开云体育

QTR on a Mac (14.7 - 15.2): Front feed is selected via: Printer Options > QuadToneRIP > Paper Feed. This works in Print Tool.

I am making digital negatives and need some help. I will explain below how I got to this place, but my immediate question is this: I created a .quad curve on a Mac using Richard Boutwell's Quad Tone

I got it working. Happy days. Thanks for your help Walker! I think mainly wot did it was buying a new - good quality - usb C to usb B cable with a ferrite choke on it. I had been using the usb A to

Hi Stig, thank you so much. Yes I had created a custom paper profile specifically for DTP and the issue only happened once till now. As we speak I'm waiting for some 2 ply mounting board to come

Hi Joe. 4 things you have to check/consider: 1; You have to create a Custom Paper Profile for the plates. Enhanced Matte Posterboard is approx 2 times as thick as your polymerplate. It is very

This rings true. Particularly the usb aspect - I noticed a few occasions when the Spectro lost its connection with the computer and had to be unplugged and replugged. I am running from a laptop. I've

Looks to me like there is some physical things going on . . . 1. Make sure you hold down the trigger while the i1 is entirely on the white of the paper (before hitting the patches). Make sure the

Cheers Walker. My reader bar does have the zebra strip. MXF file attached. This is a measurement of the Piezography 129 step chart for i1Pro 2 taken in scan mode. -- instagram.com/itsmrjack_ (

One thought I just had too . . . a few people have got i1s that don’t have the little black and white chart on the reader bar. There is a position sensor on the bottom of the i1 that reads a zebra

Hey Chris, Please attach the measurement data and I can see what is going on. Please include spectral values as well as the normal lab values too. An MXF file format is fine (this has spectral

I am getting a sawtooth/jagged line from my measurements of a test chart, when taking the measurements in scan mode, but not in spot mode. Using an ES-2000 spectro, measuring Piezography test charts

Hi Jess, First let me say that I am not a commercial fine art printing studio only a single person artist. So my needs, and solutions, are very specific, and in some ways similar to your

The new P 900 is absolutely fantastic for printing film in general i have both an old mac air i use with older epsons and a newer mac i use with the P900 Erika Greenberg-Schneider Chevalier de

Thanks for the reply Eben.? I've seen printers either on this group or a FB group write that they just disconnect it from the internet to avoid any updates of all software to be certain nothing

I'm trying to figure out why you want to disable the internet on this, and which version of OS X you want to use. I probably am misunderstanding your needs or plan.? But if I were setting up a print

Hello hive mind. I’m trying to avoid the issues with printing digital negatives on an Epson 3880 and Mac OS updates on my MacBook Pro.I have to update the MacBook Pro OS (for other reasons) and am

Same thing happened to me and it was a corrupted quad file. I made another one and it worked fine.

I have a strange problem. I built a new .quad and when I went to print it nothing was printed.? The printer load the paper, started the job, but there was no ink (I immediately aborted so as no to

I'm curious about this also, and I'm sure not the only one! many thanks to those working towards a fix or workarounds of the print preset issue ? -- itsmrjack.com ( https://itsmrjack.com

Each day seems to be different when it comes to starting out printing on polymer plates. Yesterday went fairly well, but today has been incredibly difficult. 1. When the P900 asks for what type of