开云体育

Hi Cheryl From what I've gathered (and it seems to be working, or improving) the P900 needs some time to "settle in". I followed some advice from various members in this group and printed a few

I’m having the same problem with my P900 - getting a deep gouge in the middle of the Toyota 93 plates. I bought my P900 in April and making plates worked well at first. Recently, I had to update

Hi Silvi, There has been a lot of discussion on this topic in the Epson Wide Format group on io. In case you do not have it, here is that link: /g/EpsonWideFormat

Hi, I'm wondering if anyone out there has worked out how to save printer settings presets? I'm using the Epson Quad driver with Sonoma 14.5. I have tried to set up the presets as a 'custom' as well as

Thanks all. I used a different curve and it worked. It was a corrupt quad file.

Yes I think he’s right. I tried to reload the same quad curve I’ve been using in QCDN and it wouldn’t load. Another loaded just fine. So going to try and print with another curve and see how it

My experience supports Roy’s comment. One of the curves I made just ejects and cuts the film on my Epson P5000. It was a third curve created based on a first and second curve that work just fine.

Thanks Roy I’ll give it a shot.

Bummer. Any word about QTR on Windows?

Clay, I dedicated an older iMac running Catalina (via a clean install). It is connected to a P6K running Piezography Pro inks so it is not even connected to the Internet (so no way Epson can

I ran across this notice ( https://gimp-print.sourceforge.io ) on the gutenprint forum, and I wonder what that means for the future of QTR on the Mac platform? We already get the notice about drivers

I’d guess the curve is bad. Try another curve - such as one of the built in ones. Roy [email protected]> wrote:

I have a linearized quad curve using the DN Pro program, Boost is near 100, how can I increase the ink load of density of the Fixxons neg without using any Magenta or Yellow ?? Thanks in advance

Hi all. I use an Epson 3880 to print digital negatives with using QCDN/QTR/PrintTool. I can print just fine if I choose the Epson 3880 printer in the print settings.? But out of the blue for some

Great, thank you

Same as .txt files: From the mac Tutorial for QTR: "a .txt or .qidf extension is an ink descriptor the " source " code for creating a profile; a .quad file is the " binary " profile format. The

Hi everyone, I recently downloaded several printing profiles for photopolymer plates, and they are in the .qidf format. Typically, the files I use for curve linearization are either .quad or .txt,

Thanks so much!

This article will explain the process very clearly. https://jkschreiber.wordpress.com/posts/

Hello everyone! How can I linearize with the spyder print spectrophotometer? I use QuadToneProfiler-Pro-DN by Richard Boutwell. Thanks for your help! Enrico