|
Hi?Torbjorn,
I'll send what I've got direct.
73,
Dave
|
Hi Dave,
It seems from the picture that you have a 3D model of the QCX itself. Could you share it, or point me to the source? I am planning a QCX case with built-in paddles and GPS, if time permits.
Torbjorn, LA4ZCA
|
Hi Kent - let me check it out.? I'm using Cura 3.0.1 - but have been looking to bite the bullet and upgrade.
I'll try to get back to you in the next day but have some domestics to sort out.
73,
Dave
On Tuesday, 2 January 2018, 13:11, Kent Vanderploeg <kvanderploeg@...> wrote:
Dave,
I'm having an issue with the "qcx_case_top_back.stl" and "qcx_case_bottom.stl".? Neither of these show or print standoffs.? Maybe it's an issue with Cura 3.1 that I'm using?? Again, I'm sorry if I'm missing something simple.? I'm still pretty new to this.? Thank you!
73,
Kent
W9WB
|
Dave,
I'm having an issue with the "qcx_case_top_back.stl" and "qcx_case_bottom.stl".? Neither of these show or print standoffs.? Maybe it's an issue with Cura 3.1 that I'm using?? Again, I'm sorry if I'm missing something simple.? I'm still pretty new to this.? Thank you!
73,
Kent
W9WB
|
Hi Mike, you HAVE read the caveat that I haven't printed this version yet - although it looks fine in an assembled model with my board reference model.
For the short case you need:
1 off?qcx_case_bottom_shortDRAFT.stl 1 off?qcx_case_top_back_shortDRAFT.stl 1 off?qcx_case_top_frontV2.stl 2 off?qcx_case_tact.stl Optional is 1 off?qcx_case_pot_shim.stl? ?This part makes the gain pot more suitable for a grub screw knob.
Don't print?qcx_case_short_draft.stl..? This is the bits assembled as an illustration
Happy the email direct if you have any more questions.
73, Dave
On Tuesday, 12 December 2017, 12:32, "zfreak@..." <zfreak@...> wrote:
Hi Dave, I'd like to have the "short" case printed for me by the local library, but I'm not sure which of the files listed on thingiverse I would need to submit.? Thanks for any advice you can give. Mike M. KU4QO
|
Hi Dave, I'd like to have the "short" case printed for me by the local library, but I'm not sure which of the files listed on thingiverse I would need to submit.? Thanks for any advice you can give. Mike M. KU4QO
|
Hi Dave - glad you were able to use the STEP files.? Could you let me see the changes you made (STEP would be great) in case this would help others.? I'd also love to see a photo.? Perhaps you could document a 'I made one'? on Thingiverse.
73, Dave
On Tuesday, 12 December 2017, 3:09, Dave Miller <ve7hr@...> wrote:
Yes I printed 1. ? Found a couple of snags but easy to fix with file. ? If I recall the cutout for the power connector needed some adjustment and the cutout for the LCD needed enlarging. ? But overall a nice enclosure. ? I printed it for a buddy as my QCX is in the to build pile Dave VE7HR.? Sent from my iPhone
On Dec 11, 2017, at 7:01 PM, somersdave@... wrote: Has anyone tried the short version yet? I prefer to have power source outside the transceiver box.
If not, I will be attempting the short version when my printer arrives. Probably a Christmas break job....
Dave
KI7DPP
|
Yes I printed 1. ? Found a couple of snags but easy to fix with file. ? If I recall the cutout for the power connector needed some adjustment and the cutout for the LCD needed enlarging. ? But overall a nice enclosure. ? I printed it for a buddy as my QCX is in the to build pile Dave VE7HR.? Sent from my iPhone
toggle quoted message
Show quoted text
On Dec 11, 2017, at 7:01 PM, somersdave@... wrote: Has anyone tried the short version yet? I prefer to have power source outside the transceiver box.
If not, I will be attempting the short version when my printer arrives. Probably a Christmas break job....
Dave
KI7DPP
|
Has anyone tried the short version yet? I prefer to have power source outside the transceiver box.
If not, I will be attempting the short version when my printer arrives. Probably a Christmas break job....
Dave
KI7DPP
|
Dear Group - added new version of the case to??
This version is to G8MXV's specification and includes more room for the lipo, an on/off switch, battery supports to stop the lipo wandering and no microswitch or DC apertures.?
This version has been printed and assembled.? Everything fits!??
Details in zip file on Thingiverse plus photo in main file section.
73,
Dave, G8XUL
|
I have had the regular CR-10 for about 6 months now that I have been pretty happy with.? Probably about the usual number of issues and tinkering required.? I just ordered the second Z axis drive, so more tinkering is coming my way soon.
I'm currently working on a case and knobs for my NorCal 40A build.? I'd have to move a lot of components off the QCX PCB to use it for the QCX.? We'll see...? Only about 300 more kits to go before mine gets shipped.
--
John Sutter
W1JDS CM87xi
|
Dipping my whole foot with a Creality CR-10S4. Its currently on a GearBest slow boat from China but after I get it calibrated, first useful print will be a QCX case or three....
?
73's
Dave
KI7DPP
|
Hi Kurt - I'm sorry but I can't give a recommendation but only my experience.
I bought a Anet A8 kit from Gearbest.? It wasn't a challenge to assemble.? The prints I get are very usable.? The printer cost me ?110 and the play value is immense.
As you say over the water - I've learned a lot.
Google will give you all the latest greatest - twin extruders, self levelling beds etc if you want something better.
I wanted to dip my toe at the minimum cost - and haven't been disappointed.
Dip a toe
73, Dave
On Thursday, 30 November 2017, 19:21, Kurt Zimmerman <kurt@...> wrote:
OK so I an new to 3d printing although I certainly understand the
technology.? What is the 3d printer of choice these daya?
Thanks in advance.
73;
Kurt - W2MW
-------- Original Message --------
Subject: Re: [QRPLabs] QCX 3D print
Date: Thu, November 30, 2017 12:44 pm
Dear group,
I have added? a V2 top front case file to Thingiverse.? I had some print
problems with the original although it worked ok with some cleanup. This
version prints great for me with 20% grid support. You need to cut out
the very thin disk in the Gain control recess after printing.? Based on
much good forum feedback. Thanks guys.
QRP Labs QCX case by G8XUL
? ? ? ? ? ? ?
?
? ? ? ? ? QRP Labs QCX case by G8XUL This is my attempt at a case for
the very excellent QRP Labs QCX transceiver. I'm very new to this so
maybe...
?
?
73
Dave G8XUL
On Tuesday, 21 November 2017, 16:06, DAVE JAMES
My QCX in 3D printed case.? The objective was to case the QCX with all
controls mounted on the board and without shaft extensions.? The box has
room for a LIPO battery and has a connector for my GPS.
73,
Dave
G8XUL
|
OK so I an new to 3d printing although I certainly understand the
technology. What is the 3d printer of choice these daya?
Thanks in advance.
73;
Kurt - W2MW
toggle quoted message
Show quoted text
-------- Original Message -------- Subject: Re: [QRPLabs] QCX 3D print From: "DAVE JAMES" <dave.james@...> Date: Thu, November 30, 2017 12:44 pm To: [email protected]Dear group, I have added a V2 top front case file to Thingiverse. I had some print problems with the original although it worked ok with some cleanup. This version prints great for me with 20% grid support. You need to cut out the very thin disk in the Gain control recess after printing. Based on much good forum feedback. Thanks guys. QRP Labs QCX case by G8XUL QRP Labs QCX case by G8XUL This is my attempt at a case for the very excellent QRP Labs QCX transceiver. I'm very new to this so maybe... 73 Dave G8XUL On Tuesday, 21 November 2017, 16:06, DAVE JAMES <dave.james@...> wrote: My QCX in 3D printed case. The objective was to case the QCX with all controls mounted on the board and without shaft extensions. The box has room for a LIPO battery and has a connector for my GPS. 73, Dave G8XUL
|
Thanks for the tip Kevin.
Paul
|
Paul
Most model aircraft shops or online sell them. I got mine from hobby king.
73
Kevin
G8MXV
Sent from my iPad
|
Dave,
Do you have a suggestion and source for the LIPO battery that will fit in the larger case?
thanks,
Paul K0ZYV
|
That's the same one I have. A couple of upgrades I made and I highly reccomed if you haven't made them are the all metal micro swiss hot end and a piece of borosilicate glass for the print bed. I also HIGHLY recommend Makergeeks filament.? Chauncey Baker
KD5JBK
EM15hl Cleveland County Oklahoma
SKCC#17411
On Nov 23, 2017 10:35 AM, "Kent Vanderploeg" < kvanderploeg@...> wrote: Will do!? I have a Maker Select V2 waiting.? I'm sure I'll have a bit of a learning curve and time into dialing in the proper print settings.? Thank you again!
Kent
W9WB
|
Will do!? I have a Maker Select V2 waiting.? I'm sure I'll have a bit of a learning curve and time into dialing in the proper print settings.? Thank you again!
Kent
W9WB
|
Love the short version, Dave.? Again, thank you!? Hoping to get my printer dialed in shortly after Christmas, but this will likely be one of my first prints!??
|
Dave Somers KI7DPP
Kurt Zimmerman