开云体育

Dongles,? I hate autocorrect

I have a good friend,? Tommy? Gober, N5DUX who is a volunteer instructor at the ARRL Teacher Institute every year. We have been batting around ideas for a project that will keep the interest going

I don't believe it is compatible with older AlexLoops, but I will take a closer look.? I have my 1st Gen AlexLoop here, but my 2nd Gen is in Chester.? I think the tuning box is nearly the same.??

Wow, the remote control box looks way cool! Clearly a ton of development. Any idea whether it is compatible with the previous version AlexLoop? You *must* view Alex's short videos on the loop

Now having a keeper tuning box, I decided to do a little experimentation on it. I believe as a result I found the cause of the tuning cap shorting problem. Best described in pix--see attached visual

(Long post (sorry) but interesting IMO). As mentioned, I returned my non-runner Alpha Loop antenna for a full and prompt refund. The problem was that one section of the tuning cap was shorting. Alpha

Very nice. Thank you for sharing. Doug

Thanks very much,

Hi Verne,? Elecraft K4D. 73, Eric NF6S ex WD6DBM ? On Sat, Jul 13, 2024 at 9:57 AM, Verne Anderson via groups.io<verneanderson@...> wrote: What radio are you using Eric? Nice display.

What radio are you using Eric? Nice display. -- Verne Anderson W6LPM,

Here's a short snippet. 73, Eric NF6S ex WD6DBM ?

Cliff, I didn't call, either.? In past years I have not been able to get through. Now I'm kicking myself for not trying RTTY! You can't miss that hard-keying sound! 73, Eric NF6S ex WD6DBM ? On

Hi Eric, Did you call on any of the ham frequencies? I had fldigi running CW decodes, K6KPH was perfect copy on 14050. The op is a good friend. But I chickened out. Listened to RTTY on 12585 for a

Good signal on 6MHz here tonight.?? 73, Eric NF6S ex WD6DBM ? On Thu, Jul 11, 2024 at 8:03 PM, Cliff Sojourner K6CLS via groups.io<cls@...> wrote: hey folks, not exactly QRP -

It will come as a shock to none of you that after learning of Alex's passing, I bought the latest version of the AlexLoop (that name was coined by Hiroki) complete with remote.?? Alex went through a

CapPlugs <<https://www.caplugs.com/>> is a manufacturer of the hard plastic (polyethylene) and the soft vinyl kind. These come on a lot of professional gear. They sell direct, but you can also find

Dxengigineering sells 20 for $12+.? They are $8.65 for bag of 100 at Mcmaster Carr, part number 9753K47.

Hi Dave! If you search for "dust caps" on dxengineering you'll turn some up. 73, Connie W6EFI

If they don't have to be soft, I could try to 3d print them. You'd need a 3d model though [email protected]> wrote:

I'm looking for some simple soft plastic end caps for SO-239 chassis connectors (pic) (have some metal ones). Do not need to be anti-static. Qty ~12. Having surprising difficulty finding them at