开云体育

iFTX

Luis Rogelio Galina All Messages By This Member #130117 Has anyone had experience with QMX + iFTX with the virtual USB port? The costs that apply US$ 1.99 are annual or monthly, I can't find this thread on my iPhone 72 Luis
Mark Knight All Messages By This Member #130121 Hi Luis -? ? I've used iFTX with my QMX using a USB-C to USB-C cable. Haven't made a video on it yet, but it works like a champ. Just requires setting a few threshold values correctly for Vox. Worth the $1.99 ;) ? 73, Mark ?
Mike Black #130123 It's a 1-time $1.99. And what virtual USB port are you talking about? The app gives 3 choices #1 Hold the? phone up to the radio (yuck!) #2 Build a custom cable to hook up audio to your headset jack #3 Use a Digilink Nano or Signalink and a USB adapter for your IPad or IPhone and make sure it can provide enough current to power the Digilink/Signalink Mike W9MDB On Friday, September 20, 2024 at 07:50:11 AM CDT, Luis Rogelio Galina <lu4hk@...> wrote: Has anyone had experience with QMX + iFTX with the virtual USB port? The costs that apply US$ 1.99 are annual or monthly, I can't find this thread on my iPhone 72 Luis
Jay Gustin All Messages By This Member #130130 All you need are USB A to C cable and an Iphone camera adapter. Works well with my QMX (not plus). Also have used it with a trusdx, USB audio adapter and iphone camera adapter and also?a QCX/USDX.?VOX is required if all cases.? 73.? toggle quoted message Show quoted text On Friday, September 20, 2024, 6:50 AM, Mike Black via groups.io <mdblack98@...> wrote: It's a 1-time $1.99. And what virtual USB port are you talking about? The app gives 3 choices #1 Hold the? phone up to the radio (yuck!) #2 Build a custom cable to hook up audio to your headset jack #3 Use a Digilink Nano or Signalink and a USB adapter for your IPad or IPhone and make sure it can provide enough current to power the Digilink/Signalink Mike W9MDB On Friday, September 20, 2024 at 07:50:11 AM CDT, Luis Rogelio Galina <lu4hk@...> wrote: Has anyone had experience with QMX + iFTX with the virtual USB port? The costs that apply US$ 1.99 are annual or monthly, I can't find this thread on my iPhone 72 Luis -- Jginaz
Luis Rogelio Galina All Messages By This Member #130156 Hello ! It doesn't work for me from ligthing to USB C, I would have to buy an OTG adapter if I understand correctly toggle quoted message Show quoted text El El vie, 20 sept 2024 a la(s) 11:35, Jay Gustin via <jginaz=[email protected]> escribió: All you need are USB A to C cable and an Iphone camera adapter. Works well with my QMX (not plus). Also have used it with a trusdx, USB audio adapter and iphone camera adapter and also?a QCX/USDX.?VOX is required if all cases.? 73.? On Friday, September 20, 2024, 6:50 AM, Mike Black via <mdblack98=[email protected]> wrote: It's a 1-time $1.99. And what virtual USB port are you talking about? The app gives 3 choices #1 Hold the? phone up to the radio (yuck!) #2 Build a custom cable to hook up audio to your headset jack #3 Use a Digilink Nano or Signalink and a USB adapter for your IPad or IPhone and make sure it can provide enough current to power the Digilink/Signalink Mike W9MDB On Friday, September 20, 2024 at 07:50:11 AM CDT, Luis Rogelio Galina <lu4hk@...> wrote: Has anyone had experience with QMX + iFTX with the virtual USB port? The costs that apply US$ 1.99 are annual or monthly, I can't find this thread on my iPhone 72 Luis -- Jginaz
Jay Gustin All Messages By This Member #130157 Here?? This?is the camera adapter I used toggle quoted message Show quoted text On Friday, September 20, 2024, 8:58 PM, Luis Rogelio Galina <lu4hk@...> wrote: Hello ! It doesn't work for me from ligthing to USB C, I would have to buy an OTG adapter if I understand correctly El El vie, 20 sept 2024 a la(s) 11:35, Jay Gustin via <jginaz=[email protected]> escribió: All you need are USB A to C cable and an Iphone camera adapter. Works well with my QMX (not plus). Also have used it with a trusdx, USB audio adapter and iphone camera adapter and also?a QCX/USDX.?VOX is required if all cases.? 73.? On Friday, September 20, 2024, 6:50 AM, Mike Black via <mdblack98=[email protected]> wrote: It's a 1-time $1.99. And what virtual USB port are you talking about? The app gives 3 choices #1 Hold the? phone up to the radio (yuck!) #2 Build a custom cable to hook up audio to your headset jack #3 Use a Digilink Nano or Signalink and a USB adapter for your IPad or IPhone and make sure it can provide enough current to power the Digilink/Signalink Mike W9MDB On Friday, September 20, 2024 at 07:50:11 AM CDT, Luis Rogelio Galina <lu4hk@...> wrote: Has anyone had experience with QMX + iFTX with the virtual USB port? The costs that apply US$ 1.99 are annual or monthly, I can't find this thread on my iPhone 72 Luis -- Jginaz -- Jginaz
Luis Rogelio Galina All Messages By This Member #130158 Yes !!!! toggle quoted message Show quoted text El El sáb, 21 sept 2024 a la(s) 01:32, Jay Gustin via <jginaz=[email protected]> escribió: Here?? This?is the camera adapter I used On Friday, September 20, 2024, 8:58 PM, Luis Rogelio Galina <lu4hk@...> wrote: Hello ! It doesn't work for me from ligthing to USB C, I would have to buy an OTG adapter if I understand correctly El El vie, 20 sept 2024 a la(s) 11:35, Jay Gustin via <jginaz=[email protected]> escribió: All you need are USB A to C cable and an Iphone camera adapter. Works well with my QMX (not plus). Also have used it with a trusdx, USB audio adapter and iphone camera adapter and also?a QCX/USDX.?VOX is required if all cases.? 73.? On Friday, September 20, 2024, 6:50 AM, Mike Black via <mdblack98=[email protected]> wrote: It's a 1-time $1.99. And what virtual USB port are you talking about? The app gives 3 choices #1 Hold the? phone up to the radio (yuck!) #2 Build a custom cable to hook up audio to your headset jack #3 Use a Digilink Nano or Signalink and a USB adapter for your IPad or IPhone and make sure it can provide enough current to power the Digilink/Signalink Mike W9MDB On Friday, September 20, 2024 at 07:50:11 AM CDT, Luis Rogelio Galina <lu4hk@...> wrote: Has anyone had experience with QMX + iFTX with the virtual USB port? The costs that apply US$ 1.99 are annual or monthly, I can't find this thread on my iPhone 72 Luis -- Jginaz -- Jginaz
K O K3OX All Messages By This Member #130167 Just be aware that iFTX (at least as of 4 to 5 months ago) does not work quite like the FT8 developers designed WSJT. You may like it, I found it frustrating operationally. ? 73, Kevin K3OX
Luis Rogelio Galina All Messages By This Member #130170 FT8cn is even more frustrating toggle quoted message Show quoted text El El sáb, 21 sept 2024 a la(s) 11:25, K O K3OX via <kolson=[email protected]> escribió: Just be aware that iFTX (at least as of 4 to 5 months ago) does not work quite like the FT8 developers designed WSJT. You may like it, I found it frustrating operationally. ? 73, Kevin K3OX
VA3CJO - Chris "CJ" All Messages By This Member #130174 Others already pointed you to the right adaptors. ? I'll add that I often use iFTx with an iPhone and it works well, with a caveat: Apple places artificial limitations on the iPhone and it won't do CAT control. ? To get PTT working, you set the QMX to "VOX" as was pointed out earlier in this discussion. You may have to tweak some threshold values on the QMX to make this work smoothly. ? Further, since there's no CAT control, you have to manually select the band in the iFTx app, and set the band/frequency on the QMX. (e.g.: you set iFTx to 20m band, manually change the QMX to "14.074MHz", the standard 20m FT8 frequency) You can make this less cumbersome by saving all the FT8 and FT4 standard frequencies as on the QMX and just toggling between them. ? Note that you don't have to adjust this when you change the transmit tone. The app will adjust the tone to whatever you've set (say, "1500Hz"), similar to operating in "Fake It" mode in WSJT-x instead of full "Split" mode. ? ?
Luis Rogelio Galina All Messages By This Member #130179 Your comments are greatly appreciated!!!! 72 Luis El El sáb, 21 sept 2024 a la(s) 13:27, VA3CJO - Chris "CJ" via <va3cjo=[email protected]> escribió: toggle quoted message Show quoted text Others already pointed you to the right adaptors. ? I'll add that I often use iFTx with an iPhone and it works well, with a caveat: Apple places artificial limitations on the iPhone and it won't do CAT control. ? To get PTT working, you set the QMX to "VOX" as was pointed out earlier in this discussion. You may have to tweak some threshold values on the QMX to make this work smoothly. ? Further, since there's no CAT control, you have to manually select the band in the iFTx app, and set the band/frequency on the QMX. (e.g.: you set iFTx to 20m band, manually change the QMX to "14.074MHz", the standard 20m FT8 frequency) You can make this less cumbersome by saving all the FT8 and FT4 standard frequencies as on the QMX and just toggling between them. ? Note that you don't have to adjust this when you change the transmit tone. The app will adjust the tone to whatever you've set (say, "1500Hz"), similar to operating in "Fake It" mode in WSJT-x instead of full "Split" mode. ? ?
Luis Rogelio Galina All Messages By This Member #130382 Today I received the iPhone to camera adapter but the connection with the QMX has not worked. It is as if the application does not recognize the USB port, enable vox but since there is no connection to the phone there is no activity. If you listen to the ft8 through the iPhone microphone, I tested it with a USB audio card and the camera adapter and it works fine. I don't know if there is something I'm doing wrong? greetings Luis toggle quoted message Show quoted text El El sáb, 21 sept 2024 a la(s) 14:00, Luis Rogelio Galina via <lu4hk=[email protected]> escribió: Your comments are greatly appreciated!!!! 72 Luis El El sáb, 21 sept 2024 a la(s) 13:27, VA3CJO - Chris "CJ" via <va3cjo=[email protected]> escribió: Others already pointed you to the right adaptors. ? I'll add that I often use iFTx with an iPhone and it works well, with a caveat: Apple places artificial limitations on the iPhone and it won't do CAT control. ? To get PTT working, you set the QMX to "VOX" as was pointed out earlier in this discussion. You may have to tweak some threshold values on the QMX to make this work smoothly. ? Further, since there's no CAT control, you have to manually select the band in the iFTx app, and set the band/frequency on the QMX. (e.g.: you set iFTx to 20m band, manually change the QMX to "14.074MHz", the standard 20m FT8 frequency) You can make this less cumbersome by saving all the FT8 and FT4 standard frequencies as on the QMX and just toggling between them. ? Note that you don't have to adjust this when you change the transmit tone. The app will adjust the tone to whatever you've set (say, "1500Hz"), similar to operating in "Fake It" mode in WSJT-x instead of full "Split" mode. ? ?
Luis Rogelio Galina All Messages By This Member #130386 It worked perfectly, I just had to reset the cell phone to take the hardware changes. In QMX it activates the ptt but in the Xiegu x6100 it doesn't because it doesn't have vox!! 73 Luis? toggle quoted message Show quoted text El El mié, 25 sept 2024 a la(s) 15:26, Luis Rogelio Galina via <lu4hk=[email protected]> escribió: Today I received the iPhone to camera adapter but the connection with the QMX has not worked. It is as if the application does not recognize the USB port, enable vox but since there is no connection to the phone there is no activity. If you listen to the ft8 through the iPhone microphone, I tested it with a USB audio card and the camera adapter and it works fine. I don't know if there is something I'm doing wrong? greetings Luis El El sáb, 21 sept 2024 a la(s) 14:00, Luis Rogelio Galina via <lu4hk=[email protected]> escribió: Your comments are greatly appreciated!!!! 72 Luis El El sáb, 21 sept 2024 a la(s) 13:27, VA3CJO - Chris "CJ" via <va3cjo=[email protected]> escribió: Others already pointed you to the right adaptors. ? I'll add that I often use iFTx with an iPhone and it works well, with a caveat: Apple places artificial limitations on the iPhone and it won't do CAT control. ? To get PTT working, you set the QMX to "VOX" as was pointed out earlier in this discussion. You may have to tweak some threshold values on the QMX to make this work smoothly. ? Further, since there's no CAT control, you have to manually select the band in the iFTx app, and set the band/frequency on the QMX. (e.g.: you set iFTx to 20m band, manually change the QMX to "14.074MHz", the standard 20m FT8 frequency) You can make this less cumbersome by saving all the FT8 and FT4 standard frequencies as on the QMX and just toggling between them. ? Note that you don't have to adjust this when you change the transmit tone. The app will adjust the tone to whatever you've set (say, "1500Hz"), similar to operating in "Fake It" mode in WSJT-x instead of full "Split" mode. ? ?
W8JH All Messages By This Member #134572 I’m anxiously awaiting the arrival of my QMX+ and assume this should also work on the + model.? If no one can confirm this I will do so in about a month.? -- 73, W8JH, Joe

Previous Topic Next Topic