Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Screening Changes
|
"Tom"
--- In QRPLabs@..., Hans Summers <hans.summers@...> wrote:
Please can you let me know what improvements you think would be good on the------------------------------- I was somewhat confused on what holes on the LPF boards to stick the toroid wires through. Also, some of the holes were somewhat filled with solder plating making it difficult to put the wires through. There isn't a lot of room on the board for screening though... |
|
John Randall
Tom, I think that on the LPF boards, the "overkill" silk screening showing the inductors, could be used to show an image of the US resistor sysmbol, but marked as L1, L2 etc, indicating exactly which holes to use ( ie the wire ends starting and ending over the holes ). This would be a lot clearer for those who are not used to working with kits. 73 John ? Digitally signed mail - M0ELS From: Tom To: QRPLabs@... Sent: Friday, 26 July 2013, 21:04 Subject: [QRPLabs] Screening Changes
?
--- In QRPLabs@..., Hans Summers wrote: > Please can you let me know what improvements you think would be good on the > silkscreen? I found the printing quality was excellent on all the boards I... ------------------------------- I was somewhat confused on what holes on the LPF boards to stick the toroid wires through. Also, some of the holes were somewhat filled with solder plating making it difficult to put the wires through. There isn't a lot of room on the board for screening though... |
to navigate to use esc to dismiss