I emailed these changes/errors through some months ago, but I see that they are unchanged in 1_00_027.
Page 5, last paragraph in the section 'CAT control - PC Control commands', shouldn't WXJT-X be WSJT-X?
Page 10, dot point about the mode indicator, 'tranceiver' should be 'transceiver'
Page 19, Section 5.7, in the first paragraph below the display screenshot, 'stright' should be 'straight'
Page 21, bottom section of the page, the paragraph begins 'To provide a for selection', it should be 'To provide for a selection'
Page 22, in the third last paragraph on that page 'Goerzel' should 'Goertzel'
Page 25, in point 2), 2nd last paragraph on Page 25 is "2) Key in the desired text on the straight Morse key on the board, or using your external paddle.". Is the reference to the 'key on the board' a leftover from the QCX unit? I don't think there is an on-board straight key on the QMX.
Page 29, 5.12 Keyer menu, the paragraph beginning with 'In the even that you press", should be 'In the event that you press'.
Page 34, in the paragraph below the Advance config! screenshot 'Anvanced' should be 'Advanced'
Page 55, last paragraph on that page, 'multiplixer' should be 'multiplexor'
Page 59, paragraph numbered 16, last line in that paragraph, 'onfigurationGain' should be 'ConfigurationGain'
Page 60, paragraph numbered 22, 'procssed' should be 'processed'
Page 82, 2nd paragraph above the sweep plot, 'The filters are not very very sharp', delete repeated 'very'
Page 89, Section 8.6.6 Test ADC I/Q, paragraph numbered 1, 'Bnad' should be 'Band'
Page 103, near the top in Get: Returns:, for the description of KY2, 'emtpy' should be 'empty'
?
Most of these were picked up using a spell checker.
I find it odd that, given the number of units sold/built/used, that others are not coming across these.
73 Fred VK2WS
Dave WI6R