开云体育

WSPR without GPS unit

John Sharman #46041 Hi I have been trying to set up WSPR on the QCX and have the following display WSPR call (without error) but cannot get it to transmit I cannot figure out what I am during wrong the start time is set and frame time is set The display does not change to give the WSPR info at the set time Any ideas??? John
Dean Smith All Messages By This Member #46043 In the call menu item, put a space in front of ur callsign...
Mike Besemer - WM4B All Messages By This Member #46046 You have your call entered incorrectly. Refer to Page 94 (Menu 6.6) of the manual. Mike WM4B toggle quoted message Show quoted text -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Sharman via groups.io Sent: Monday, May 4, 2020 12:04 PM To: [email protected] Subject: [QRPLabs] WSPR without GPS unit Hi I have been trying to set up WSPR on the QCX and have the following display WSPR call (without error) but cannot get it to transmit I cannot figure out what I am during wrong the start time is set and frame time is set The display does not change to give the WSPR info at the set time Any ideas??? John
John Sharman #46048 开云体育 Many thanks works like a dream now Must have missed something in the write up!!! 73”蝉 John toggle quoted message Show quoted text On 4 May 2020, at 17:20, Dean Smith <bardezbiker@...> wrote: In the call menu item, put a space in front of ur callsign...
Vernon Matheson #46060 John did you turn beacon mode on in the menu. Vernon toggle quoted message Show quoted text On 2020-05-04 16:03, John Sharman via groups.io wrote: Hi I have been trying to set up WSPR on the QCX and have the following display WSPR call (without error) but cannot get it to transmit I cannot figure out what I am during wrong the start time is set and frame time is set The display does not change to give the WSPR info at the set time Any ideas??? John
Mike Perry, WA4MP All Messages By This Member #146176 I had a similar problem but the screens said "WSPR Power" rather than "WSPR Call". Over and over again I re-entered my call sign, getting no change. Then I realized that "WSPR Power" needed to be taken literally. I had entered "35" for the power despite the fact that the instructions clearly said, "WSPR powers are constrained to certain values 0, 3, 7, 10, 13, 17, 20, 23, 27, 30, 33, 37, 40, 43, 47, 50, 53, 57 and 60dBm." ? I changed the number to "33" and all is well. ? When all else fails... read the instructions carefully and literally.

Previous Topic Next Topic