开云体育

Had some good contacts with my 80m QCX CW TRX but having saved a message I cannot find how to send it. There must be an easy solution ?

Roger Taylor
G4CGU
.

Hello, Roger.
From the QCX 'Cheat sheet' :
Encoder dbl or long press: choose stored message. Then Left to send repeatedly, Centre to send once, or Right to cancel?

I would only add that, immediately after "Encoder dbl or long press", rotate Encoder to select stored message 1 through 12.

72 / 73,
Bill, N4QA

Actually, for me sometimes the message does not start to send. I then can select it, but no matter what I press afterwards, the transmission just does not start – it goes back to the normal frequency display. Switching off and on fixes this. I have not yet systematically looked into that issue, if e.g. the action before or the keyer mode ("practice on") has an influence on this behavior.

73 de DG2FDD, Jens

Thanks Bill for your reply, yes you were correct I should have fully scrutinised the manual. As my old boss used to say "if in doubt go back and read the instructions". Unforetunatley the rig no longer transmits so I am now trying to find some one locally to help me.

73 Roger G4CGU