ink in a single

Hello Frankie and Eric I have tried different media settings and created my own? media settings for DTP and for film. The horizontal lines still appear, suspect it must be the QTR software as the

I have a text expander snippet for this because I have to answer it so often... The cause of all permissions problems is macOS updating and it reverting all the permissions that QuadToneRIP sets for

Permissions are an ongoing issue. Some setups are for one personal computer and others are for multiple people sharing printing -- like classes. The default in QTR is sharing access and control of