开云体育

Has anyone found success in finding a 401-size can? I have measured every can at our local WM and aside from the occasional 6" huge size, the largest I "can" find is the 307 size as shown. Our WM is

Even though this kit still has no formal build instructions I decided to go ahead with assembly using the Schematic & parts list. The kit included all parts needed and the tuna can. The kit has 3

I may have the manual? that was downloaded from your old site. I 'm on dialysis so 3 days a week are taken up but will get them on site files as soon as I can.

To answer your question directly, no there isn't a step by step guide for the RockMite][. All the documentation you need is on the QRPme website. One thing I would say is read the material thoroughly

No, you didn't overstep. I was making a point that EVERY document for QRPme kits is sitting somewhere on the QRPme.com website if it is in either mine or Chuck's computer. Occasionally, someone looks

All, Seems that I have accidently over stepped. Rex I was searching to see if there was a manual for the Rockmite ][ that was similar to the 49 page manual for the original Rockmite that had a

Gangue, Remember.... this [email protected] is an email forum/group. It is NOT my website! If you are looking for kits, instructions, schematics etc for a particular QRPme kit you really need to

Richard, I would be interested in a copy. Dan KD4VBV

Chuck, I have the original from w1rex if anyone is interested. And some extra stuff to like Crystal switching.

Daniel, The instructions are on the QRPme.com webpages for the version you have. -- Chuck, W5USJ

Hello Group, Several years ago I bought a QRPme Rockmite ][ kit to build but never got around to it.? Recently I pulled the kit out thinking to start the build but found that I do not have the

Replying to my own message. The Oscillator Fun kit is designed for audio frequencies. Is it possible we could have an Oscillator Fun kit that can be made for RF frequencies in the HF band as

Hello fans of the can, What would be a good QRPme radio kit to build next? I built the Two Tinned Tunas EZ Build transmitter.? ? And I have a Sea Sprite+ transceiver kit ordered for the Buildathon

Group, Then I asked: what about one using torroids? and got: A low pass filter using toroids can also be designed for the 20 meter ham band. Toroids are a type of magnetic core that can be used to

group, Just asked a question of chatGBT. What is a good design for a low power low pass filter for the 20 meter ham band and got: A low pass filter is a circuit that allows low frequency signals

Rex, Saw some doomsday predictions on the international state of affairs, esp China with population and workforce. Throw in a few wars and the shutdown of the Russian oil fields, which will take

I am starting building my Tuna Tunah as my 10W dummy load hasn't found too many signals across the pond. And by pond, I mean the one acre double pond at the treatment plant 100-feet to the north of

Rex, We hope UPS lands their Santa sleigh successfully. A neighborhood had to be evacuated in N IL because the ice stretched out the guy wires of a commercial TV station that has fallen a couple of

On 2/23/2023 11:52 AM, John Putnum, AC9UV wrote: > Chuck, > > That is why I mentioned it. You cut off 17ft for the CP and the rest is the antenna. Nice way to give you both and not need a feed

I edited my original subject which creates a new topic. I wanted to correct the type of antenna. The antenna will not be a Zepp. The antenna will be an End Fed Half-Wave Antenna for 40 meter ham