开云体育

Are you at work now? Do me a favor and right click on the quad you were using and see if it reverted to read only. That happened to me, and the result was very dense black ink negatives as if

Hello, Hoping for some insight/suggestions. This is in a school lab setting. Working with Print Tool and a P800 on a Mac Mini M1. IT forced another update, now to Sequioia 15.3.1. This resulted in

When I bought this 7880 for $100, it had been in storage for around a decade. Ink in the lines had evaporated. Still had the original OEM cartridges from 2010 in it. Original owner had run about 250

thanks Paul, that's actually remaining availability, I just replaced it. You'll see it's going down,. 24, 23, 22

Your printer may not be able to clean itself because your Maintenance Take is full. [image: image.png] Paul www.PaulRoark.com [email protected]> wrote:

Spoke too soon. gave it another chance of cleaning solution on paper towel and laying it flat under the print head while moving the print head, and another liberal spray of cleaning solution over the

Well, at this point, I've cleaned and checked everything. I'm suspecting that that area in the print head may not be usable. All is not lost. I still have 7 channels and can use this machine to print

Good advice Don, I’ll try that next. Thank you for the link.

Jeff When I have seen this on Epson 3880, P800, P900, P5300, its usually not the lines nor the damper. Its usually dried crud ink that is floating around the capping station and the bottom of the

update. I have ink flowing through the magenta line that was giving me problems, but I'm not able to get a proper nozzle check. I also ran a Magenta Flush image file and it was successfully printing

... working through getting that line to clear on the print head now. Slow going, but getting there. However, I have all the carts filled as per @Paul Roark's glossy variable setting. Will start

Here is a copy and paste from the v3 instructions from my support

Dear Kim: Yes, I bought cartridges with autoreset chips and the necessary inks. Carefully prepared the mixtures, filled the cartridges, primed them and use them in the R2880. So far it seems to work.

Hi ! Please find attached an email conversation (as a PDF file) I recently had with Richard Boutwell about the latest version of his software. I think you'll find answers to your questions in this

Dear Henrik, And do you use that ink in your Espon R2880? Or in a different printer?

Criss Hartzell, When I switched to this method my linearization was very quick and when scanning the 51 step step-wedge with my i1 Pro I ended up exactly following the green line in the

Yes, this confused me too. I made several curves for Pd/Pt and carbon by changing the total ink load to correspond to my blocking density. They worked ok, but, I noticed I was getting star wheel marks

If anyone out there is using the newest version of QuadToneProfiler-QuickCurve DN (version 3.1.3) by Richard Boutwell? ? I am wondering exactly where you are supposed to enter the Blocking Density

I was facing the same situation. I am now using the GCVT monochrome ink set of Paul Roark and getting acquainted with QTR.

They don't sell the original ink for my Epson R2880 anymore. And I've checked the Epson website for printers that use UltraChrome ink, but they don't sell them anymore in The Netherlands. Does anyone