开云体育

Band chosen at start up

Carlos Gorjao All Messages By This Member #16101 Hi all ... My kit after have been assembled at the start up jumped directly to a VFO frequency ( showing A 28..... MHz ) without stop in the band option as said on the manual which is " 80 m band " . My kit has to be tuned for 20 m band .... what to do to choose the right band ? Thanks! 73 de Carlos Enviado do meu iPhone
G0DZB All Messages By This Member #16102 On Wed, 2017-09-13 at 06:47 +0100, Carlos Gorjao wrote: Hi all ... My kit after have been assembled at the start up jumped directly to a VFO frequency ( showing A 28..... MHz ) without stop in the band option as said on the manual which is " 80 m band " . My kit has to be tuned for 20 m band .... what to do to choose the right band ? Thanks! I think the "reset" menu option will cause a "choose the band" to happen on the next power up. Otherwise just set on of the presets to a frequency in the desired band and copy the preset to the VFO. Tedious but it does get you "on the air". I had to do this at one point while testing firmware for Hans. PeterO G0DZB
Hans Summers All Messages By This Member #16103 Hi Carlos I agree with what Peter said; additionally, this problem was resolved with the later firmware. But it is an inconvenience only. When you select the band, it defaults the VFO A, VFO B, Frequency presets, and calibration frequencies to your chosen band. Tuning these manually into the desired band has the same result.? 73 Hans G0UPL toggle quoted message Show quoted text On Wed, Sep 13, 2017 at 9:39 AM, G0DZB <g0dzb@...> wrote: On Wed, 2017-09-13 at 06:47 +0100, Carlos Gorjao wrote: > Hi all ... > My kit after have been assembled at the start up jumped directly to a VFO frequency ( showing A 28..... MHz ) without stop in the band option as said on the manual which is " 80 m band " . My kit has to be tuned for 20 m band .... what to do to choose the right band ? > Thanks! I think the "reset" menu option will cause a "choose the band" to happen on the next power up. Otherwise just set on of the presets to a frequency in the desired band and copy the preset to the VFO.? Tedious but it does get you "on the air". I had to do this at one point while testing firmware for Hans. PeterO G0DZB
Carlos Gorjao All Messages By This Member #16105 开云体育 Thanks guys !? But I can't find the "reset" procedure in the manual !!!? 73 de Carlos Enviado do meu iPhone No dia 13/09/2017, às 08:13, Hans Summers <hans.summers@...> escreveu: toggle quoted message Show quoted text Hi Carlos I agree with what Peter said; additionally, this problem was resolved with the later firmware. But it is an inconvenience only. When you select the band, it defaults the VFO A, VFO B, Frequency presets, and calibration frequencies to your chosen band. Tuning these manually into the desired band has the same result.? 73 Hans G0UPL On Wed, Sep 13, 2017 at 9:39 AM, G0DZB <g0dzb@...> wrote: On Wed, 2017-09-13 at 06:47 +0100, Carlos Gorjao wrote: > Hi all ... > My kit after have been assembled at the start up jumped directly to a VFO frequency ( showing A 28..... MHz ) without stop in the band option as said on the manual which is " 80 m band " . My kit has to be tuned for 20 m band .... what to do to choose the right band ? > Thanks! I think the "reset" menu option will cause a "choose the band" to happen on the next power up. Otherwise just set on of the presets to a frequency in the desired band and copy the preset to the VFO.? Tedious but it does get you "on the air". I had to do this at one point while testing firmware for Hans. PeterO G0DZB
G0DZB All Messages By This Member #16106 On Wed, 2017-09-13 at 10:38 +0100, Carlos Gorjao wrote: Thanks guys ! But I can't find the "reset" procedure in the manual !!! Manual section 4.25 "Other menu" Page 94 in manual Rev 1.05 Menu entry "7.8 Factory rst. Sure? enter 17" PeterO G0DZB
Daniel Ekman SA2KNG All Messages By This Member #16109 The menu option 7.8 does not exist in the early (at least <90) units. The procedure I came up with was to hold down PTT during boot, it says reset... then OK and powers up, but this requires a trick to really clear to defaults. Power it up and hold the PTT, wait until you see the Reset message and unplug power before "OK" shows up. The next power up you can select band. You may need to time this correct.
Carlos Gorjao All Messages By This Member #16111 Thanks Peter You're right it is there .... I was blind at 1:30 am .... I'm gonna try ! Thanks 73 Carlos Enviado do meu iPhone No dia 13/09/2017, às 10:51, G0DZB <g0dzb@...> escreveu: toggle quoted message Show quoted text On Wed, 2017-09-13 at 10:38 +0100, Carlos Gorjao wrote: Thanks guys ! But I can't find the "reset" procedure in the manual !!! Manual section 4.25 "Other menu" Page 94 in manual Rev 1.05 Menu entry "7.8 Factory rst. Sure? enter 17" PeterO G0DZB
Carlos Gorjao All Messages By This Member #16114 ... TNX Daniel Mine was 162 nd ...Tricky !! 73 de Carlos CT7AFN toggle quoted message Show quoted text On Wed, Sep 13, 2017 at 12:09 PM, Daniel Ekman (kng) <knegge@...> wrote: The menu option 7.8 does not exist in the early (at least <90) units. The procedure I came up with was to hold down PTT during boot, it says reset... then OK and powers up, but this requires a trick to really clear to defaults. Power it up and hold the PTT, wait until you see the Reset message and unplug power before "OK" shows up. The next power up you can select band. You may need to time this correct.

Previous Topic Next Topic