开云体育

I don’t think this is your problem but I ran across a problem with print-tool on some versions of macOS where the various margins ina custom page size would be applied to the wrong edge in the

I am using an Epson SureColor P900 printer, and recently upgraded to QuadToneRIP v2.8.2 and PrintTool v2/3/4/2. Mac OS Sierra (10.12.6). When I choose Quad900 as my printer, and choose QuadToneRIP

I have this issue, but it is not centered horizontally. There is a settings in general printer settings to turn horizontal center. It turn it off and on before every print. This is an issue with print

Thanks Frankie and Clay.? I do have a custom media profile set up for the 12x16 that the Epson seems ok with.? I've tried other images and have the same issue.? Even if I print on the poster board

You are probably already doing this, but you need to make sure you have a custom media type defined and downloaded to your printer that has a 12 x 16 inch size. You have to have the same media size

Hi Steve, Not familiar with DTP but it doesn't seems to be a software issue for me. I suppose it is related to the printer sensor that check the paper. I don't use the P900 so other may have a more

Hi folks – this is my first post. I’m just now learning DTP photogravure and platinum palladium using digital negatives. I’m working with (against) an Epson P900 with updated firmware via QTR

How does QTR behave with MacOs 15 Sequoia? And are there any other printing problems with this operating system. How about the saving and updating preset problem? best regards, Kees

? Exposure is with 150 watt Blue light grow bulb Thx SS

?

No screen shot came… From: [email protected] <[email protected]> on behalf of Steve Sherman via groups.io <steve@...> Date: Tuesday, October 15, 2024 at

Azo grade 2 ?

Can you send a screenshot of what the mapped curve looks like, like you did before? And are you exposing in the sun? My guess is you need to up your yellow with the yellow slider but won’t know

With the help of Chris Anderson’s Ilford Classic and Warm-tone quad files I’ve have had good success in linearizing D Neg files. Also, vintage Portriga Rapid linearized very easily. However,

Too late for me... I had no idea I'd lose functionality of Quad Tone RIP for Piezography fine-art B&W printing using my 2012 iMac earlier this year. I plan to get it down-graded to Mojave ASAP

My late-2012 27" iMac was functioning well as my Piezography printing computer until, apparently, one day a year or so ago when I upgraded its operating system beyond QTR's capacity for change. If

Thanks very much for great info to move forward !! SS Real Photographs are Born Wet !

Steve, You are correct. Yellow inks and magenta inks do filter light like yellow and magenta filters. But the balance in these profiles is there, and I always start with a no. 2 filter set in the

Thanks so much to Christina and Richard, I am very new to this D Neg and rely on Clay a lot. One thing, I see the Quads that were sent for both Classic and W-Tone Ilford silver papers have a small

Steve, I’m attaching my P900 quads that work well for these two papers. Try them and see if they work for you, but at the very least they will be a good starting point to print and run through QCDN