开云体育

Hi all SSB firmware was released into beta on 17-Mar-2025 after 9+ months of development. Many thanks to everyone who bravely helped test it and patiently provided their feedback and observations. There are now quite a few YouTube videos, forum reports and other social media mentions about on-air successes with QMX SSB. Now that it has been at least 6 weeks in beta and I believe most of the issues have been resolved, it's time to promote it to an official version. I have called this version 1_02_000 and published it on the QMX page http://qrp-labs.com/qmx where I have also published the updated operating manual, which grew from 111 pages to 134 pages. The main changes are: SSB (obviously!) including CESSB, TX Equalization, Mic AGC, VOX, Pre-distortion and and and... Addition of up to two more USB Virtual COM serial ports (up to three total). All of the hardware tests such as RF and SWR sweep, and Diagnostics, are now available on the LCD too. New CAT commands for LCD contents, S-meter, AGC-meter, Power meter, SWR meter, SSB source Complete list (relative to 1_00_027 the previous official version): SSB modes added (USB and LCB), with CESSB, TX Equalization, Mic AGC, VOX, Phase pre-distortion and more Rationalization of menus, grouped into CW, Digi and SSB submenus (now Keyer and Decoder are submenus of CW) Added up to two more USB Virtual COM serial ports (configurable) LCD versions of AF, RF, Image, LPF, Test ADC I/Q sweeps (miniature graph on LCD) New function PA mod. test to check operation of amplitude modulator Diagnostics screens are now available on the LCD interface too Now remembers previous menu location on ALL menus regardless of nesting level Add way of forcing factory reset, press Menu (left) button during power-up Change TX color in diagnostics screen from red to blue, to avoid confusion since red things are errors Added CAT LC command to retrieve LCD contents Added CAT commands SA (AGC meter), SM (S meter), PC (Power meter), SW (SWR meter) Added CAT command SS (get/set SSB input source) Bug fix: PTT P did not work properly Bug fix: Incorrect PA voltage display on the Diagnostics screen 73 Hans G0UPL http://qrp-labs.com https://www.buymeacoffee.com/g0upl

Hi everyone, I recently completed building my QMX kit and it seemed to go well on the surface. The unit powers on just fine, the display works, menus respond, and voltages on the 3.3V and 5V SMPS look normal. However, I'm getting no power output on any band, and I haven't heard any received signals either (just noise). Here's what the diagnostics look like: I've verified all diode orientations match the silkscreen and build guide, and I've done my best to verify good continuity on the pads for all of the toroids. Maybe there's a bad solder joint somewhere less obvious. Does anyone have advice on where to look next or more checks you’d recommend to further narrow this down? Any help would be much appreciated! Thanks, Joe

It’s May, 2025! Time to take your Qrp-lab equipment outside and enjoy the coming summer, assuming you are in the northern hemisphere. If southern hemisphere, then get that last fling in before bad weather sets in.

Just wanted to share my 20V power supply solution that I made that works well for me. The upfront cost was $138 + tax, which includes a charger and a 96Wh portable Li-ion battery. Key features: ? Air travel approved (under 100WAh) ? Shock protected ? Uses 18650 Samsung cells ? Easy to charge ? Built-in charge display ? More compact than LiFePO? ? Weighs only 680g ? Dual purpose if you have other HF power tools. ? Comes with a 3-year warranty! A few photos: A shopping list:

Hi everyone. With the release of the SSB firmware out of beta, I thought I would make my offer to source K6ARKs wonderful little microphones, which can be found here: https://www.printables.com/model/320559-mini-microphone-for-qmx-trusdx-usdx-kx2-and-kx3, one more time. Adam (K6ARK) made a super fantastic little miniature mic case, and they work with the QMX quite nicely. I print the cases in PLA, and have the following colors available: Black, White, Grey, Navy Blue, Orange, Light Green, Red, Gold, Purple, Sand Stone, Light Blue Stone, Turquoise stone, and Marble Stone (The stone colors look like marble or granite - little flecks of darker color in them - The marble one winds up looking like bleached bone). The kit includes: 3D Printed case in PLA 3.5mm jack Electret Mic Element Microswitch for PTT For each mic, $10 for kit, $15 fully assembled and tested. This price includes shipping in the US. I am happy to make you more than one, some people want one for home and one for the go bag, that's great. You will need to provide your own AUX cable (3.5mm male to male) to go between the mic and the radio. I have had several ask what cord I am using, So I have included this link to one I am using and that I test all my assembled mics with; it seems to work quite well: https://a.co/d/36GDDXf (This is a shortened, non-affiliated link to Amazon.com page for the cable I use) If you are interested, send me a private email, and I will send you payment details. My email address is good on QRZ.

How would one use a ProgRock2 in a Colpitts crystal oscillator? A crystal is essentially an LC circuit, while the ProgRock outputs a square wave. Can the ProgRock2 simply replace the crystal? If so, will the Colpitts circuit turn it into a sine wave? Does the ProgRock2 start up at the last frequency used before its last power down? Steve, N9SZ

When Elecraft introduced the KH1 a year ago, I was immediately enthusiastic about the concept. A small and lightweight shortwave radio with an integrated telescopic antenna. This means that, weighing less than 400g, it can be used in any suitable location on shortwave. So I wanted to build something myself. I immediately began my own experiments with telescopic antennas for 7-30 MHz. This confirmed that a counterweight is absolutely necessary. This wire, which is a quarter of the wavelength long, contributes significantly to the radiated energy. So the idea arose to forgo the telescopic antenna and experiment with end-fed wires twice the length. Of course, it makes sense to stretch the wire as high as possible. But I also got respectable reports with EFHW lying on the ground or in bushes. In this place the antenna may detunes itself, so a tuner is necessary, as well as the standard 1:64 transformer (Unun). The tried-and-tested resonance circuit (Fuchs Kreis) performs both tasks. Once the antenna issue was resolved, QRP Labs brought out the QMX. The ideal TRX for my projects, and now even capable of SSB. Now all that was missing was a suitable housing with an integrated battery and a speaker with an amplifier. Then a paddle for CW as a contactless touch key directly on the device. And the QMX Carrot was finished. But it wasn’t that simple, because everything had to be as small and light as possible. It now weighs 340g and measures 15x8.5x3.0 cm. I’m happy with that. 73 Chris https://youtu.be/0kksiWVOtnQ