开云体育

Hi all SSB firmware was released into beta on 17-Mar-2025 after 9+ months of development. Many thanks to everyone who bravely helped test it and patiently provided their feedback and observations. There are now quite a few YouTube videos, forum reports and other social media mentions about on-air successes with QMX SSB. Now that it has been at least 6 weeks in beta and I believe most of the issues have been resolved, it's time to promote it to an official version. I have called this version 1_02_000 and published it on the QMX page http://qrp-labs.com/qmx where I have also published the updated operating manual, which grew from 111 pages to 134 pages. The main changes are: SSB (obviously!) including CESSB, TX Equalization, Mic AGC, VOX, Pre-distortion and and and... Addition of up to two more USB Virtual COM serial ports (up to three total). All of the hardware tests such as RF and SWR sweep, and Diagnostics, are now available on the LCD too. New CAT commands for LCD contents, S-meter, AGC-meter, Power meter, SWR meter, SSB source Complete list (relative to 1_00_027 the previous official version): SSB modes added (USB and LCB), with CESSB, TX Equalization, Mic AGC, VOX, Phase pre-distortion and more Rationalization of menus, grouped into CW, Digi and SSB submenus (now Keyer and Decoder are submenus of CW) Added up to two more USB Virtual COM serial ports (configurable) LCD versions of AF, RF, Image, LPF, Test ADC I/Q sweeps (miniature graph on LCD) New function PA mod. test to check operation of amplitude modulator Diagnostics screens are now available on the LCD interface too Now remembers previous menu location on ALL menus regardless of nesting level Add way of forcing factory reset, press Menu (left) button during power-up Change TX color in diagnostics screen from red to blue, to avoid confusion since red things are errors Added CAT LC command to retrieve LCD contents Added CAT commands SA (AGC meter), SM (S meter), PC (Power meter), SW (SWR meter) Added CAT command SS (get/set SSB input source) Bug fix: PTT P did not work properly Bug fix: Incorrect PA voltage display on the Diagnostics screen 73 Hans G0UPL http://qrp-labs.com https://www.buymeacoffee.com/g0upl

Hello All, In an unfortunate accident, I dropped my QMX+ pcb that I was working on and broke few of the toroids. Visually, other toroid looks ok. Can these broken toroids be salvaged? I Is there any website/ store in US that I can buy the new ones in small quantities( like 2-3 ) instead of buying 25 pcs? What other alternatives can I try to substitute these components? Your help is appreciated. 73 Subash KE2BKS

Hi, I recently finished building my qmx and after checking for shorts and not finding any I plugged it in but it draws too much current (200mA when applying 7V (which drop to 3.7V)). I can connect to the device via the serial console where it outputs the following data: Supply Voltage: 3.7 V 5V SMPS Status: Error Voltage: 3.34 V Duty max: 85 % Duty cycle: 85 % The 3V3 SMPS is working fine. When testing the 5V SMPS board it seemed to work. Any ideas where I should start looking? Cheers Lieven DF1CN

Hi everyone. With the release of the SSB firmware out of beta, I thought I would make my offer to source K6ARKs wonderful little microphones, which can be found here: https://www.printables.com/model/320559-mini-microphone-for-qmx-trusdx-usdx-kx2-and-kx3, one more time. Adam (K6ARK) made a super fantastic little miniature mic case, and they work with the QMX quite nicely. I print the cases in PLA, and have the following colors available: Black, White, Grey, Navy Blue, Orange, Light Green, Red, Gold, Purple, Sand Stone, Light Blue Stone, Turquoise stone, and Marble Stone (The stone colors look like marble or granite - little flecks of darker color in them - The marble one winds up looking like bleached bone). The kit includes: 3D Printed case in PLA 3.5mm jack Electret Mic Element Microswitch for PTT For each mic, $10 for kit, $15 fully assembled and tested. This price includes shipping in the US. I am happy to make you more than one, some people want one for home and one for the go bag, that's great. You will need to provide your own AUX cable (3.5mm male to male) to go between the mic and the radio. I have had several ask what cord I am using, So I have included this link to one I am using and that I test all my assembled mics with; it seems to work quite well: https://a.co/d/36GDDXf (This is a shortened, non-affiliated link to Amazon.com page for the cable I use) If you are interested, send me a private email, and I will send you payment details. My email address is good on QRZ.